Floquet dynamical quantum phase transitions in transverse XY spin chains under periodic kickings

Floquet dynamical quantum phase transitions(DQPTs),which are nonanalytic phenomena recuring periodically in time-periodic driven quantum many-body systems,have been widely studied in recent years.In this article,the Floquet DQPTs in transverse XY spin chains under the modulation ofδ-function periodic kickings are investigated.We analytically solve the system,and by considering the eigenstate as well as the ground state as the initial state of the Floquet dynamics,we study the corresponding multiple Floquet DQPTs emerged in the micromotion with different kicking moments.The rate function of return amplitude,the Pancharatnam geometric phase and the dynamical topological order parameter are calculated,which consistently verify the emergence of Floquet DQPTs in the system.

Dynamical quantum phase transition in XY chains with the Dzyaloshinskii-Moriya and XZY-YZX three-site interactions

We study the dynamical quantum phase transitions(DQPTs)in the XY chains with the Dzyaloshinskii-Moriya interaction and the XZY-YZX type of three-site interaction after a sudden quench.Both the models can be mapped to the spinless free fermion models by the Jordan-Wigner and Bogoliubov transformations with the form■where the quasiparticle excitation spectraεkmay be smaller than 0 for some k and are asymmetrical■It is found that the factors of Loschmidt echo equal 1 for some k corresponding to the quasiparticle excitation spectra of the pre-quench Hamiltonian satisfyingε_(k)·ε_(-k)<0,when the quench is from the gapless phase.By considering the quench from different ground states,we obtain the conditions for the occurrence of DQPTs for the general XY chains with gapless phase,and find that the DQPTs may not occur in the quench across the quantum phase transitions regardless of whether the quench is from the gapless phase to gapped phase or from the gapped phase to gapless phase.This is different from the DQPTs in the case of quench from the gapped phase to gapped phase,in which the DQPTs will always appear.Moreover,we analyze the different reasons for the absence of DQPTs in the quench from the gapless phase and the gapped phase.The conclusion can also be extended to the general quantum spin chains.

2.5Gb/s 0.18μm CMOS Clock and Data Recovery Circuit

A 2.5Gb/s clock and data recovery （CDR） circuit is designed and realized in TSMC＇s standard 0.18/μm CMOS process. The clock recovery is based on a PLL. For phase noise optimization,a dynamic phase and frequency detector （PFD） is used in the PLL. The rms jitter of the recovered 2.5GHz clock is 2.4ps and the SSB phase noise is - 111dBc/Hz at 10kHz offset. The rms jitter of the recovered 2.5Gb/s data is 3.3ps. The power consumption is 120mW.

Distinct dynamic phases observed in bacterial microcosms

Predicting biodiversity and dynamics of complex communities is a fundamental challenge in ecology.Leveraging bacterial microcosms with well-controlled laboratory conditions,Hu et al.recently performed a direct test of theory predicting that two community-level parameters(i.e.,species pool size and inter-species interaction strength)dictate transitions between three dynamical phases:stable full coexistence,stable partial coexistence,and persistent fluctuations.Generally,communities experience species extinctions before they lose stability as either of the two parameters increases.

Dynamic phase assembled terahertz metalens for reversible conversion between linear polarization and arbitrary circular polarization

If a metalens integrates the circular polarization(CP)conversion function,the focusing lens together with circular-polariz-ing lens(CPL)in traditional cameras may be replaced by a metalens.However,in terahertz(THz)band,the reported metalenses still do not obtain the perfect and strict single-handed CP,because they were constructed via Pancharatnam-Berry phase so that CP conversion contained both left-handed CP(LCP)and right-handed CP(RCP)components.In this paper,a silicon based THz metalens is constructed using dynamic phase to obtain single-handed CP conversion.Also,we can rotate the whole metalens at a certain angle to control the conversion of multi-polarization states,which can simply manipulate the focusing for incident linear polarization(LP)THz wave in three polarization conversion states,in-cluding LP without conversion,LCP and RCP.Moreover,the polarization conversion behavior is reversible,that is,the THz metalens can convert not only the LP into arbitrary single-handed CP,but also the LCP and RCP into two perpen-dicular LP,respectively.The metalens is expected to be used in advanced THz camera,as a great candidate for tradi-tional CPL and focusing lens group,and also shows potential application in polarization imaging with discriminating LCP and RCP.

Self-assembly of Binary Particles with Electrostatic and van der Waals Interactions

Nanoparticles with competitive interactions in solution can aggregate into complex structures. In this work, the synergistic self-assembles of binary particles with electrostatic and van der Waals interactions are studied with the particle Langevin dynamics simulation using a simple coarse-grained particle model. Various aggregations such as spherical, stacking-disk and tube structures are observed by varying the particles size and the interaction strength. The aggregation structures are explained with the packing theories of amphiphilic molecules in solution and dibolck copolymers in bulk. When the opposite ions are introduced into solution, the distribution of structures in the phase diagram appears an obvious offset. The simulation result is helpful to deeply understand the formation mechanism of complex nanostructures of multicomponent particles in solution.

Effect of Gd content on microstructure and dynamic mechanical properties of solution-treated Mg−xGd−3Y−0.5Zr alloy

The effect of Gd content ranging from 6.5 wt.%to 8.5 wt.%on microstructure evolution and dynamic mechanical behavior of Mg−xGd−3Y−0.5Zr alloys was investigated by optical microscopy,X-ray diffraction,scanning electron microscopy and split Hopkinson pressure bar.The microstructure of as-cast Mg−xGd−3Y−0.5Zr alloys indicates that the addition of Gd can promote grain refinement in the casting.Due to the rapid cooling rate during solidification,a large amount of non-equilibrium eutectic phase Mg_(24)(Gd,Y)_(5) appears at the grain boundary of as-cast Mg−xGd−3Y−0.5Zr alloys.After solution treatment at 520℃ for 6 h,the Mg_(24)(Gd,Y)_(5) phase dissolves into the matrix,and the rare earth hydrides(REH)phase appears.The stress−strain curves validate that the solution-treated Mg−xGd−3Y−0.5Zr alloys with optimal Gd contents maintain excellent dynamic properties at different strain rates.It was concluded that the variation of Gd content and the agglomeration of residual REH particles and dynamically precipitated fine particles are key factors affecting dynamic mechanical properties of Mg−xGd−3Y−0.5Zr alloys.

Critical Spreading of Active Region in a Ladder Model Possessing Infinite AbsorbingStates

The spreading of active region of the ladder model is simulated. Finite-time scaling behaviors are observedin the vicinity of the critical point.

Formation of adiabatic shearing band for high-strength Ti-5553 alloy:A dramatic thermoplastic microstructural evolution

By using split Hopkinson pressure bar, optical microscopy and electronic microscopy, we investigate the influence of initial microstructures on the adiabatic shear behavior of high-strength Ti-5Al-5V-5Mo-3Cr(Ti-5553) alloy with lamellar microstructure and bimodal microstructure. Lamellar alloy tends to form adiabatic shearing band(ASB) at low compression strain, while bimodal alloy is considerably ASBresistant. Comparing with the initial microstructure of Ti-5553 alloy, we find that the microstructure of the ASB changes dramatically. Adiabatic shear of lamellar Ti-5553 alloy not only results in the formation of recrystallized β nano-grains within the ASB, but also leads to the chemical redistribution of the alloying elements such as Al, V, Cr and Mo. As a result, the alloying elements distribute evenly in the ASB.In contrast, the dramatic adiabatic shear of bimodal alloy might give rise to the complete lamination of the globular primary a grain and the equiaxial prior β grain, which is accompanied by the dynamic recrystallization of a lamellae and β lamellae. As a result, ASB of bimodal alloy is composed of a/β nanomultilayers. Chemical redistribution does not occur in ASB of bimodal alloy. Bimodal Ti-5553 alloy should be a promising candidate for high performance armors with high mass efficiency due to the processes high dynamic flow stress and excellent ASB-resistance.

Deviation of Carbon Dioxide-Water Gas-Liquid Balance from Thermodynamic Equilibrium in Turbulence h Experiment and Correlation

The carbon dioxide-water system was used to investigate the flowing gas-liquid metastable state. The experiment was carded out in a constant volume vessel with a horizontal circulation pipe and a peristaltic pump forced CO2 saturated water to flow. The temperature and pressure were recorded. The results showed that some CO2 escaped from the water in the flow process and the pressure increased, indicating that the gas-liquid equilibrium was broken. The amount of escaped CO2 varied with flow speed and reached a limit in a few minutes, entitled dy- namic equilibrium. Temperature and liquid movement played the same important role in breaking the phase equilib- rium. Under the experimental conditions, the ratio of the excessive carbon dioxide in the gas phase to its thermody- namic equilibrium amount in the liquid could achieve 15%.

Demage Spreading in the Ising Model with a special Metropolis Dynamics Approach

The time evolution of the Hamming distance (damage spreading) for the and Ising models on the square lattice is performed with a special metropolis dynamics algorithm. Two distinct regimes are observed according to the temperature range for both models: a low-temperature one where the distance in the long-time limit is finite and seems not to depend on the initial distance and the system size; a high-temperature one where the distance vanishes in the long-time limit. Using the finite size scaling method, the dynamical phase transition (damage spreading transition) temperature is obtained as for the Ising model.

Dynamic phase transition of ferroelectric nanotube described by a spin-1/2 transverse Ising model

The dynamic phase transition properties for ferroelectric nanotube under a spin-1/2 transverse Ising model are studied under the effective field theory(EFT)with correlations.The temperature effects on the pseudo-spin systems are unveiled in three-dimensional(3-D)and two-dimensional(2-D)phase diagrams.Moreover,the dynamic behaviors of exchange interactions on the 3-D and 2-D phase transitions under high temperature are exhibited.The results present that it is hard to obtain pure ferroelectric phase under high temperature;that is,the vibration of orderly pseudo-spins cannot be eliminated completely.

Numerical method for simulating rarefaction shocks in the approximation of phase-flip hydrodynamics

A finite-difference algorithm is proposed for numerical modeling of hydrodynamic flows with rarefaction shocks, in which the fluid undergoes a jump-like liquid-gas phase transition. This new type of flow discontinuity, unexplored so far in computational fluid dynamics, arises in the approximation of phase-flip(PF) hydrodynamics, where a highly dynamic fluid is allowed to reach the innermost limit of metastability at the spinodal, upon which an instantaneous relaxation to the full phase equilibrium(EQ) is assumed. A new element in the proposed method is artificial kinetics of the phase transition, represented by an artificial relaxation term in the energy equation for a "hidden"component of the internal energy, temporarily withdrawn from the fluid at the moment of the PF transition. When combined with an appropriate variant of artificial viscosity in the Lagrangian framework, the latter ensures convergence to exact discontinuous solutions, which is demonstrated with several test cases.

Radiation reaction induced spiral attractors in ultra-intense colliding laser beams

The radiation reaction effects on electron dynamics in counter-propagating circularly polarized laser beams are investigated through the linearization theorem and the results are in great agreement with numeric solutions.For the first time,the properties of fixed points in electron phase-space were analyzed with linear stability theory,showing that center nodes will become attractors if the classical radiation reaction is considered.Electron dynamics are significantly affected by the properties of the fixed points and the electron phase-space densities are found to be increasing exponentially near the attractors.The density growth rates are derived theoretically and further verified by particle-in-cell sim-ulations,which can be detected in experiments to explore the effects of radiation reaction qualitatively.The attractor can also facilitate realizing a series of nanometer-scaled flying electron slices via adjusting the colliding laser frequencies.

NANOSCALE CUTTING OF MONOCRYSTALLINE SILICON USING MOLECULAR DYNAMICS SIMULATION

It has been found that the brittle material, monocrystalline silicon, can be machined in ductile mode in nanoscale cutting when the tool cutting edge radius is reduced to nanoscale and the undeformed chip thickness is smaller than the tool edge radius. In order to better understand the mechanism of ductile mode cutting of silicon, the molecular dynamics （MD） method is employed to simulate the nanoscale cutting of monocrystalline silicon. The simulated variation of the cutting forces with the tool cutting edge radius is compared with the cutting force results from experimental cutting tests and they show a good agreement. The results also indicate that there is silicon phase transformation from monocrystalline to amorphous in the chip formation zone that can be used to explain the cause of ductile mode cutting. Moreover, from the simulated stress results, the two necessary conditions of ductile mode cutting, the tool cutting edge radius are reduced to nanoscale and the undeformed chip thickness should be smaller than the tool cutting edge radius, have been explained.

Fast speedometer identification in dynamic scene based on phase correlation

Speedometer identification has been researched for many years.The common approaches to that problem are usually based on image subtraction,which does not adapt to image offsets caused by camera vibration.To cope with the rapidity,robust and accurate requirements of this kind of work in dynamic scene,a fast speedometer identification algorithm is proposed,it utilizes phase correlation method based on regional entire template translation to estimate the offset between images.In order to effectively reduce unnecessary computation and false detection rate,an improved linear Hough transform method with two optimization strategies is presented for pointer line detection.Based on VC＋＋ 6.0 software platform with OpenCV library,the algorithm performance under experiments has shown that it celerity and precision.

Nonequilibrium behavior of the kinetic metamagnetic spin-5/2 Blume–Capel model

The dynamic magnetic behavior of the kinetic metamagnetic spin-5/2 Blume-Capel model is examined, within a mean-field approach, under a time-dependent oscillating magnetic field. To describe the kinetics of the system, Glauber- type stochastic dynamics has been utilized. The mean-field dynamic equations of the model are obtained from the Master equation. Firstly, these dynamic equations are solved to find the phases in the system. Then, the dynamic phase transition temperatures are obtained by investigating the thermal behavior of dynamic sublattice magnetizations. Moreover, from this investigation, the nature of the phase transitions （first- or second-order） is characterized. Finally, the dynamic phase diagrams are plotted in five different planes. It is found that the dynamic phase diagrams contain the paramagnetic （P）, antiferromagnetic （AF5/2, AF3/2, AF1/2） phases and five different mixed phases. The phase diagrams also display many dynamic critical points, such as tricritical point, triple point, quadruple point, double critical end point and separating point.

Stochastic resonance and nonequilibrium dynamic phase transition of Ising spin system driven by a joint external field

The dynamic response and stochastic resonance of a kinetic Ising spin system （ISS） subject to the joint action of an external field of weak sinusoidal modulation and stochastic white-nolse are studied by solving the mean-field equation of motion based on Glauber dynamics. The periodically driven stochastic ISS shows that the characteristic stochastic resonance as well as nonequilibrium dynamic phase transition （NDPT） occurs when the frequency ω and amplitude h0 of driving field, the temperature t of the system and noise intensity D are all specifically in accordance with each other in quantity. There exist in the system two typical dynamic phases, referred to as dynamic disordered paramagnetic and ordered ferromagnetic phases respectively, corresponding to a zero- and a unit-dynamic order parameter. The NDPT boundary surface of the system which separates the dynamic paramagnetic phase from the dynamic ferromagnetic phase in the 3D parameter space of ho-t-D is also investigated. An interesting dynamical ferromagnetic phase with an intermediate order parameter of 0.66 is revealed for the first time in the ISS subject to the perturbation of a joint determinant and stochastic field. The intermediate order dynamical ferromagnetic phase is dynamically metastable in nature and owns a peculiar characteristic in its stability as well as the response to external driving field as compared with a fully order dynamic ferromagnetic phase.

Magnetic Properties of Transverse Ising Model under a Time Oscillating Longitudinal Field

A transverse Ising spin system, in the presence of time-dependent longitudinal field, is studied by the effective-field theory （EFT）. The effective-field equations of motion of the average magnetization are given for the simple cubic lattice （Z ---- 6） and the honeycomb lattice （Z = 3）. The Liapunov exponent A is calculated for discussing the stability of the magnetization and it is used to determine the phase boundary. The dynamic phase transition diagrams in ho/ZJ - F/ZJ plane and in ho/ZJ - T/ZJ plane have been drawn, and there is no dynamical tricritical point on the dynamic phase transition boundary. The effect of the thermal fluctuations upon the dynamic phase boundary has been discussed.

The dynamic compensation temperature in a kinetic spin-5/2 Ising model on a hexagonal lattice

We present a study of the dynamic behavior of a two-sublattice spin-5/2 Ising model with bilinear and crystal-field interactions in the presence of a time-dependent oscillating external magnetic field on alternating layers of a hexagonal lattice by using the Glauber-type stochastic dynamics.The lattice is formed by alternate layers of spins σ=5/2 and S=5/2.We employ the Glauber transition rates to construct the mean-field dynamic equations.First,we investigate the time variations of the average sublattice magnetizations to find the phases in the system and then the thermal behavior of the dynamic sublattice magnetizations to characterize the nature（first-or second-order） of the phase transitions and to obtain the dynamic phase transition（DPT） points.We also study the thermal behavior of the dynamic total magnetization to find the dynamic compensation temperature and to determine the type of the dynamic compensation behavior.We present the dynamic phase diagrams,including the dynamic compensation temperatures,in nine different planes.The phase diagrams contain seven different fundamental phases,thirteen different mixed phases,in which the binary and ternary combination of fundamental phases and the compensation temperature or the L-type behavior strongly depend on the interaction parameters.