By using the D-InSAR technique, we have acquired the temporal-spatial evolution images of preseismic.cosesimci-postseismic interferometric deformation fields associated with the M 7.9 earthquake of Mani, Tibet on 8 No...By using the D-InSAR technique, we have acquired the temporal-spatial evolution images of preseismic.cosesimci-postseismic interferometric deformation fields associated with the M 7.9 earthquake of Mani, Tibet on 8 November 1997. The analysis of these images reveals the relationships between the temporal-spatial evolution features of the interferometric deformation fields and locking, rupturing, and elastic restoring of the source rupture plane, which represent the processes of strain accumulation, strain release, and postseismic restoration. The result shows that 10 months prior to the Mani event, a left-lateral shear trend appeared in the seismic area, which was in accordance with the earthquake fault in nature. The quantity of local deformation on the north wall was slightly larger than that on the south wall, and the deformation distribution area of the north wall was relatively large. With the event impending, the deformation of the south wall varied increasingly, and the deformation center shifted eastward. Two and half monthd before the event, the west side of the fault was still locked while the east side began to slide, implying that the whole fault would rupture at any moment. These features can be regarded as short-term precursors to this earthquake. Within the period from 16 April 1996 to two and half months before the earthquake, the most remarkable deformation zones appeared in the north and south walls, which were parallel to and about 40 km apart from the fault, with accumulated local displacements of 344 mm and 251 mm on the north and south walls, respectively. The south wall was the active one with larger displacements. Five months after the earthquake, the distribution feature of interferometric fringes was just opposite to that prior to the event, expressing evident right-lateral shear. The recovered displacements are -179 mm on the north wall and -79 mm on the south wall, close to the east side of the fault. However, in the area of the south wall far from the fault there still existed a trend of sinistral motion. The deformation of the north wall was small but recovered fast in a larger area, while the active south wall began to recover from the east section of the fault toward the WSW.展开更多
Based on finite element method, the extrusion deformation process of ground surface during the Lushan earthquake (April 20, 2013) is investigated in this work. In order to construct the finite element model of Lusha...Based on finite element method, the extrusion deformation process of ground surface during the Lushan earthquake (April 20, 2013) is investigated in this work. In order to construct the finite element model of Lushan earthquake structure, the geophysical layer model of Lushan area, the frictional characteristic of slip-weaken along the fault surface, and the Coulomb failure criterion are considered. Through the computation and the comparison with achievement on the Lushan focal dynamics, our researches indicate that: (1) The most extrusion deformation of ground surface occurred in the initial phase of earthquake procession, i.e., between the fourth and sixth seconds after the earthquake occurred. (2) Between the first and sixth seconds after the earthquake, the extrusion deformation concentrates on the surface projection of earthquake fault. (3) Between the first and third seconds after the earthquake, the extrusion deformation of ground surface is very tiny. Meanwhile, the extrusion deformation reaches maximum at the sixth second after earthquake. (4) After 6 s of Lushan earthquake, the extrusion deformation spread out of earthquake structure projection. (5) During the earthquake, the maximum of extrusion deformation on ground surface is larger than the final deformation of the post-earthquake, in other words, the ground extrusion deformation will lastly reach a relatively small value after the Lushan earthquake occurred.展开更多
To further study regional deformation characteristic in the southeast margin of Ordos Block during the period between the Alanshan M5.8 and Yuncheng M4.4 earthquake swarm, we analyze continuous GPS sites around the st...To further study regional deformation characteristic in the southeast margin of Ordos Block during the period between the Alanshan M5.8 and Yuncheng M4.4 earthquake swarm, we analyze continuous GPS sites around the study area. The time-varying strain parameters removed a linear trend deviated from the background state in varying degrees since April, 2015, and began to turn back at the end of the year 2015, meanwhile, the maximum extension strain and shear strain have the bigger variation relative to others. The GPS measurement also shows that the eastward displacement rate of the stations decreases during 2015-2016 in varying degrees compared to 2011-2015, and the variation is closely related to its geologic structural location. The differential movement between the stations is converted into regional strain accumulation due to the fault locking. Further- more, during 2015-2016, the maximum extension rate oriented at near NS direction obviously increased, and the maximum contraction strain direction is changed from NW to EW direction, which contributes to strengthen extension and shear strain of the NE- striking faults, it's consistent with the regional background strain state of Shanxi seismic zone, this may be an important contributor to occurrence of M4.4 earthquake swarm in Yuncheng basin.展开更多
Valuable geological and environmental information can be obtained from the 200 m thick lacustrine sediments in the Diexi lake(an ancient landslide-dammed lake) of the Minjiang River. The shaking table test method was ...Valuable geological and environmental information can be obtained from the 200 m thick lacustrine sediments in the Diexi lake(an ancient landslide-dammed lake) of the Minjiang River. The shaking table test method was employed to study the disturbance phenomena which occurred in the Diexi lake sediments. The results show that the disturbance phenomena were caused by liquefaction-induced flows in the unconsolidated lacustrine sediments, due to triggering by earthquakes. The deformations only occurred in unconsolidated sediment layers and not in consolidated layers. This means that a consolidated layer cannot be liquefied and disturbed again by an earthquake for a second time. The disturbance on one layer corresponds to only one earthquake. The temporal occurrence of earthquakes could be determined by disturbance layers generated at different ages. In total, 10 disturbed layers were found in the lacustrine sediments of the Diexi lake. The experiments showed that there were more than 10 earthquakes between 30 ka B.P. and 15 ka B.P. in the Diexi lake area based on the dating of the disturbed sediment layers.展开更多
Based on three-dimensional joint finite element, this paper discusses the theory and methodology about inversionof geodetic data. The FEM and inversion formula is given in detail; also a related code is developed. By ...Based on three-dimensional joint finite element, this paper discusses the theory and methodology about inversionof geodetic data. The FEM and inversion formula is given in detail; also a related code is developed. By use of theGreen's function about 3-D FEM, we invert geodetic measurementS of coseismic deformation of the 1989 Ms=7. 1Loma Prieta earthquake to datermine itS source mechanism. The result indicates that the slip on the fault plane isvery heterogeneous. The maximum slip and shear stress are located about 10 kin to northwest of the eathquakesource, the stress drop is about more than 1 MPa.展开更多
This paper reviews the recent advances in computing coseismic deformations,and their contributions to seismology and geodesy. At first,an overview on the history of the dislocation theory development is given in the i...This paper reviews the recent advances in computing coseismic deformations,and their contributions to seismology and geodesy. At first,an overview on the history of the dislocation theory development is given in the introduction section. Then,emphasis are given on some new developments through few examples in the following sections,such as the new dislocation theory for a 3D Earth model,a new computing scheme on coseismic deflection change of vertical,the relation of dislocation Love number and the conventional Love numbers,the application of dislocation theory applied in satellite gravity observations,the coseismic deformations observed by GRACE,and a new method to determine dislocation Love numbers by GRACE. Furthermore,some advanced theoretical and cases studies are introduced to illustrate how dislocation theory is important in interpret geodetic data,or invert seismic slip for co- and post-seismic processes,using seismic and geodetic data. Final remarks are given in the last section,with discussions,conclusions,comments on existing problems,and expected methods to solve them.展开更多
The vertical deformation gradient can reflect the rate of vertical change in unit distance,and the vertical deformation velocity gradient can reflect the strength of the earth's crust tectonic activities. In this ...The vertical deformation gradient can reflect the rate of vertical change in unit distance,and the vertical deformation velocity gradient can reflect the strength of the earth's crust tectonic activities. In this paper,using long period leveling data combined with GPS data,the vertical deformation gradient values are calculated. Leveling data and GPS data are two different means of monitoring deformation,but the result is approximately the same vertical deformation gradient. The results show that the spatial distribution of the vertical deformation velocity gradient and tectonic distribution has an obvious correlation. The most significant gradient anomalies along the North-South Seismic Belt are Xianshuihe fault, Longmenshan fault and Xiaojiang-Zemuhe fault, while the second gradient anomalies in the northeastern Qinghai-Tibetan plateau are Zhuanglanghe fault and Lenglongling fault. The Menyuan M_S6. 4 earthquake in 2016 occurred in this abnormal area. However,according to the vertical deformation high gradient area distribution,there is also the possibility of an earthquake occurrence in the Tianzhu and Jingtai area.The area of convergence of three major fault zones is the strongest tectonically active region of the North-South Seismic Belt.展开更多
The Gravity Recovery and Climate Experiment(GRACE) has been measuring temporal and spatial variations of mass redistribution within the Earth system since2002. As large earthquakes cause significant mass changes on ...The Gravity Recovery and Climate Experiment(GRACE) has been measuring temporal and spatial variations of mass redistribution within the Earth system since2002. As large earthquakes cause significant mass changes on and under the Earth's surface,GRACE provides a new means from space to observe mass redistribution due to earthquake deformations. GRACE serves as a good complement to other earthquake measurements because of its extensive spatial coverage and being free from terrestrial restriction. During its over 10 years mission,GRACE has successfully detected seismic gravitational changes of several giant earthquakes,which include the 2004 Sumatra–Andaman earthquake,2010 Maule(Chile) earthquake,and 2011 Tohoku-Oki(Japan) earthquake. In this review,we describe by examples how to process GRACE timevariable gravity data to retrieve seismic signals,and summarize the results of recent studies that apply GRACE observations to detect co- and post-seismic signals and constrain fault slip models and viscous lithospheric structures. We also discuss major problems and give an outlook in this field of GRACE application.展开更多
There are lots of achievements about kinematics of Chinese mainland and its vicinity determined from historic earthquake data, Quaternary fault rates and geodesy observations, which provide basic data for analysis of ...There are lots of achievements about kinematics of Chinese mainland and its vicinity determined from historic earthquake data, Quaternary fault rates and geodesy observations, which provide basic data for analysis of seismic hazard in study areas. Based on impreciseness in using energy of 47 earthquakes with magnitude greater than 7.0 in previous study, we firstly collected source parameters, surface ruptures and displacements of major earthquakes carefully, and divided them into small segmentations with these data gathered. Secondly, we determined contemporary deformation field from latest earthquake mechanisms, Quaternary fault slip rates and geodesy observations. Finally, we evaluated moment deficit of study areas from historic earthquake data and predicted deformation field, and removed 10 percent of aseismic deformation. Combining with previous results, we analyzed the seismic hazard of study areas. The results show that there are some areas with large moment deficit in Chinese mainland. There are also large moment deficit areas, including regions around the Ordos Block, southeastern coast of China and the Bakal rift zone. Previous studies show that there may be some potential earthquakes in the near future in Darts of areas mentioned above.展开更多
基金This work was supported by the National Natural Science Foundation of China (grants 40574007 and 40374013)he radar data used are partially offered by the project ENVISAT A0-711 of Europe Space Administration.
文摘By using the D-InSAR technique, we have acquired the temporal-spatial evolution images of preseismic.cosesimci-postseismic interferometric deformation fields associated with the M 7.9 earthquake of Mani, Tibet on 8 November 1997. The analysis of these images reveals the relationships between the temporal-spatial evolution features of the interferometric deformation fields and locking, rupturing, and elastic restoring of the source rupture plane, which represent the processes of strain accumulation, strain release, and postseismic restoration. The result shows that 10 months prior to the Mani event, a left-lateral shear trend appeared in the seismic area, which was in accordance with the earthquake fault in nature. The quantity of local deformation on the north wall was slightly larger than that on the south wall, and the deformation distribution area of the north wall was relatively large. With the event impending, the deformation of the south wall varied increasingly, and the deformation center shifted eastward. Two and half monthd before the event, the west side of the fault was still locked while the east side began to slide, implying that the whole fault would rupture at any moment. These features can be regarded as short-term precursors to this earthquake. Within the period from 16 April 1996 to two and half months before the earthquake, the most remarkable deformation zones appeared in the north and south walls, which were parallel to and about 40 km apart from the fault, with accumulated local displacements of 344 mm and 251 mm on the north and south walls, respectively. The south wall was the active one with larger displacements. Five months after the earthquake, the distribution feature of interferometric fringes was just opposite to that prior to the event, expressing evident right-lateral shear. The recovered displacements are -179 mm on the north wall and -79 mm on the south wall, close to the east side of the fault. However, in the area of the south wall far from the fault there still existed a trend of sinistral motion. The deformation of the north wall was small but recovered fast in a larger area, while the active south wall began to recover from the east section of the fault toward the WSW.
基金supported by the Basic Research Project of Institute of Geology,China Earthquake Administration(IGCEA1503)
文摘Based on finite element method, the extrusion deformation process of ground surface during the Lushan earthquake (April 20, 2013) is investigated in this work. In order to construct the finite element model of Lushan earthquake structure, the geophysical layer model of Lushan area, the frictional characteristic of slip-weaken along the fault surface, and the Coulomb failure criterion are considered. Through the computation and the comparison with achievement on the Lushan focal dynamics, our researches indicate that: (1) The most extrusion deformation of ground surface occurred in the initial phase of earthquake procession, i.e., between the fourth and sixth seconds after the earthquake occurred. (2) Between the first and sixth seconds after the earthquake, the extrusion deformation concentrates on the surface projection of earthquake fault. (3) Between the first and third seconds after the earthquake, the extrusion deformation of ground surface is very tiny. Meanwhile, the extrusion deformation reaches maximum at the sixth second after earthquake. (4) After 6 s of Lushan earthquake, the extrusion deformation spread out of earthquake structure projection. (5) During the earthquake, the maximum of extrusion deformation on ground surface is larger than the final deformation of the post-earthquake, in other words, the ground extrusion deformation will lastly reach a relatively small value after the Lushan earthquake occurred.
基金supported by the Planned Science and Technology Project of Shanxi Province(20140313023-1)Natural Science Foundation of Shanxi(2011021024-1)
文摘To further study regional deformation characteristic in the southeast margin of Ordos Block during the period between the Alanshan M5.8 and Yuncheng M4.4 earthquake swarm, we analyze continuous GPS sites around the study area. The time-varying strain parameters removed a linear trend deviated from the background state in varying degrees since April, 2015, and began to turn back at the end of the year 2015, meanwhile, the maximum extension strain and shear strain have the bigger variation relative to others. The GPS measurement also shows that the eastward displacement rate of the stations decreases during 2015-2016 in varying degrees compared to 2011-2015, and the variation is closely related to its geologic structural location. The differential movement between the stations is converted into regional strain accumulation due to the fault locking. Further- more, during 2015-2016, the maximum extension rate oriented at near NS direction obviously increased, and the maximum contraction strain direction is changed from NW to EW direction, which contributes to strengthen extension and shear strain of the NE- striking faults, it's consistent with the regional background strain state of Shanxi seismic zone, this may be an important contributor to occurrence of M4.4 earthquake swarm in Yuncheng basin.
基金supported by the National Natural Science Foundation of China (Grant No. 41072230)Funding of State Key Laboratory of Geohazard Prevention and Geoenvironment Protection (SKLGP2012Z008)
文摘Valuable geological and environmental information can be obtained from the 200 m thick lacustrine sediments in the Diexi lake(an ancient landslide-dammed lake) of the Minjiang River. The shaking table test method was employed to study the disturbance phenomena which occurred in the Diexi lake sediments. The results show that the disturbance phenomena were caused by liquefaction-induced flows in the unconsolidated lacustrine sediments, due to triggering by earthquakes. The deformations only occurred in unconsolidated sediment layers and not in consolidated layers. This means that a consolidated layer cannot be liquefied and disturbed again by an earthquake for a second time. The disturbance on one layer corresponds to only one earthquake. The temporal occurrence of earthquakes could be determined by disturbance layers generated at different ages. In total, 10 disturbed layers were found in the lacustrine sediments of the Diexi lake. The experiments showed that there were more than 10 earthquakes between 30 ka B.P. and 15 ka B.P. in the Diexi lake area based on the dating of the disturbed sediment layers.
文摘Based on three-dimensional joint finite element, this paper discusses the theory and methodology about inversionof geodetic data. The FEM and inversion formula is given in detail; also a related code is developed. By use of theGreen's function about 3-D FEM, we invert geodetic measurementS of coseismic deformation of the 1989 Ms=7. 1Loma Prieta earthquake to datermine itS source mechanism. The result indicates that the slip on the fault plane isvery heterogeneous. The maximum slip and shear stress are located about 10 kin to northwest of the eathquakesource, the stress drop is about more than 1 MPa.
基金financially supported by the CAS/CAFEA international partnership Program for creative research teams (No. KZZD-EW-TZ-19)the National Nature Science Foundation of China (No. 41331066 and 41174063)
文摘This paper reviews the recent advances in computing coseismic deformations,and their contributions to seismology and geodesy. At first,an overview on the history of the dislocation theory development is given in the introduction section. Then,emphasis are given on some new developments through few examples in the following sections,such as the new dislocation theory for a 3D Earth model,a new computing scheme on coseismic deflection change of vertical,the relation of dislocation Love number and the conventional Love numbers,the application of dislocation theory applied in satellite gravity observations,the coseismic deformations observed by GRACE,and a new method to determine dislocation Love numbers by GRACE. Furthermore,some advanced theoretical and cases studies are introduced to illustrate how dislocation theory is important in interpret geodetic data,or invert seismic slip for co- and post-seismic processes,using seismic and geodetic data. Final remarks are given in the last section,with discussions,conclusions,comments on existing problems,and expected methods to solve them.
基金jointly funded by the Project of Science for Earthquake Resilience(XH17059)regular projects of Earthquake Monitoring and Prediction(16H38ZX345)
文摘The vertical deformation gradient can reflect the rate of vertical change in unit distance,and the vertical deformation velocity gradient can reflect the strength of the earth's crust tectonic activities. In this paper,using long period leveling data combined with GPS data,the vertical deformation gradient values are calculated. Leveling data and GPS data are two different means of monitoring deformation,but the result is approximately the same vertical deformation gradient. The results show that the spatial distribution of the vertical deformation velocity gradient and tectonic distribution has an obvious correlation. The most significant gradient anomalies along the North-South Seismic Belt are Xianshuihe fault, Longmenshan fault and Xiaojiang-Zemuhe fault, while the second gradient anomalies in the northeastern Qinghai-Tibetan plateau are Zhuanglanghe fault and Lenglongling fault. The Menyuan M_S6. 4 earthquake in 2016 occurred in this abnormal area. However,according to the vertical deformation high gradient area distribution,there is also the possibility of an earthquake occurrence in the Tianzhu and Jingtai area.The area of convergence of three major fault zones is the strongest tectonically active region of the North-South Seismic Belt.
基金supported by the National Natural Science Foundation of China (Grant Nos. 41204017,41228004,and 41274025)the Shanghai Postdoctoral Sustentation Fund (No. 13R21417900)
文摘The Gravity Recovery and Climate Experiment(GRACE) has been measuring temporal and spatial variations of mass redistribution within the Earth system since2002. As large earthquakes cause significant mass changes on and under the Earth's surface,GRACE provides a new means from space to observe mass redistribution due to earthquake deformations. GRACE serves as a good complement to other earthquake measurements because of its extensive spatial coverage and being free from terrestrial restriction. During its over 10 years mission,GRACE has successfully detected seismic gravitational changes of several giant earthquakes,which include the 2004 Sumatra–Andaman earthquake,2010 Maule(Chile) earthquake,and 2011 Tohoku-Oki(Japan) earthquake. In this review,we describe by examples how to process GRACE timevariable gravity data to retrieve seismic signals,and summarize the results of recent studies that apply GRACE observations to detect co- and post-seismic signals and constrain fault slip models and viscous lithospheric structures. We also discuss major problems and give an outlook in this field of GRACE application.
基金sponsored by the monitoring,prediction and studying foundation of China Earthquake Administration(163403)
文摘There are lots of achievements about kinematics of Chinese mainland and its vicinity determined from historic earthquake data, Quaternary fault rates and geodesy observations, which provide basic data for analysis of seismic hazard in study areas. Based on impreciseness in using energy of 47 earthquakes with magnitude greater than 7.0 in previous study, we firstly collected source parameters, surface ruptures and displacements of major earthquakes carefully, and divided them into small segmentations with these data gathered. Secondly, we determined contemporary deformation field from latest earthquake mechanisms, Quaternary fault slip rates and geodesy observations. Finally, we evaluated moment deficit of study areas from historic earthquake data and predicted deformation field, and removed 10 percent of aseismic deformation. Combining with previous results, we analyzed the seismic hazard of study areas. The results show that there are some areas with large moment deficit in Chinese mainland. There are also large moment deficit areas, including regions around the Ordos Block, southeastern coast of China and the Bakal rift zone. Previous studies show that there may be some potential earthquakes in the near future in Darts of areas mentioned above.