Optimization Analysis on Dynamic Reduction Algorithm

On the basis of rough set theory, the strengths of dynamic reduction are elaborated compared with traditional non-dynamic methods. A systematic concept of dynamic reduction from sampling process to the generation of the reduct set is presented. A new method of sampling is created to avoid the defects of being too subjective. And in order to deal with the over-sized time consuming problem in traditional dynamic reduction process, a quick algorithm is proposed within the constraint conditions. We have also proved that dynamic core possesses the essential characteristics of a reduction core on the basis of the formalized definition of the multi-layered dynamic core.

Dynamic Soft Reduction for Continuously Cast Rail Bloom

Center porosity and centerline segregation in continuously cast bloom can be minimized by the well-known method of dynamic soft reduction. Metallurgical results of soft reduction previously employed in continuous bloom casting for heavy rail steel in Panzhihua Iron and Steel Group were not fully achieved because of the improper soft reduction process. Therefore, experiments for optimizing the process parameters of soft reduction for bloom were carried out. The results show that the proportion of the center porosity, which is less than 1.0, increases from 28.41% to 99.81%, while the proportion of the centerline segregation class increases from 40.91% to 100%, and the proportion of the central cavity increases from 92.05% to 100%, whereas the center carbon segregation index decreases from 1.17 to 1.05. The internal quality and the mechanical performance of the rails produced from continuously cast blooms meet the requirement of high-speed tracks of 350 km/h.

SMART/ASTC dynamic soft reduction technology and its application on the bloom continuous caster at Pangang

The SMART/ASTC dynamic soft reduction technology of VAI and its application on the 6-strand bloom continuous caster at Pangang, China are presented. The operation results show that soft reduction technology is effective to improve the inner quality of continuously cast blooms. At Pangang, both the central porosity and the central segregation ratings are no more than 1.0, the central shrinkage cavity rating is no more than 0.5, and the central segregation index of carbon is no more than 1.05. Rails made from the blooms have excellent quality and are used for high-speed tracks.

Application of strength reduction method to dynamic anti-sliding stability analysis of high gravity dam with complex dam foundation

Considering that there are some limitations in analyzing the anti-sliding seismic stability of dam-foundation systems with the traditional pseudo-static method and response spectrum method, the dynamic strength reduction method was used to study the deep anti-sliding stability of a high gravity dam with a complex dam foundation in response to strong earthquake-induced ground action. Based on static anti-sliding stability analysis of the dam foundation undertaken by decreasing the shear strength parameters of the rock mass in equal proportion, the seismic time history analysis was carried out. The proposed instability criterion for the dynamic strength reduction method was that the peak values of dynamic displacements and plastic strain energy change suddenly with the increase of the strength reduction factor. The elasto-plastic behavior of the dam foundation was idealized using the Drucker-Prager yield criterion based on the associated flow rule assumption. The result of elasto-plastic time history analysis of an overflow dam monolith based on the dynamic strength reduction method was compared with that of the dynamic linear elastic analysis, and the reliability of elasto-plastic time history analysis was confirmed. The results also show that the safety factors of the dam-foundation system in the static and dynamic cases are 3.25 and 3.0, respectively, and that the F2 fault has a significant influence on the anti-sliding stability of the high gravity dam. It is also concluded that the proposed instability criterion for the dynamic strength reduction method is feasible.

Modeling and control of dynamic soft reduction in continuous slab casting

The centerline segregation in continuous casting steel is known to be formed by the interdendritic enriched liquid flow at the solidification end in strand.At present,several methods,such as thermal soft reduction, electromagnetic stirring and dynamic soft reduction,are available to reduce the center segregation and to improve the internal quality.Although some methods could alleviate center segregation to some extent,they can also give rise to new problems.For instance,thermal soft reduction can lead to surface cracking during casting of some steels and electromagnetic stirring can result in white band.Dynamic soft reduction is an effective technology for the improvement of strand quality in continuous slab casting.In this paper,the key parameters of dynamic soft reduction technology,such as soft reduction region,the total reduction amount,for low carbon steel have been studied based on experimental and theoretical analysis.The soft reduction region was related to the segregation of chemical composition,slab bulging of narrow side and avoiding internal crack of slab.The total reduction amount was composed of natural thermal shrinkage and actual reduction amount depending on critical strain.For low carbon steel with slab dimension of(950 - 1 950) mm×170 mm,the solid fraction range in soft reduction region was recommended from 0.4 to 0.8,the total reduction amount was 2.0 -2.8 mm,and the optimized reduction rate was 0.4 - 1.2 mm/min,respectively.Furthermore,a dynamic soft reduction system in continuous slab casting, Visual Cast-Dynamic,has been developed by multithreading method.It demonstrated that the dynamic soft reduction model in this study was correct with the ability of online control.

Methods of reduction for Lagrange systems on time scales with nabla derivatives

The Routh and Whittaker methods of reduction for Lagrange system on time scales with nabla derivatives are studied.The equations of motion for Lagrange system on time scales are established, and their cyclic integrals and generalized energy integrals are given. The Routh functions and Whittaker functions of Lagrange system are constructed, and the order of differential equations of motion for the system are reduced by using the cyclic integrals or the generalized energy integrals with nabla derivatives. The results show that the reduced Routh equations and Whittaker equations hold the form of Lagrnage equations with nabla derivatives. Finally, two examples are given to illustrate the application of the results.

Dynamic Soft Reduction Technology for Bloom Casting

The dynamic soft reduction technology for 360 mm×450 mm bloom casting and its application results at Panzhihua Iron and Steel Co （PISCO） were presented. In order to analyze the influence of the soft reduction on internal defects of bloom, such as center porosity and central segregation, experiment for contrasting process with or without soft reduction for bloom was conducted. The operation shows that after applying the soft reduction of alloy steel 45CrMnMo bloom, the ratio of center porosity whose defect level is less than or equal to 1.0 increased from 66.67% to 85.71%, ratio of central segregation whose defect level is below 1.0 increased from 94.44% to 100%, ratio of central shrinkage cavity which is free increased from 88.89% to 96.42%, and central segregation index of carbon decreased from mean value of 1.15 to 1.05.

Control Model of Bloom Dynamic Soft Reduction

There are significant effects of process parameters on internal qualities of bloom, and these process parameters are as follows. position and reduction amount, reduction distribution, reduction rate, and so on. Developing a control model is the key to apply soft reduction technology successfully. As the research object, 360 mm ×450 mm bloom caster in PISCO （Panzhihua Iron and Steel Co. ） has been studied, and the research method for control model of dynamic soft reduction has been proposed. On the basis of solidification and heat transfer model, the position of soft reduction and reduction distribution of each frame are determined according to the bloom temperature distribution and solid fraction in bloom center calculated. Production practice shows that the ratio of center porosity which is less than or equal to 1.0, increased to 97.27%, ratio of central segregation which is less than or equal to 0.5, increased to 80.91%, and ratio of central carbon segregation index which is more than or equal to 1.10, decreased to 4% with the applying model of dynamic soft reduction.

Unravelling charge carrier dynamics in protonated g-C3N4 interfaced with carbon nanodots as co-catalysts toward enhanced photocatalytic CO2 reduction： A combined experimental and first-principles DFT study

In this work, we demonstrated the successful construction of metal-free zero- dimensional/two-dimensional carbon nanodot （CND）-hybridized protonatedg=C3N4 （pCN） （CND/pCN） heterojunction photocatalysts b; means of electrostatic attraction. We experimentally found that CNDs with an average diameter of 4.4 nm were uniformly distributed on the surface of pCN using electron microscopy analysis. The CND/pCN-3 sample with a CND content of 3 wt.% showed thehighest catalytic activity in the CO2 photoreduction process under visible and simulated solar light. This process results in the evolution of CH4 and CO. Thetotal amounts of CH4 and CO generated by the CND/pCN-3 photocatalyst after 10 h of visible-light activity were found to be 29.23 and 58.82 molgcatalyst-1, respectively. These values were 3.6 and 2.28 times higher, respectively, than thearn＊ounts generated when using pCN alone. The corresponding apparent quantum efficiency （AQE） was calculated to be 0.076%. Furthermore, the CND/pCN-3 sample demonstrated high stability and durability after four consecutive photoreaction cycles, with no significant decrease in the catalytic activity.

Asymmetric synthesis of syn-aryl-(2S,3R)-2-chloro-3-hydroxy esters via an engineered ketoreductase-catalyzed dynamic reductive kinetic resolution

We report here a generic,green synthesis of 17 valuable syn-aryl-(2S,3R)-2–chloro-3–hydroxy esters(syn-(2S,3R)-1)in 73%-99%isolated yields along with 6.1:1–83:1 dr and 31%~>99%ee,through dynamic reductive kinetic resolution of racemic arylα–chloroβ-keto esters(2)catalyzed by an engineered ketoreductase which was obtained via ep PCR-based directed evolution.The hectogram scale synthesis of syn-(2S,3R)-1b at a substrate concentration of 120 g/L showcased the application potential of the biocatalytic method developed presently.

A New Clock Gated Flip Flop for Pipelining Architecture

The objective of the work is to design a new clock gated based flip flop for pipelining architecture. In computing and consumer products, the major dynamic power is consumed in the system’s clock signal, typically about 30% to 70% of the total dynamic (switching) power consumption. Several techniques to reduce the dynamic power have been developed, of which clock gating is predominant. In this work, a new methodology is applied for gating the Flip flop by which the power will be reduced. The clock gating is employed to the pipelining stage flip flop which is active only during valid data are arrived. The methodology used in project named Selective Look-Ahead Clock Gating computes the clock enabling signals of each FF one cycle ahead of time, based on the present cycle data of those FFs on which it depends. Similarly to data-driven gating, it is capable of stopping the majority of redundant clock pulses. In this work, the circuit implementation of the various blocks of data driven clock gating is done and the results are observed. The proposed work is used for pipelining stage in microprocessor and DSP architectures. The proposed method is simulated using the quartus for cyclone 3 kit.

CFD Study of NO_x Emissions in a Model Commercial Aircraft Engine Combustor

Air worthiness requirements of the aircraft engine emission bring new challenges to the combustor research and design. With the motivation to design high performance and clean combustor, computational fluid dynamics （CFD） is utilized as the powerful design approach. In this paper, Reynolds averaged Navier-Stokes （RANS） equations of reactive two-phase flow in an experimental low emission combustor is performed. The numerical approach uses an implicit compressible gas solver together with a Lagrangian liquid-phase tracking method and the extended coherent flamelet model for turbulence-combustion interaction. The NOx formation is modeled by the concept of post-processing, which resolves the NOx transport equation with the assumption of frozen temperature distribution. Both turbulence-combustion interaction model and NOx formation model are firstly evaluated by the comparison of experimental data published in open literature of a lean direct injection （LDI） combustor. The test rig studied in this paper is called low emission stirred swirl （LESS） combustor, which is a two-stage model combustor, fueled with liquid kerosene （RP-3） and designed by Beihang University （BUAA）. The main stage of LESS combustor employs the principle of lean prevaporized and premixed （LPP） concept to reduce pollutant, and the pilot stage depends on a diffusion flame for flame stabili-zation. Detailed numerical results including species distribution, turbulence performance and burning performance are qualita-tively and quantitatively evaluated. Numerical prediction of NOx emission shows a good agreement with test data at both idle condition and full power condition of LESS combustor. Preliminary results of the flame structure are shown in this paper. The flame stabilization mechanism and NOx reduction effort are also discussed with in-depth analysis.

Kinetic Characteristics Analysis of Aircraft During Heavy Cargo Airdrop

Airdrop is the most important approach for crisis transaction and unexpected events, it is necessary to investigate the flight characteristics of transport aircraft during the dropping process. This paper mainly focuses on the stability, controllability and model simplification of large aircraft with heavy cargo airdrop. In this process, the primary elements which have impact on force and moment are studied theoretically, the role of cargo mass, moving parameters and other factors on dynamical characteristics have been assessed by simulation and analysis. And then the aircraft model simplification is completed for control system designing in future.All the work above shows that the parameters of cargo moving play a dominant role in flight characteristics and the flight equations can be simplified to reduce the design complexity.