Major Technologies for Safe Construction of High Earth-Rockfill Dams

The earth-rockfill dam is one of the primary dam types in the selection of high dams to be constructed in Western China, since it is characterized by favorable adaptability of the dam foundation; full utilization of local earth, rock, and building-excavated materials; low construction cost; and low cement consumption. Many major technical issues regarding earth-rockfill dams with a height of over 250 m were studied and solved successfully in the construction of the 261.5 m Nuozhadu earth core rockfill dam. This paper describes research achievements and basic conclusions; systematically summarizes the accumulated experiences from the construction of the Nuozhadu Dam and other high earth-rockfill dams; and discusses major technical issues, such as deformation control, seepage control, dam slope stability, safety and control of flood discharging, safety and quality control of dam construction, safety assessments, early warning, and other key technical difficulties. This study also provides a reference and technological support for the future construction of 300 m high earth-rockfill dams.

Nonlinear finite element analysis of effect of seismic waves on dynamic response of Shiziping dam

Many high earth-rockfill dams are constructed in the west of China. The seismic intensity at the dam site is usually very high, thus it is of great importance to ensure the safety of the dam in meizoseismal area. A 3D FEM model is established to analyze the seismic responses of Shiziping earth-rockfill dam. The nonlinear elastic Duncan-Chang constitutive model and the equivalent viscoelastic constitutive model are used to simulate the static and dynamic stress strain relationships of the dam materials, respectively. Four groups of seismic waves are inputted from the top of the bedrock to analyze the dynamic responses of the dam. The numerical results show that the calculated dynamic magnification factors display a good consistency with the specification values. The site spectrum results in larger acceleration response than the specification spectrum. The analysis of relative dynamic displacement indicates that the displacement at the downstream side of the dam is larger than that at the upstream side. The displacement response reduces from the center of river valley to two banks. The displacement responses corresponding to the specification spectrum are a little smaller than those corresponding to the site spectrum. The analysis of shear stress indicates that a large shear stress area appears in the upstream overburden layer, where the shear stress caused by site waves is larger than that caused by specification waves. The analysis of dynamic principal stress indicates that the minimum dynamic stresses in corridor caused by specification and site waves have little difference. The maximum and minimum dynamic stresses are relatively large at two sides. The largest tensile stress occurs at two sides of the floor of grouting corridor, which may result in the crack near the corridor side. The numerical results present good consistency with the observation data of the grouting corridor in Wenchuan earthquake.

Chebyshev Spectral Element Analysis for Pore-Pressure of ERDs during Construction Period

Chebyshev spectral elements are applied to dissipation analysis of pore-pressure of roller compaction earth-rockfilled dams (ERD) during their construction. Nevertheless, the conventional finite element, for its excellent adaptability to complex geometrical configuration, is the most common way of spatial discretization for the pore-pressure solution of ERDs now [1]. The spectral element method, by means of the spectral isoparametric transformation, surmounts the disadvantages of disposing with complex geometry. According to the illustration of numerical examples, one can conclude that the spectral element methods have the following obvious advantages: 1) large spectral elements can be used in spectral element methods for the domains of homogeneous material;2) in the application of large spectral elements to spatial discretization, only a few leading terms of Chebyshev interpolation polynomial are taken to arrive at the solutions of better accuracy;3) spectral element methods have excellent convergence as well-known. Spectral method also is used to integrate the evolution equation in time to avoid the limitation of conditional stability of time-history