Dynamic Analysis of A Deepwater Drilling Riser with A New Hang-off System

The safety of risers in hang-off states is a vital challenge in offshore oil and gas engineering.A new hang-off system installed on top of risers is proposed for improving the security of risers.This approach leads to a challenging problem:coupling the dynamics of risers with a new hang-off system combined with multiple structures and complex constraints.To accurately analyze the dynamic responses of the coupled system,a coupled dynamic model is established based on the Euler-Bernoulli beam-column theory and penalty function method.A comprehensive analysis method is proposed for coupled dynamic analysis by combining the finite element method and the Newmarkβmethod.An analysis program is also developed in MATLAB for dynamic simulation.The simulation results show that the dynamic performances of the risers at the top part are significantly improved by the new hang-off system,especially the novel design,which includes the centralizer and articulation joint.The bending moment and lateral deformation of the risers at the top part decrease,while the hang-off joint experiences a great bending moment at the bottom of the lateral restraint area which requires particular attention in design and application.The platform navigation speed range under the safety limits of risers expands with the new hang-off system in use.

Tensile Stiffness Analysis on Ocean Dynamic Power Umbilical

Tensile stiffness of ocean dynamic power umbilical is an important design parameter for functional implementation and structural safety. A column with radial stiffness which is wound by helical steel wires is constructed to predict the tensile stiffness value of umbilicals in the paper. The relationship between the tension and axial deformation is expressed analytically so the radial contraction of the column is achieved in the relationship by use of a simple finite element method. With an agreement between the theoretical prediction and the tension test results, the method is proved to be simple and efficient for the estimation of tensile stiffness of the ocean dynamic power umbilical.

Dynamic Simulation and Tension Compensation Research on Subsea Umbilical Cable Laying System

For studying the dynamic performance of subsea umbilical cable laying system and achieving the goal of cable tension and laying speed control,the rigid finite element method is used to discrete and transform the system into a rigid-flexible coupling multi-body system which consists of rigid elements and spring-damping elements.The mathematical model of subsea umbilical cable laying system kinematic chain is presented with the second order Lagrange equation in the joint coordinate system,and dynamic modeling and simulation is performed with ADAMS.The dynamic analysis is conducted assuming the following three statuses:ideal laying,practical laying under wave disturbance,and practical laying with tension compensation.Results show that motion disturbances of the laying budge under sea waves,especially with heaving and pitching,will cause relatively serious fluctuations in cable tension and laying speed.Tension compensation,i.e.,active back tension torque control can restrict continuous tension increasing or decreasing effectively and rapidly,thus avoiding cable breach or buckling.

Linear analysis of the dynamic response of a riser subject to internal solitary waves

The flow field induced by internal solitary waves(ISWs)is peculiar wherein water motion occurs in the whole water depth,and the strong shear near the pycnocline can be generated due to the opposite flow direction between the upper and lower layers,which is a potential threat to marine risers.In this paper,the flow field of ISWs is obtained with the Korteweg-de Vries(Kd V)equation for a two-layer fluid system.Then,a linear analysis is performed for the dynamic response of a riser with its two ends simply supported under the action of ISWs.The explicit expressions of the deflection and the moment of the riser are deduced based on the modal superposition method.The applicable conditions of the theoretical expressions are discussed.Through comparisons with the finite element simulations for nonlinear dynamic responses,it is proved that the theoretical expressions can roughly reveal the nonlinear dynamic response of risers under ISWs when the approximation for the linear analysis is relaxed to some extent.

Dynamic Analysis of A Deep-Water Compliant Vertical Access Riser with A Variable Length During Installation

Compliant vertical access risers(CVAR)have broad application prospects in deep-water oil and gas transportation.However,the mechanical behaviors of the CVAR with a variable length during installation remains unclear.To address this issue,based on the flexible segment method,a model of CVAR with a variable length during installation is established in this study,which is verified by the comparison with commercial software.Then,the mechanical behaviors of CVAR during installation are investigated.The results reveal that the CVAR configuration is significantly affected by the buoyancy blocks.The streamwise displacement of CVAR increases with the increase of current velocity.When the BOP weight is insuffcient,obvious upbending is observed in the lower region and transition region,leading to local compression.When the platform moves in the opposite direction to the current,the maximum stress is larger than that of the scenario when the platform moves in the same direction as the current.

Nonlinear Dynamic Analysis of Deepwater Drilling Risers Subjected to Random Loads

Excited by ocean currents, random wave and vessel motion, deepwater drilling risers exhibit significant dynamic response. In time domain, a method is proposed to calculate the nonlinear dynmnic response of deepwater drilling risers subjected to random wave and dynamic large displacement vessel motion boundary condition. Structural and functional loads, external and intemal pressure, free surfaee effect of irregular wave, hydrodynamic forees induced by current and wave, as well as wave and low frequency （drift） motion of the drilling vessel are all accounted for. An example is presented which illustrates the application of the proposed method. The study shows that long term drift motion of the vessel has profound effect on the envelopes of bending stress and lateral displacement, as well as the range of lower flex joint angle of the deepwater riser. It can also be concluded that vessel motion is the principal dynamic loading of nonlinear dynamic response for the deepwater risers rather than wave force.

A Flexible-Segment-Model-Based Dynamics Calculation Method for Free Hanging Marine Risers in Re-Entry

In re-entry, the drilling riser hanging to the holding vessel takes on a free hanging state, waiting to be moved from the initial random position to the wellhead. For the re-entry, dynamics calculation is often done to predict the riser motion or evaluate the structural safety. A dynamics calculation method based on Flexible Segment Model （FSM） is proposed for free hanging marine risers. In FSM, a riser is discretized into a series of flexible segments. For each flexible segment, its deflection feature and external forces are analyzed independently. For the whole riser, the nonlinear governing equations are listed according to the moment equilibrium at nodes. For the solution of the nonlinear equations, a linearization iteration scheme is provided in the paper. Owing to its flexibility, each segment can match a long part of the riser body, which enables that good results can be obtained even with a small number of segments. Moreover, the linearization iteration scheme can avoid widely used Newton-Rapson iteration scheme in which the calculation stability is influenced by the initial points. The FSM-based dynamics calculation is timesaving and stable, so suitable for the shape prediction or real-time control of free hanging marine risers.

Dynamic Response Study of Steel Catenary Riser Based on Slender Rod Model

A numerical model of the steel catenary riser(SCR) is built based on the slender rod model. The slender rod model,which describes the behavior of the slender riser in terms of the center line position, can solve the geometrical nonlinearity effectively. In a marine environment, the SCR is under the combined internal flow and external loads,such as wave and current. A general analysis considers only the inertial force and the drag force caused by the wave and current. However, the internal flow has an effect on the SCR; it is essential to explore the dynamic response of the SCR with the internal flow. The SCR also suffers the lift force and the fluctuating drag force because of the current. Finite element method is utilized to solve the motion equations. The effects of the internal flow, wave and current on the dynamic response of the SCR are considered. The results indicate that the increase of the internal flow density leads to the decrease of the displacement of the SCR, while the internal flow velocity has little effect on the SCR. The displacement of the SCR increases with the increase of the wave height and period. And the increasing wave period results in an increase in the vibration period of the SCR. The current velocity changes the displacements of the SCR in x-and z-directions. The vibration frequency of the SCR in y-direction increases with the increase of the current velocity.

Mechanical analysis of deepwater drilling riser system based on multibody system dynamics

A multibody system including a drilling riser system,tensioners and a floating platform is key equipment for offshore oil and gas drilling.Most of the previous studies only focus on the drilling riser system rather than the multibody system.Mechanical characteristics of the deepwater drilling riser system cannot be analyzed accurately in a simplified model.Therefore,a three-dimensional multibody analysis program is developed.The static and dynamic characteristics of the deepwater drilling riser system under different platform motions are analyzed based on the developed program.The results show that the static displacement of the riser system with tensioners is smaller than that without tensioners,which means the tensioners can suppress the deformation of the riser system.Under surge and sway motions of the platform,the dynamic displacement of the riser system with tensioners is also smaller than that without tensioners due to the tensioner suppression effect.Besides,the heave motion induces a uniform axial vibration of the riser system,while roll and pitch motions excite the riser system to vibrate laterally.Compared with the stress amplitude due to surge and sway motions,the stress amplitude of the riser system due to heave,roll and pitch motions is relatively small but cannot be neglected.

Dynamic Behaviors of A Marine Riser Under Two Different Frequency Parametric Excitations

The marine risers are often subjected to parametric excitations from the fluctuation top tension. The top tension on the riser may fluctuate with multiple frequencies caused by irregular waves. In this paper, the influence between different frequency components in the top tension on the riser system is theoretically simulated and analyzed. With the Euler-Bernoulli beam theory, a dynamic model for the vibrations of the riser is established. The top tension is set as fluctuating with time and it has two different frequencies. The influences from the fluctuation amplitudes, circular frequencies and phase angles of these frequency components on the riser system are analyzed in detail. When these two frequencies are fluctuating in the stable regions, the riser system may become unstable because ω1+ω2≈2Ωn. The fluctuation amplitudes of these frequencies have little effect on the components of the vibration frequencies of the riser. For different phase angles, the stability and dynamic behaviors of the riser would be different.

Nonlinear Dynamic Analysis of Flexible Marine-Risers

A nonlinear dynamic analysis model is estabilished on the basis of 'lumped mass' approach, which takes the influence of the fluid flow within the pipe into consideration. Numerical results are compared with the published works, and the effects of internal fluid flow, internal pressure, dyanmics as well as the nonlinear characteristics on the behavior of flexible risers are discussed. From this work, some useful conclusions are drawn.

Dynamic Response of a Riser Under Excitation of Internal Waves

In this paper, the dynamic response of a marine riser under excitation of internal waves is studied. With the linear approximation, the governing equation of internal waves is given. Based on the rigid-lid boundary condition assumption, the equation is solved by Thompson-Haskell method. Thus the velocity field of internal waves is obtained by the continuity equation. Combined with the modified Morison formula, using finite element method, the motion equation of riser is solved in time domain with Newmark-β method. The computation programs are compiled to solve the differential equations in time domain. Then we get the numerical results, including riser displacement and transfiguration. It is observed that the internal wave will result in circular shear flow, and the first two modes have a dominant effect on dynamic response of the marine riser. In the high mode, the response diminishes rapidly. In different modes of internal waves, the deformation of riser has different shapes, and the location of maximum displacement shifts. Studies on wave parameters indicate that the wave amplitude plays a considerable role in response displacement of riser, while the wave frequency contributes little. Nevertheless, the internal waves of high wave frequency will lead to a high-frequency oscillation of riser; it possibly gives rise to fatigue crack extension and partial fatigue failure.

Dynamics of risers for earthquake resistant designs

It is well known that no criterion about seismic design for risers is available, and relevant research has not been reported. A comprehensive study of riser dynamics during earthquakes is performed in this paper. A dynamic model for seismic analysis of risers is developed in accordance with the working environment of the risers and the influence of inertia force of the pipelines. The dynamic equations for the developed model are derived and resolved on the basis of the energy theory of beams. Numerical simulation for an engineering project in the Bohai Oil Field, China shows that the fundamental frequency of the riser plays the major role in the seismic responses, and for platforms in shallow water in Bohai Bay, the risers demonstrate a much lower stress response due to prominent differences between the riser frequency and the earthquake wave frequency. The presented model and its corresponding method for seismic analysis are practical and important for riser design resistant to earthquake waves.

A Geometrically Exact Formulation for Three-Dimensional Numerical Simulation of the Umbilical Cable in A Deep-Sea ROV System

This paper proposes a geometrically exact formulation for three-dimensional static and dynamic analyses of the umbilical cable in a deep-sea remotely operated vehicle（ROV） system. The presented formulation takes account of the geometric nonlinearities of large displacement, effects of axial load and bending stiffness for modeling of slack cables. The resulting nonlinear second-order governing equations are discretized spatially by the finite element method and solved temporally by the generalized-a implicit time integration algorithm, which is adapted to the case of varying coefficient matrices. The ability to consider three-dimensional union action of ocean current and ship heave motion upon the umbilical cable is the key feature of this analysis. The presented formulation is firstly validated, and then three numerical examples for the umbilical cable in a deep-sea ROV system are demonstrated and discussed, including the steady configurations only under the action of depth-dependent ocean current, the dynamic responses in the case of the only ship heave motion, and in the case of the combined action of the ship heave motion and ocean current.

Nonlinear Dynamic Analysis and Fatigue Study of Steep Wave Risers Under Irregular Loads

As a reliable alternative option for traditional steel catenary risers(SCRs),steep wave risers(SWRs)have been widely applied to deepwater oil and gas production.However,the nonlinear dynamic analysis of SWRs is more complicated than that of traditional SCRs due to their special configuration and significant geometric nonlinearity.Moreover,SWRs are highly susceptible to fatigue failure under the combined excitation of irregular waves and top floater motions(TFMs).In this study,considering irregular waves and TFMs,a numerical SWR model with an internal flow is constructed based on the slender rod model and finite element method.The Newmark-βmethod is adopted to solve the dynamic behavior of SWR.Moreover,the Palmgren-Miner rule,a specified S-N curve,and rainflow counting method are applied to estimate the fatigue damage.An efficient numerical computation procedure,i.e.,DRSWR,is programmed with MATLAB in this study.Calculation results are compared with those of OrcaFlex to verify the accuracy of the DRSWR.The nonlinear dynamic response and fatigue damage of an SWR under the combined excitation of irregular waves and TFMs are obtained,and a comprehensive parametric analysis is then conducted.The analysis results show that the buoyancy section undergoes the highest level of stress and fatigue damage under the combined excitation of irregular waves and TFMs.An internal flow with high velocity and high density produces a high level of fatigue damage.The buoyancy factor and length of the buoyancy section should be set moderately to reconcile the reduction of the top tension with increased fatigue life.These results are expected to provide some reference significance for the engineering design of SWR.

Stress Analysis of the Subsea Dynamic Riser BaseProcess Piping

Thesubsea dynamic riser base （SDRB） is an important piece of equipment for the floating production platform mooring system.One end is connected to the rigid pipeline, carrying a rigid pipeline thermal expansion load and the other end is connected to a flexible riser, carrying the dynamic load of the flexible riser, so its function is a transition connection between the flexible riser and the rigid pipeline which fixes the flexible riser on the seabed. On the other hand. as a typical subsea product, the design will satisfythe requirements of the standards for subsea products. By studying the stress analysisphilosophy of the topside piping and subsea pipeline, a physical model and procedure for piping stress analysis of the SDRB have been established.The conditions of the adverse design load have been considered, and a combination of the static load from the rigid pipeline and the dynamic load flexibility has also been optimized. And a comparative analysis between the AMSE, DNV and API standards for piping stress with the checking rules has been done.Because theSDRB belongs to the subsea pipeline terminal product, the use of DNV standards to check its process piping stress is recommended. Finally, the process piping stress of the SDRB has been calculated, and the results show that the jacket pipe and the carrier pipe stress of the SDRB process piping satisfy the DNV standards as a whole.The bulkhead cannot be accurately simulated by the AutoPIPE software which uses the FEA software ANSYS inthe detailed analysis, but the checking results will still meet the requirements of the DNV standards.

Depicting the role of gas–solid interactions on the hydrodynamics of converging pneumatic riser

The understanding of the flow characteristics and effect of gas–solid interactions in pneumatic risers is fundamental to investigate to ensure effective design cost-effective operation.Thus,to understand the effect of gas–solid interactions on the hydrodynamics of newly proposed conversing risers,this study mainly focused on predicting pressure drop in the dilute phase pneumatic conveying system.The experiments were conducted in a converging riser having a convergence angle of 0.2693°.Various solid particles such as sago,black mustard,and alumina have been considered to study the effect of particle sizes and density on the pressure drop.The experimental outcomes indicate that the total pressure drop increases with an increase in the solid density and gas mass flow rate.Moreover,smaller particle sizes are also increased the pressure drop.An empirical correlation is developed for the prediction of total pressure dropΔPTin converging pneumatic riser via dimensional analysis.All dependent variables such as particle and air density,drag force,acceleration due to gravity,the mass flow rate of air and particle,the diameter of particle and converging riser,the height of converging riser were considered to develop the empirical correlation.The established relationship is tested,and experimental data have been fitted for its validation.The estimated relative error of less than 0.05 proved the significance of the developed correlation.Hence,it can be stated that the established relationship is useful in studying the effects of various parameters on the pressure drop across the length of the conversing riser.

修井船运动激励下修井隔水管-修井工具系统动力学特性

考虑修井工具的影响,开展修井船运动激励下修井隔水管系统动力学特性研究。基于梁理论建立了修井隔水管与修井工具的力学模型,施加了修井船运动、张紧系统及土壤等边界约束;使用间隙单元法建立了修井隔水管与修井工具的接触模型;基于有限元法与Newmark-β法建立了数值模型,对修井船不同运动下的修井隔水管系统动态响应进行了分析。结果表明:当修井船升沉运动时,修井隔水管轴向位移与修井工具轴向位移差异显著;当修井船纵荡时,修井隔水管与修井工具易发生规律性接触;当修井船纵摇运动时,修井隔水管与修井工具运动几乎一致。

海洋复合管缆设计关键技术与挑战

海洋复合管缆是海洋资源开发的重要装备之一,广泛应用于海上油气开发、深海采矿、海上风电等。海洋复合管缆具有弯曲性能好、质量轻、强度高、耐腐蚀和耐高低温等优点,能满足海洋资源开发不断向深水进发的需求。然而,海洋复合管缆相较于传统均质管道结构设计更加复杂,力学特性和使用寿命的准确预测更加困难。结合相关规范对海洋复合管缆设计的常规方法进行介绍,并归纳总结海洋复合管缆设计中需要进一步考虑的结构优化技术、材料非线性问题、几何非线性问题和界面非线性问题(界面强度、界面疲劳、界面摩擦)等关键技术。研究结果可为海洋复合管缆的设计研究提供指导。

深水隔水管-防喷器组耦合系统动力学建模与仿真验证

在深水钻井过程中,隔水管与防喷器组系统是整个作业环节的重要一环。由于在作业过程中面临着诸多风险,因此,建立精确的隔水管-防喷器组耦合系统力学分析模型,准确分析其力学行为和性能,对指导钻井作业安全进行具有重要意义。目前大多只关注于对隔水管的独立建模而忽视防喷器组的潜在影响,这将导致所建模型与实际情况存在差异,使得隔水管系统的力学特性无法得到精确分析。提出了隔水管与防喷器组刚柔耦合概念,推导耦合系统动能、势能,采用拉格朗日方法建立理论模型,用Newmark-β直接积分法对动力学模型进行数值计算。采用ADAMS软件进行了仿真建模,开展不同工况条件下的动态响应对比分析。结果表明,理论模型得到的隔水管横向位移包络线、弯矩包络线、隔水管中部节点横向位移时程曲线和底部弯矩时程曲线与ADAMS仿真结果吻合良好,从而表明了该理论模型的重要性,可为我国隔水管的设计和分析提供参考和支持。