Earthquake Hazard Zonation and Seismotectonics of the Bandar Abbas Area, Zagros, Iran

The study area (Bandar Abbas area) is located in the Zagros fold-thrust belt as part of the Alpine-Himalayan orogenic belt as seismically active belt. This area is located between the Makran accretionary prism and Oman Mountains from east and the Zagros collision belt from west as transition zone. The Zagros fold-thrust belt from the viewpoint of seismicity, is very active and Iran’s major earthquake-prone area. The study area has main active faults and some high magnitude earthquakes occurred in current century. Because the Bandar Abbas area has high seismic activity, the main goal of this research is prepared to earthquake hazard zonation and identify hazardous seismic zones, based on Decision Support System method for define active seismotectonic in this area. The seismotectonic study has been done in 30 - 100 km radius, for Bandar Abbas area. In this research, we used Decision Support System method by in corporate and combine essential data such as seismic data from 1900-2015, Digital Elevation Model of the study area (DEM), surface geology, seismicity parameters, soil classification and location main faults. In this research the Decision Support System (DSS) base on GIS database is used for calculate seismicity parameters. Based on the relative risk of earthquake zonation map, the Bandar Abbas area is located from the north to the East and from the South to the East, in area with high seismic risk (with Orange color). Some small regions with very high relative seismic risk have been limited to these areas with high risk. Also from north to west and from south to west “the study area” is located mainly in the area with earthquake relative risk of in areas with moderate and low relative risk of earthquakes. In the far southwestern region of the study, the small area is located in an area with high and very high seismic relative risk and this case may be due to the activity of the Mountain Front Fault (MFF) and Zagros Fore deep Fault (ZFF). Finally, the study area has been affected by active faults and it causes high vulnerability of the study area in the face of a possible occurrence of earthquakes. Based on of Seismotectonic investigations, there are existed minor faults of the Zagros fault from East to West and in the middle part. This case has been caused some parts in the study area with low and moderate seismic risk to be considered in the face of possible earthquakes and seismic damages, as an area with high seismic risk.

Studies of Earthquake Hazard Using Microseismicity Data in Modern Times

This paper selects some representative regions to obtain their G-R relation curves according to their seismicity characteristics,by using ML≥2.0 microseismicity data(1970~1993)in North China.The annual occurrence rate of events of each magnitude can be inferred from the G-R relation.At the same tune,the actual annual occurrence rate of earthquakes of higher magnitudes can be calculated from historical earthquakes(1300-1993)recorded in the same region.It seems that both results are almost the same.Therefore,the rate of events of higher magnitudes can be obtained by using microseismicity data when the proper region is selected.However,two points should be noticed:(1)The method can only give the annual occurrence rate in a seismicity system and estimate the whole situation of the system.(2)When there is a very large earthquake in and near the period in which the microseismicity data are applied,the actual occurrence rate of the system,including this larger earthquake,cannot be obtained by this method.

The Analysis of the Van-Ercis Earthquake,October 23,2011 Turkey,for the Transportation Systems in the Region

This paper investigates the effect of the Van-Ercis, Turkey, (Mw: 7.2)earthquake occurring on 23rd of October, 2011 on the transportation networks in the region. The basic incentivefor this research is to conceptualise the reliability and performance of the networks after the earthquake through the operational and topological analysis of the system. The demand and composition of the traffic along with the behaviour of the pedestrians were taken into account to evaluate the performance of the networks. In addition, the general structure of the cities and towns, as far as planning is concerned, is also paid attention and regarded as one of the main elements for the appraisal. The outcomes obtained are thought very important to be guidance for the expected Istanbul earthquake in the near future.

Detailed sedimentary structure of the Mianning segment of the Anninghe fault zone revealed by H/V spectral ratio

The Anninghe fault is a major left-lateral strike-slip fault in southwest China and a seismic gap with a potential earthquake larger than MW 7.0 lies in the Mianning-Xichang segment according to recent observations.The shallow structure of this region can offer a glimpse into the geometry of the fault,which plays an important role in earthquake hazard mitigation.To further investigate the sedimentary structure of the Anninghe fault zone,two dense linear arrays with a station spacing of around 80 m were deployed across the fault.In this study,the H/V spectral ratio(HVSR),together with its peak frequency at each station site,was obtained by applying the Nakamura method.Our findings demonstrate that the peak frequency behaves in high correlation with lithology and is controlled by topography.HVSR in foothills or regions with magmatic intrusion shows a single peak at about 2–3 Hz.In locations with abundant Quaternary sedimentation,such as Anninghe valleys and fracture zones,another low-frequency peak around 0.4 Hz can be noticed in HVSR.By using the empirical relationship,the thickness of the sedimentary layer around the fault fracture zone is estimated to be 300–600 m.Furthermore,the sedimentary interface shows a downward dip to the east,possibly influenced by the east-west extrusion stress.Considering the resonance effect,buildings with 6–9 stories in the valley area of the Anninghe require additional attention in earthquake hazard prevention.

Spatial-temporal characterization of the San Andreas Fault by fault-zone trapped waves at seismic experiment site,Parkfield,California

In this article,we review our previous research for spatial and temporal characterizations of the San Andreas Fault(SAF)at Parkfield,using the fault-zone trapped wave(FZTW)since the middle 1980s.Parkfield,California has been taken as a scientific seismic experimental site in the USA since the 1970s,and the SAF is the target fault to investigate earthquake physics and forecasting.More than ten types of field experiments(including seismic,geophysical,geochemical,geodetic and so on)have been carried out at this experimental site since then.In the fall of 2003,a pair of scientific wells were drilled at the San Andreas Fault Observatory at Depth(SAFOD)site;the main-hole(MH)passed a~200-m-wide low-velocity zone(LVZ)with highly fractured rocks of the SAF at a depth of~3.2 km below the wellhead on the ground level(Hickman et al.,2005;Zoback,2007;Lockner et al.,2011).Borehole seismographs were installed in the SAFOD MH in 2004,which were located within the LVZ of the fault at~3-km depth to probe the internal structure and physical properties of the SAF.On September 282004,a M6 earthquake occurred~15 km southeast of the town of Parkfield.The data recorded in the field experiments before and after the 2004 M6 earthquake provided a unique opportunity to monitor the co-mainshock damage and post-seismic heal of the SAF associated with this strong earthquake.This retrospective review of the results from a sequence of our previous experiments at the Parkfield SAF,California,will be valuable for other researchers who are carrying out seismic experiments at the active faults to develop the community seismic wave velocity models,the fault models and the earthquake forecasting models in global seismogenic regions.