Analysis of CH_(4) and H_(2) Adsorption on Heterogeneous Shale Surfaces Using aMolecular Dynamics Approach

Determining the adsorption of shale gas on complex surfaces remains a challenge in molecular simulation studies.Difficulties essentially stem from the need to create a realistic shale structure model in terms of mineral heterogeneityand multiplicity.Moreover,precise characterization of the competitive adsorption of hydrogen andmethane in shale generally requires the experimental determination of the related adsorptive capacity.In thisstudy,the adsorption of adsorbates,methane(CH_(4)),and hydrogen(H_(2))on heterogeneous shale surface modelsof Kaolinite,Orthoclase,Muscovite,Mica,C_(60),and Butane has been simulated in the frame of a moleculardynamic’s numerical technique.The results show that these behaviors are influenced by pressure and potentialenergy.On increasing the pressure from 500 to 2000 psi,the sorption effect for CH_(4)significantly increasesbut shows a decline at a certain stage(if compared to H_(2)).The research findings also indicate that raw shalehas a higher capacity to adsorb CH_(4)compared to hydrogen.However,in shale,this difference is negligible.

Morphological analysis for thermodynamics of cavitation collapse near fractal solid wall

A fractal geometric boundary with natural wall features is introduced into a hybrid lattice-Boltzmann-method(LBM)multiphase model. The physical model of cavitation bubble collapse near the irregular geometric wall is established to study the thermodynamic characteristics of the bubble collapse. Due to the lack of periodicity, symmetry, spatial uniformity and obvious correlation in the LBM simulation of the bubble collapse near the fractal wall, the morphological analysis based on Minkowski functional is introduced into the thermodynamic investigation of cavitation bubble so as to analyze and obtain the effective information. The results show that the Minkowski functional method can employed to study the temperature information in complex physical fields hierarchically and quantitatively. The high/low temperature region of the cavitation flow is explored, and thermal effect between irregular and fractal geometric wall and cavitation bubble can be revealed. It illustrates that LBM and morphological analysis complement each other, and morphological analysis can also be used as an optional and potential tool in research field of complex multiphase flows.

Correction:Nonlinear dynamics in Divisia monetary aggregates:an application of recurrence quantification analysis

Following publication of the original article(Andreadis et al.2023),the authors reported that they mistakenly omitted the affiliations 1,2 and 3 for Ioannis Andreadis,Athanasios D.Fragkou and Theodoros E.Karakasidis.The correct affiliations for each author should read.

Stochastic Analysis for the Dynamics of a Poliovirus Epidemic Model

Most developing countries such as Afghanistan,Pakistan,India,Bangladesh,and many more are still fighting against poliovirus.According to the World Health Organization,approximately eighteen million people have been infected with poliovirus in the last two decades.In Asia,still,some countries are suffering from the virus.The stochastic behavior of the poliovirus through the transition probabilities and non-parametric perturbation with fundamental properties are studied.Some basic properties of the deterministic model are studied,equilibria,local stability around the stead states,and reproduction number.Euler Maruyama,stochastic Euler,and stochastic Runge-Kutta study the behavior of complex stochastic differential equations.The main target of this study is to develop a nonstandard computational method that restores dynamical features like positivity,boundedness,and dynamical consistency.Unfortunately,the existing methods failed to fix the actual behavior of the disease.The comparison of the proposed approach with existing methods is investigated.

Analysis and Simulations of Open-Source Intelligence Process System Dynamics from User’s Perspective

In today’s society with advanced Internet,the amount of information increases dramatically with each passing day,which leads to increasingly complex processes of open-source intelligence.Therefore,it is more important to rationalize the operation mode and improve the operation efficiency of open-source intelligence under the premise of satisfying users’needs.This paper focuses on the simulation study of the process system of opensource intelligence from the user’s perspective.First,the basic concept and development status of open-source intelligence are introduced in details.Second,six existing intelligence operation process models are summarized and their advantages and disadvantages are compared in focus.Based on users’preference,the open-source intelligence system simulation theory model is constructed from four aspects:intelligence collection,intelligence processing,intelligence analysis,and intelligence delivery.Meanwhile,the dynamics model of the open-source intelligence process system is constructed based on the open-source intelligence system simulation theoretical model,which specifically includes five parts:determination of system boundary,construction of causal loop diagram,construction of stock flow diagram,writing ofmathematical equations,and system sensitivity test.Finally,the system simulation results were analyzed.It was found that improving the system of intelligence agencies,opening up government affairs,improving the professional level of intelligence personnel,strengthening the communication and cooperation among personnel of various intelligence departments,and expressing intelligence products through diverse forms can effectively improve the operational efficiency of the open-source intelligence process system.

Nonlinear coupling modeling and dynamics analysis of rotating flexible beams with stretching deformation effect

Dynamic coupling modeling and analysis of rotating beams based on the nonlinear Green-Lagrangian strain are introduced in this work.With the reservation of the axial nonlinear strain,there are more coupling terms for axial and transverse deformations.The discretized dynamic governing equations are obtained by using the finite element method and Lagrange’s equations of the second kind.Time responses are conducted to compare the proposed model with other previous models.The stretching deformation due to rotating motion is observed and calculated by special formulations under dynamic equilibrium.The stretching deformation and the change of the associated equilibrium position are taken into account to analyze the free vibration and frequency response of the rotating beams.Analytical and numerical comparisons show that the proposed model can provide reliable results,while the previous models may lead to imprecise results,especially in high-speed conditions.

Comparison Study and Forensic Analysis between Experiment and Coupled Dynamics Simulation for Submerged Floating Tunnel Segment with Free Ends under Wave Excitations

This paper presents dynamic-behavior comparisons and related forensic analyses of a submerged floating tunnel(SFT)between numerical simulation and physical experiment under regular and irregular waves.The experiments are conducted in the 3Dwave tank with 1:33.3 scale,and the corresponding coupled time-domain simulation tool is devised for comparison.The entire SFT systemconsists of a long concrete tunnel and 12 tubular aluminummooring lines.Two numerical simulation models,the Cummins equation with 3D potential theory including second-order wave-body interaction effects and the much simpler Morison-equation-based formula with the lumped-massbased line model,are designed and compared.Forensic analyses for mooring-line adjustments in the simulation are carried out in view of the best representation of the physical system.After that,the measured pre-tension distribution and systemstiffness of twelvemooring lines arewell reproduced in the numericalmodel.Subsequently,the dynamic responses and mooring tensions of the SFT are compared under regular and irregular waves.The measured and simulated results coincide reasonably well for both regular-and irregular-wave conditions.

The impact of demographic dynamics on food consumption and its environmental outcomes:Evidence from China

With increasing population and changing demographics,food consumption has experienced a significant transition in quantity and quality.However,a dearth of knowledge remains regarding its environmental impacts and how it responds to demographic dynamics,particularly in emerging economies like China.Using the two-stage Quadratic Almost Demand System(QUAIDS)model,this study empirically examines the impact of demographic dynamics on food consumption and its environmental outcomes based on the provincial data from 2000 to 2020 in China.Under various scenarios,according to changes in demographics,we extend our analysis to project the long-term trend of food consumption and its environmental impacts,including greenhouse gas(GHG)emissions,water footprint(WF),and land appropriation(LA).The results reveal that an increase in the proportion of senior people significantly decreases the consumption of grain and livestock meat and increases the consumption of poultry,egg,and aquatic products,particularly for urban residents.Moreover,an increase in the proportion of males in the population leads to higher consumption of poultry and aquatic products.Correspondingly,in the current scenario of an increased aging population and sex ratio,it is anticipated that GHG emissions,WF,and LA are likely to decrease by 1.37,2.52,and 3.56%,respectively.More importantly,in the scenario adhering to the standards of nutritional intake according to the Dietary Guidelines for Chinese Residents in 2022,GHG emissions,WF,and LA in urban areas would increase by 12.78,20.94,and 18.32%,respectively.Our findings suggest that changing demographics should be considered when designing policies to mitigate the diet-environment-health trilemma and achieve sustainable food consumption.

Analysis and prediction of global vegetation dynamics:past variations and future perspectives

Spatiotemporal dynamic vegetation changes affect global climate change,energy balances and the hydrological cycle.Predicting these dynamics over a long time series is important for the study and analysis of global environmental change.Based on leaf area index(LAI),climate,and radiation flux data of past and future scenarios,this study looked at historical dynamic changes in global vegetation LAI,and proposed a coupled multiple linear regression and improved gray model(CMLRIGM)to predict future global LAI.The results show that CMLRIGM predictions are more accurate than results predicted by the multiple linear regression(MLR)model or the improved gray model(IGM)alone.This coupled model can effectively resolve the problem posed by the underestimation of annual average of global vegetation LAI predicted by MLR and the overestimate predicted by IGM.From 1981 to 2018,the annual average of LAI in most areas covered by global vegetation(71.4%)showed an increase with a growth rate of 0.0028 a-1;of this area,significant increases occurred in 34.42%of the total area.From 2016 to 2060,the CMLRIGM model has predicted that the annual average global vegetation LAI will increase,accounting for approximately 68.5%of the global vegetation coverage,with a growth rate of 0.004 a-1.The growth rate will increase in the future scenario,and it may be related to the driving factors of the high emission scenario used in this study.This research may provide a basis for simulating spatiotemporal dynamic changes in global vegetation conditions over a long time series.

Numerical Analysis for the Effect of Irresponsible Immigrants on HIV/AIDS Dynamics

The human immunodeficiency viruses are two species of Lentivirus that infect humans.Over time,they cause acquired immunodeficiency syndrome,a condition in which progressive immune system failure allows life-threatening opportunistic infections and cancers to thrive.Human immunodeficiency virus infection came from a type of chimpanzee in Central Africa.Studies show that immunodeficiency viruses may have jumped from chimpanzees to humans as far back as the late 1800s.Over decades,human immunodeficiency viruses slowly spread across Africa and later into other parts of the world.The Susceptible-Infected-Recovered(SIR)models are significant in studying disease dynamics.In this paper,we have studied the effect of irresponsible immigrants on HIV/AIDS dynamics by formulating and considering different methods.Euler,Runge Kutta,and a Non-standardfinite difference(NSFD)method are developed for the same problem.Numerical experiments are performed at disease-free and endemic equilibria points at different time step sizes‘ℎ’.The results reveal that,unlike Euler and Runge Kutta,which fail for large time step sizes,the proposed Non-standardfinite difference(NSFD)method gives a convergence solution for any time step size.Our proposed numerical method is bounded,dynamically con-sistent,and preserves the positivity of the continuous solution,which are essential requirements when modeling a prevalent disease.

Lagrangian coherent structure analysis on transport of Acetes chinensis along coast of Lianyungang,China

Spatial heterogeneity or“patchiness”of plankton distributions in the ocean has always been an attractive and challenging scientific issue to oceanographers.We focused on the accumulation and dynamic mechanism of the Acetes chinensis in the Lianyungang nearshore licensed fishing area.The Lagrangian frame approaches including the Lagrangian coherent structures theory,Lagrangian residual current,and Lagrangian particle-tracking model were applied to find the transport pathways and aggregation characteristics of Acetes chinensis.There exist some material transport pathways for Acetes chinensis passing through the licensed fishing area,and Acetes chinensis is easy to accumulate in the licensed fishing area.The main mechanism forming this distribution pattern is the local circulation induced by the nonlinear interaction of topography and tidal flow.Both the Lagrangian coherent structure analysis and the particle trajectory tracking indicate that Acetes chinensis in the licensed fishing area come from the nearshore estuary.This work contributed to the adjustment of licensed fishing area and the efficient utilization of fishery resources.

Dynamic decision and its complex dynamics analysis of low-carbon supply chain considering risk-aversion under carbon tax policy

This study establishes a low-carbon supply chain game model under the centralized decision situation and the decentralized decision situation considering the manufacturer risk-aversion behavior, and discusses the influence of the manufacturer risk-aversion behavior on the optimal decision, profit, coordination, and complex dynamics of the supply chain. We find that comparing with the risk-neutral decentralized decision, the increase of manufacturer's risk tolerance attitude can narrow the gap between the supply chain profit and the centralized decision, but it will further reduce the carbon emission reduction level. The increase of risk tolerance of the manufacturer and carbon tax will narrow the stable region of the system. Under this situation, the manufacturer should carefully adjust parameters to prevent the system from losing stability,especially the adjustment parameters for carbon emission reduction level. When the system is in a chaotic state, the increase of carbon tax rate makes the system show more complex dynamic characteristics. Under the chaotic state, it is difficult for the manufacturer to make correct price decision and carbon emission reduction strategy for the next period, which damages its profit, but increases the profit of the retailer and the supply chain. Finally, the carbon emission reduction cost-sharing contract is proposed to improve the carbon emission reduction level and the supply chain efficiency, achieving Pareto improvement. The stability region of the system is larger than that in the centralized decision situation, but the increase of the cost sharing coefficient will reduce the stability of the system in the decentralized decision-making situation.

A New Dynamics Analysis Model for Five-Axis Machining of Curved Surface Based on Dimension Reduction and Mapping

The equipment used in various fields contains an increasing number of parts with curved surfaces of increasing size.Five-axis computer numerical control(CNC)milling is the main parts machining method,while dynamics analysis has always been a research hotspot.The cutting conditions determined by the cutter axis,tool path,and workpiece geometry are complex and changeable,which has made dynamics research a major challenge.For this reason,this paper introduces the innovative idea of applying dimension reduction and mapping to the five-axis machining of curved surfaces,and proposes an efficient dynamics analysis model.To simplify the research object,the cutter position points along the tool path were discretized into inclined plane five-axis machining.The cutter dip angle and feed deflection angle were used to define the spatial position relationship in five-axis machining.These were then taken as the new base variables to construct an abstract two-dimensional space and establish the mapping relationship between the cutter position point and space point sets to further simplify the dimensions of the research object.Based on the in-cut cutting edge solved by the space limitation method,the dynamics of the inclined plane five-axis machining unit were studied,and the results were uniformly stored in the abstract space to produce a database.Finally,the prediction of the milling force and vibration state along the tool path became a data extraction process that significantly improved efficiency.Two experiments were also conducted which proved the accuracy and efficiency of the proposed dynamics analysis model.This study has great potential for the online synchronization of intelligent machining of large surfaces.

Block Incremental Dense Tucker Decomposition with Application to Spatial and Temporal Analysis of Air Quality Data

How can we efficiently store and mine dynamically generated dense tensors for modeling the behavior of multidimensional dynamic data?Much of the multidimensional dynamic data in the real world is generated in the form of time-growing tensors.For example,air quality tensor data consists of multiple sensory values gathered from wide locations for a long time.Such data,accumulated over time,is redundant and consumes a lot ofmemory in its raw form.We need a way to efficiently store dynamically generated tensor data that increase over time and to model their behavior on demand between arbitrary time blocks.To this end,we propose a Block IncrementalDense Tucker Decomposition(BID-Tucker)method for efficient storage and on-demand modeling ofmultidimensional spatiotemporal data.Assuming that tensors come in unit blocks where only the time domain changes,our proposed BID-Tucker first slices the blocks into matrices and decomposes them via singular value decomposition(SVD).The SVDs of the time×space sliced matrices are stored instead of the raw tensor blocks to save space.When modeling from data is required at particular time blocks,the SVDs of corresponding time blocks are retrieved and incremented to be used for Tucker decomposition.The factor matrices and core tensor of the decomposed results can then be used for further data analysis.We compared our proposed BID-Tucker with D-Tucker,which our method extends,and vanilla Tucker decomposition.We show that our BID-Tucker is faster than both D-Tucker and vanilla Tucker decomposition and uses less memory for storage with a comparable reconstruction error.We applied our proposed BID-Tucker to model the spatial and temporal trends of air quality data collected in South Korea from 2018 to 2022.We were able to model the spatial and temporal air quality trends.We were also able to verify unusual events,such as chronic ozone alerts and large fire events.

Model reduction of fractional impedance spectra for time–frequency analysis of batteries, fuel cells, and supercapacitors

Joint time–frequency analysis is an emerging method for interpreting the underlying physics in fuel cells,batteries,and supercapacitors.To increase the reliability of time–frequency analysis,a theoretical correlation between frequency-domain stationary analysis and time-domain transient analysis is urgently required.The present work formularizes a thorough model reduction of fractional impedance spectra for electrochemical energy devices involving not only the model reduction from fractional-order models to integer-order models and from high-to low-order RC circuits but also insight into the evolution of the characteristic time constants during the whole reduction process.The following work has been carried out:(i)the model-reduction theory is addressed for typical Warburg elements and RC circuits based on the continued fraction expansion theory and the response error minimization technique,respectively;(ii)the order effect on the model reduction of typical Warburg elements is quantitatively evaluated by time–frequency analysis;(iii)the results of time–frequency analysis are confirmed to be useful to determine the reduction order in terms of the kinetic information needed to be captured;and(iv)the results of time–frequency analysis are validated for the model reduction of fractional impedance spectra for lithium-ion batteries,supercapacitors,and solid oxide fuel cells.In turn,the numerical validation has demonstrated the powerful function of the joint time–frequency analysis.The thorough model reduction of fractional impedance spectra addressed in the present work not only clarifies the relationship between time-domain transient analysis and frequency-domain stationary analysis but also enhances the reliability of the joint time–frequency analysis for electrochemical energy devices.

Nonlinear dynamics in Divisia monetary aggregates:an application of recurrence quantification analysis

We construct recurrence plots(RPs)and conduct recurrence quantification analysis(RQA)to investigate the dynamic properties of the new Center for Financial Stability(CFS)Divisia monetary aggregates for the United States.In this study,we use the lat-est vintage of Divisia aggregates,maintained within CFS.We use monthly data,from January 1967 to December 2020,which is a sample period that includes the extreme economic events of the 2007–2009 global financial crisis.We then make comparisons between narrow and broad Divisia money measures and find evidence of a nonlinear but reserved possible chaotic explanation of their origin.The application of RPs to broad Divisia monetary aggregates encompasses an additional drift structure around the global financial crisis in 2008.Applying the moving window RQA to the growth rates of narrow and broad Divisia monetary aggregates,we identify periods of changes in data-generating processes and associate such changes to monetary policy regimes and financial innovations that occurred during those times.

Dynamic Analysis of A Deepwater Drilling Riser with A New Hang-off System

The safety of risers in hang-off states is a vital challenge in offshore oil and gas engineering.A new hang-off system installed on top of risers is proposed for improving the security of risers.This approach leads to a challenging problem:coupling the dynamics of risers with a new hang-off system combined with multiple structures and complex constraints.To accurately analyze the dynamic responses of the coupled system,a coupled dynamic model is established based on the Euler-Bernoulli beam-column theory and penalty function method.A comprehensive analysis method is proposed for coupled dynamic analysis by combining the finite element method and the Newmarkβmethod.An analysis program is also developed in MATLAB for dynamic simulation.The simulation results show that the dynamic performances of the risers at the top part are significantly improved by the new hang-off system,especially the novel design,which includes the centralizer and articulation joint.The bending moment and lateral deformation of the risers at the top part decrease,while the hang-off joint experiences a great bending moment at the bottom of the lateral restraint area which requires particular attention in design and application.The platform navigation speed range under the safety limits of risers expands with the new hang-off system in use.

Evaluation of slope stability through rock mass classification and kinematic analysis of some major slopes along NH-1A from Ramban to Banihal, North Western Himalayas

The network of Himalayan roadways and highways connects some remote regions of valleys or hill slopes,which is vital for India’s socio-economic growth.Due to natural and artificial factors,frequency of slope instabilities along the networks has been increasing over last few decades.Assessment of stability of natural and artificial slopes due to construction of these connecting road networks is significant in safely executing these roads throughout the year.Several rock mass classification methods are generally used to assess the strength and deformability of rock mass.This study assesses slope stability along the NH-1A of Ramban district of North Western Himalayas.Various structurally and non-structurally controlled rock mass classification systems have been applied to assess the stability conditions of 14 slopes.For evaluating the stability of these slopes,kinematic analysis was performed along with geological strength index(GSI),rock mass rating(RMR),continuous slope mass rating(CoSMR),slope mass rating(SMR),and Q-slope in the present study.The SMR gives three slopes as completely unstable while CoSMR suggests four slopes as completely unstable.The stability of all slopes was also analyzed using a design chart under dynamic and static conditions by slope stability rating(SSR)for the factor of safety(FoS)of 1.2 and 1 respectively.Q-slope with probability of failure(PoF)1%gives two slopes as stable slopes.Stable slope angle has been determined based on the Q-slope safe angle equation and SSR design chart based on the FoS.The value ranges given by different empirical classifications were RMR(37-74),GSI(27.3-58.5),SMR(11-59),and CoSMR(3.39-74.56).Good relationship was found among RMR&SSR and RMR&GSI with correlation coefficient(R 2)value of 0.815 and 0.6866,respectively.Lastly,a comparative stability of all these slopes based on the above classification has been performed to identify the most critical slope along this road.

A Review of Recent Trends in Quantum Thermodynamics and a System’s Behavioural Analysis of the Universe Originating as a Quantum Energy System

This paper combines a review of recent advances in quantum thermodynamics, including work on objective collapse (Zurek’s quantum Darwinism) and quantum gravity (Verlinde’s quantum gravity explanation), with a redefinition of entropy generation as systems’ change process. These concepts are used as systems’ behaviour analysis tools to allow us to revisit Hartle and Hawking’s 1983 quantum universe and develop a hypothesis for how physically a universe starting in a quantum state could evolve into our current universe, based on systems analysis. The outcome of this analysis raises a question: do we already have the elements of a “theory of everything” hiding in plain sight within recent advances in quantum thermodynamics?

Research on the Stability Analysis Method of DC Microgrid Based on Bifurcation and Strobe Theory

During the operation of a DC microgrid,the nonlinearity and low damping characteristics of the DC bus make it prone to oscillatory instability.In this paper,we first establish a discrete nonlinear system dynamic model of a DC microgrid,study the effects of the converter sag coefficient,input voltage,and load resistance on the microgrid stability,and reveal the oscillation mechanism of a DC microgrid caused by a single source.Then,a DC microgrid stability analysis method based on the combination of bifurcation and strobe is used to analyze how the aforementioned parameters influence the oscillation characteristics of the system.Finally,the stability region of the system is obtained by the Jacobi matrix eigenvalue method.Grid simulation verifies the feasibility and effectiveness of the proposed method.