Robust sliding mode control for fractional-order chaotic economical system with parameter uncertainty and external disturbance

This paper presents a modified sliding mode control for fractional-order chaotic economical systems with parameter uncertainty and external disturbance. By constructing the suitable sliding mode surface with fractional-order integral, the effective sliding mode controller is designed to realize the asymptotical stability of fractional-order chaotic economical systems. Comparing with the existing results, the main results in this paper are more practical and rigorous. Simulation results show the effectiveness and feasibility of the proposed sliding mode control method.

Integrated assessment of yield,nitrogen use efficiency and ecosystem economic benefits of use of controlled-release and common urea in ratoon rice production

Controlled-release urea(CRU)is commonly used to improve the crop yield and nitrogen use efficiency(NUE).However,few studies have investigated the effects of CRU in the ratoon rice system.Ratoon rice is the practice of obtaining a second harvest from tillers originating from the stubble of the previously harvested main crop.In this study,a 2-year field experiment using a randomized complete block design was conducted to determine the effects of CRU on the yield,NUE,and economic benefits of ratoon rice,including the main crop,to provide a theoretical basis for fertilization of ratoon rice.The experiment included four treatments:(i)no N fertilizer(CK);(ii)traditional practice with 5 applications of urea applied at different crop growth stages by surface broadcasting(FFP);(iii)one-time basal application of CRU(BF1);and(iv)one-time basal application of CRU combined with common urea(BF2).The BF1 and BF2 treatments significantly increased the main crop yield by 17.47 and 15.99%in 2019,and by 17.91 and 16.44%in 2020,respectively,compared with FFP treatment.The BF2 treatment achieved similar yield of the ratoon crop to the FFP treatment,whereas the BF1 treatment significantly increased the yield of the ratoon crop by 14.81%in 2019 and 12.21%in 2020 compared with the FFP treatment.The BF1 and BF2 treatments significantly improved the 2-year apparent N recovery efficiency,agronomic NUE,and partial factor productivity of applied N by 11.47-16.66,27.31-44.49,and 9.23-15.60%,respectively,compared with FFP treatment.The BF1 and BF2 treatments reduced the chalky rice rate and chalkiness of main and ratoon crops relative to the FFP treatment.Furthermore,emergy analysis showed that the production efficiency of the BF treatments was higher than that of the FFP treatment.The BF treatments reduced labor input due to reduced fertilization times and improved the economic benefits of ratoon rice.Compared with the FFP treatment,the BF1 and BF2 treatments increased the net income by 14.21-16.87 and 23.76-25.96%,respectively.Overall,the one-time blending use of CRU and common urea should be encouraged to achieve high yield,high nitrogen use efficiency,and good quality of ratoon rice,which has low labor input and low apparent N loss.

Changes of China’s Status in the Global System and Its Influencing Factors:A Multiple Contact Networks Perspective

Clarifying China’s position in the global system is an important logical basis for developing national diplomacy.Although much research has been done on China’s development status,most studies have been based on country comparisons or institutional en-vironment.In today’s networked era in which the global economy,trade,personnel,and information are closely connected,studies on China’s global position and its status changes and influencing factors in multiple contact networks are still insufficient.In this study,from the perspective of diverse global contact networks,we constructed economic,cultural,and political influence indices to explore the changes and influencing factors on China’s status in the global system from 2005 to 2018.The results show that during the study period,China’s global influence in the fields of economic ties,cultural exchanges,and political contacts increased significantly,but its influ-ence in the fields of cultural exchanges and political contacts lagged far economic ties.The pattern of China’s economic influence on various economies around the world has shown a transformation from an‘upright pyramid’to an‘inverted pyramid’structure.The proportion of these economies in low-influence zones has decreased from more than 60%in 2005 to less than 20%in 2018.China’s cultural and political influence on various economies around the world has increased significantly;however,for the former,the percentage of high-influence areas is still less than 20%,whereas for the latter the percentage of these economies in medium-and high-influence areas is still less than 50%.Analyses such as a scatter plot matrix show that geographical proximity,economic globalization,close cooperation with developing countries,and a proactive and peaceful foreign policy are important factors in improving China’s status in the diverse global network system.

A PI+R Control Scheme Based on Multi-Agent Systems for Economic Dispatch in Isolated BESSs

Battery energy storage systems(BESSs)are widely used in smart grids.However,power consumed by inner impedance and the capacity degradation of each battery unit become particularly severe,which has resulted in an increase in operating costs.The general economic dispatch(ED)algorithm based on marginal cost(MC)consensus is usually a proportional(P)controller,which encounters the defects of slow convergence speed and low control accuracy.In order to solve the distributed ED problem of the isolated BESS network with excellent dynamic and steady-state performance,we attempt to design a proportional integral(PI)controller with a reset mechanism(PI+R)to asymptotically promote MC consensus and total power mismatch towards 0 in this paper.To be frank,the integral term in the PI controller is reset to 0 at an appropriate time when the proportional term undergoes a zero crossing,which accelerates convergence,improves control accuracy,and avoids overshoot.The eigenvalues of the system under a PI+R controller is well analyzed,ensuring the regularity of the system and enabling the reset mechanism.To ensure supply and demand balance within the isolated BESSs,a centralized reset mechanism is introduced,so that the controller is distributed in a flow set and centralized in a jump set.To cope with Zeno behavior and input delay,a dwell time that the system resides in a flow set is given.Based on this,the system with input delays can be reduced to a time-delay free system.Considering the capacity limitation of the battery,a modified MC scheme with PI+R controller is designed.The correctness of the designed scheme is verified through relevant simulations.

Evaluation of Economical and Intensive Use of Construction Land in a County Town:A case study of Wan’an County,Ji’an City

Taking the changes of construction land in Wan’an County over the years as the research object,the quantity and spatial characteristics of construction land in Wan’an County were analyzed,and the overall situation and regional differences of construction land utilization in Wan’an County were revealed.From the aspects of main influencing factors such as land use structure,land use intensity,land input intensity and output benefit,an evaluation indicator system was established to evaluate the economical and intensive use level of construction land in Wan’an County.The results show that the score of the economical and intensive use level of construction land in Wan’an County was 56.92,which was the lowest among all the districts and counties in Ji’an City.Based on the evaluation results,the corresponding economizing and intensive strategies were put forward,and the safeguard measures for its implementation were explored.The purpose is to provide some support for the preparation of territorial spatial planning,the delineation of urban development boundaries,and the potential exploitation of construction land stock,hoping to improve the utilization efficiency and benefit of construction land in Wan’an County,and promote the economic growth of Wan’an County to the stage of high-quality development.

Economic Analysis Study of Agricultural and Solar Complementary System

Agro-photovoltaic complementary system(APCS)is an innovative land use model combining agricultural production with photovoltaic power generation,aiming to realize dual land use and improve land use efficiency and economic benefits by installing photovoltaic panels on farmland.With the growth of global energy demand and the intensification of climate change,agro-photovoltaic(APV)systems have received widespread attention as a sustainable energy solution.Studies have shown that agro-photovoltaic systems exhibit significant economic benefits in different regions and crop types.Through reasonable system design and optimization,the agricultural and photovoltaic complementary system is not only technically feasible,but also has significant economic advantages,which provides a strong support for achieving the goal of sustainable development.

Sustainability Assessment of Banana (Musa spp.) Yield Gap Reduction through Value Chain Development Interventions in Smallholder Farming Systems in Manicaland, Zimbabwe

This study evaluated the effectiveness of donor supported agricultural value chain development projects in sustainably narrowing yield gaps for banana smallholder farmer producers in Manicaland, Zimbabwe. The study used a mixed methods research design that relied on farmers records for the quantitative analysis and focus group discussion and in-depth interviews for key experts for the qualitative aspects. A mix of regression analysis, t-tests, Pearsons’s correlation and analysis of variance statistical methods were used for the quantitative analysis while thematic response analysis was used for the qualitative engagements. The findings showed that by the end of the activity, the project had successfully narrowed the banana yield gaps to 18.66 tons per hectare working with a potential yield base of 40 tons. However, 5 years after the project closure the yield gap had fallen to 24.7 tons indicating a lack of sustainability of yield gap reduction. However, the yield gap slump does not override the fact that farmers on average were still able to sell approximately 5 tons per every 6 months after 5 years from the project closure which is beyond any poverty threshold. This suggests genuine upward economic mobility. Additionally, in analyzing what factors had the greatest influence on yield gap reduction, the access to fertilizer ranked highest where genetics, irrigation and improved agronomy followed in that respective order. The study further showed that farmers who receive value chain development support whilst at an already commercialized state tend to maintain productivity thresholds higher in comparison to those who are at a pre commercial state. This is evidenced by the fact that the pre commercial farmers had a yield reduction of 30.83 percent after 5 years of the project closure whereas the former realized a productivity growth of 7.84%. In conclusion, whilst the intervention was successful in transitioning farmers out of poverty, more investment should be made towards transitioning smallholder farmers to integrated soil fertility management practices and improvement of agronomic efficiency through stronger on field collaboration between research institutions, the government and development institutions.

Study of Canada’s Economic System from a System Thinking Perspective

This article analyzes Canada’s economic system from a systems thinking perspective.The content includes patterns of public choice(party system and power distribution),organizational framework of decision-making arrangements,information provision and coordination mechanisms,property rights system,incentive system,and welfare system.Canada’s economic system significantly influences the development of the Canadian economy,and its economic system arrangements hold reference significance for other developed and developing countries.

Exploration of the Construction of Economic Service Trade System under the Background of Hainan Free Trade Port

China has a large population,a large middle-income group,and a wide consumer market coverage.In the context of economic globalization,the connection between the Chinese economy and the world industrial chain has been further strengthened,contributing to the development of the global economy.Under the background of the Hainan Free Trade Port,building an economic service trade system will help to create a new highland for economic service trade,promote the development of China’s service trade,and facilitate the rational allocation of resources on a global scale.Because of this,the article will analyze the opportunities for building an economic service trade system and the challenges of building an economic service trade system under the background of Hainan Free Trade Port,and focus on analyzing the path strategies for building an economic service trade system to create a high-level new highland of service trade and actively face the challenges of era development and economic upgrading[1].

Benefits of Dielectric Oil Regeneration Systems in Power Transmission Networks: A Case Study

The criticality of transformers and reactors in the power transmission network and the paramount importance of ensuring their reliability through maintenance of the insulating oil is known. This paper presents a comprehensive examination of the efficacy and economic viability of a dielectric oil regeneration system, as implemented by the Transmission System Maintenance Department (TSMD) of the Independent Power Transmission Operator (IPTO), Greece’s sole transmission operator. Through a detailed chemical analysis and performance evaluation, we assess the impact of the regeneration system on treated insulating oil quality over multiple cycles. The study reveals that the electrical properties of the insulating oil are fully restored after regeneration, negating the need to fully replace it, while the investment becomes cost-neutral within weeks from the commissioning of the regeneration system. This economic analysis, coupled with the system’s environmental benefits of reducing waste oil generation, positions the dielectric oil regeneration system as a compelling solution for the maintenance of power transmission assets.

Studies on the Economical and Practical Temperature Control Facility of Deep-Litter Systems for Swine Production

Deep-Litter System is a high yield approach to raise swine with pollution free in a lower cost. In the research, based on the heat stress in summer caused by fermentation, three temperature-control systems were designed, including natural ventilation through transoms, forced ventilation via fans, and cooling by hyperbaric spray system. Specifically, the latter intermittent auto-pressurized spray system developed in our lab, which could spray successively via pressure from storage tubes without wetting the fermentation bed, is suitable for the promotion with the deep-litter technology in rural regions , since the power consumption is only 1 kwh per day.

Multiobjective economic model predictive control using utopia-tracking for the wet flue gas desulphurization system

Efficient control of the desulphurization system is challenging in maximizing the economic objective while reducing the SO_(2) emission concentration. The conventional optimization method is generally based on a hierarchical structure in which the upper optimization layer calculates the steady-state results and the lower control layer is responsible to drive the process to the target point. However, the conventional hierarchical structure does not take the economic performance of the dynamic tracking process into account. To this end, multi-objective economic model predictive control(MOEMPC) is introduced in this paper, which unifies the optimization and control layers in a single stage. The objective functions are formulated in terms of a dynamic horizon and to balance the stability and economic performance. In the MOEMPC scheme, economic performance and SO_(2) emission performance are guaranteed by tracking a set of utopia points during dynamic transitions. The terminal penalty function and stabilizing constraint conditions are designed to ensure the stability of the system. Finally, an optimized control method for the stable operation of the complex desulfurization system has been established. Simulation results demonstrate that MOEMPC is superior over another control strategy in terms of economic performance and emission reduction, especially when the desulphurization system suffers from frequent flue gas disturbances.

Engineering DNA Materials for Sustainable Data Storage Using a DNA Movable-Type System

DNA molecules are green materials with great potential for high-density and long-term data storage.However,the current data-writing process of DNA data storage via DNA synthesis suffers from high costs and the production of hazards,limiting its practical applications.Here,we developed a DNA movable-type storage system that can utilize DNA fragments pre-produced by cell factories for data writing.In this system,these pre-generated DNA fragments,referred to herein as“DNA movable types,”are used as basic writing units in a repetitive way.The process of data writing is achieved by the rapid assembly of these DNA movable types,thereby avoiding the costly and environmentally hazardous process of de novo DNA synthesis.With this system,we successfully encoded 24 bytes of digital information in DNA and read it back accurately by means of high-throughput sequencing and decoding,thereby demonstrating the feasibility of this system.Through its repetitive usage and biological assembly of DNA movable-type fragments,this system exhibits excellent potential for writing cost reduction,opening up a novel route toward an economical and sustainable digital data-storage technology.

Economical Requirements Elicitation Techniques During COVID-19: A Systematic Literature Review

Requirements elicitation is a fundamental phase of software development in which an analyst discovers the needs of different stakeholders and transforms them into requirements.This phase is cost-and time-intensive,and a project may fail if there are excessive costs and schedule overruns.COVID-19 has affected the software industry by reducing interactions between developers and customers.Such a lack of interaction is a key reason for the failure of software projects.Projects can also fail when customers do not know precisely what they want.Furthermore,selecting the unsuitable elicitation technique can also cause project failure.The present study,therefore,aimed to identify which requirements elicitation technique is the most cost-effective for large-scale projects when time to market is a critical issue or when the customer is not available.To that end,we conducted a systematic literature review on requirements elicitation techniques.Most primary studies identified introspection as the best technique,followed by survey and brainstorming.This finding suggests that introspection should be the first choice of elicitation technique,especially when the customer is not available or the project has strict time and cost constraints.Moreover,introspection should also be used as the starting point in the elicitation process of a large-scale project,and all known requirements should be elicited using this technique.

Optimization of extended warranty cost for multi-component systems with economic dependence based on group maintenance

During extended warranty(EW)period,maintenance events play a key role in controlling the product systems within normal operations.However,the modelling of failure process and maintenance optimization is complicated owing to the complex features of the product system,namely,components of the multi-component system are interdependent with each other in some form.For the purpose of optimizing the EW pricing decision of the multi-component system scientifically and rationally,taking the series multi-component system with economic dependence sold with EW policy as a research object,this paper optimizes the imperfect preventive maintenance(PM)strategy from the standpoint of EW cost.Taking into consideration adjusting the PM moments of the components in the system,a group maintenance model is developed,in which the system is repaired preventively in accordance with a specified PM base interval.In order to compare with the system EW cost before group maintenance,the system EW cost model before group maintenance is developed.Numerical example demonstrates that offering group maintenance programs can reduce EW cost of the system to a great extent,thereby reducing the EW price,which proves to be a win-win strategy to manufacturers and users.

Finite-time economic model predictive control for optimal load dispatch and frequency regulation in interconnected power systems

This paper presents a finite-time economic model predictive control(MPC)algorithm that can be used for frequency regulation and optimal load dispatch in multi-area power systems.Economic MPC can be used in a power system to ensure frequency stability,real-time economic optimization,control of the system and optimal load dispatch from it.A generalized terminal penalty term was used,and the finite-time convergence of the system was guaranteed.The effectiveness of the proposed model predictive control algorithm was verified by simulating a power system,which had two areas connected by an AC tie line.The simulation results demonstrated the effectiveness of the algorithm.

Two-Stage Optimal Dispatching of Wind Power-Photovoltaic-Solar Thermal Combined System Considering Economic Optimality and Fairness

Aiming at the problems of large-scale wind and solar grid connection,how to ensure the economy of system operation and how to realize fair scheduling between new energy power stations,a two-stage optimal dispatching model of wind power-photovoltaic-solar thermal combined system considering economic optimality and fairness is proposed.Firstly,the first stage dispatching model takes the overall economy optimization of the system as the goal and the principle of maximizing the consumption of wind and solar output,obtains the optimal output value under the economic conditions of each new energy station,and then obtains the maximum consumption space of the new energy station.Secondly,based on the optimization results of the first stage,the second stage dispatching model uses the dispatching method of fuzzy comprehensive ranking priority to prioritize the new energy stations,and then makes a fair allocation to the dispatching of the wind and solar stations.Finally,the analysis of a specific example shows that themodel can take into account the fairness of active power distribution of new energy stations on the basis of ensuring the economy of system operation,make full use of the consumption space,and realize the medium and long-term fairness distribution of dispatching plan.

Two-Stage Low-Carbon Economic Dispatch of Integrated Demand Response-Enabled Integrated Energy System with Ladder-Type Carbon Trading

Driven by the goal of“carbon neutrality”and“emission peak”,effectively controlling system carbon emissions has become significantly important to governments around the world.To this end,a novel two-stage low-carbon economic scheduling framework that considers the coordinated optimization of ladder-type carbon trading and integrated demand response(IDR)is proposed in this paper for the integrated energy system(IES),where the first stage determines the energy consumption plan of users by leveraging the price-based electrical-heat IDR.In contrast,the second stage minimizes the system total cost to optimize the outputs of generations with consideration of the uncertainty of renewables.In addition,to fully exploit the system’s emission reduction potential,a carbon trading cost model with segmented CO_(2) emission intervals is built by introducing a reward-penalty ladder-type carbon trading mechanism,and the flexible thermal comfort elasticity of customers is taken into account by putting forward a predicted mean vote index on the load side.The CPLEX optimizer resolves the two-stage model,and the study results on a modified IES situated in North China show the proposed model can effectively reduce carbon emissions and guarantee economical efficiency operation of the system.

Optimizing Grids Demand Reduction through Enhanced Heat Transfer in Low-Temperature Waste Heat Driven ORC Systems

With increasing awareness of energy conservation and environmental protection, the Organic Rankine Cycle (ORC) system has gained significant attention. This technology enables the recovery of industrial waste heat, waste incineration heat, and renewable energy sources such as geothermal heat, biomass energy, and solar energy at lower temperatures. However, the low-grade heat source utilized in ORC systems faces a challenge to achieving high power generation efficiency and output power. Therefore, enhancing the power generation capacity of ORC systems is a key research focus in this field. An entranced heat exchanger ORC system with the screw expander driven by the low-temperature heat source is established to investigate the relevant performance. Hot water temperature from 77°C to 132°C is adopted for performance analysis, while the environmental temperature is approximately 25°C. Refrigerant R245fa is selected as the working fluid, and the screw expander is employed for power generation. It is worth noting that the entranced heat exchanger ORC system has significant potential for low-temperature heat recovery. Experimental results indicate that the maximum power output is 12.83 kW, which is obtained at around 105°C hot water inlet temperature. Correspondingly, the average power output remains 11.75 kW, revealing the system’s high stability for power generation. The implementation of a plate heat exchanger for enhanced heat transfer has enabled a 50% reduction in system size compared to traditional shell-tube type ORC systems. Besides, economic calculations demonstrate substantial benefits associated with the ORC system. The calculations indicate an internal benefit of 560,000 RMB/year, accompanied by notable external benefits such as an energy saving and emission reduction potential of up to 784 t CO2 per year. Moreover, the payback period is 2.23 years. It shows a remarkable improvement in terms of performance and excellent economic benefits. As a result, the novel ORC presents a promising alternative for low-grade heat utilization as compared to conventional small-scale ORC systems.

Study on the Mathematical Model of Technology Diffusion in Technical Economic System

In the technical and economic system,there is a certain interaction between various technologies,mainly in the form of technology diffusion.By constructing the mathematical model of technology diffusion,the trend of technology diffusion can be predicted,the reasonable distribution of science and technology productivity can be realized,and the policy optimization measures can be formulated on the basis of evaluating the existing policies.This paper first points out the basic idea of digital model of technology diffusion,and then focuses on the analysis of various parameters of mathematical model of technology diffusion,and puts forward the application conclusion of mathematical model of technology diffusion,in order to provide reference for relevant industry personnel.