Research on Long Stroke Moving Secondary Permanent Magnet Linear Eddy Current Brake

In this paper,a long stroke moving secondary permanent magnet linear eddy current brake is proposed.Without exciting coils,the permanent magnet eddy current brake possesses the advantage of saving copper and better reliability.The topology and operating principle are presented.The mathematical model was derived with the layer theory.The braking force characteristic was analyzed using the finite element method.The structural parameters of the long stroke moving secondary permanent magnet linear eddy current brake were studied by referring the design progress of the other types of eddy current brakes.Finally,a prototype of long stroke moving secondary permanent magnet linear eddy current brake was built and tested,and the experimental result verifies the correctness of the above analysis.

Characteristic and Thermal Analysis of Permanent Magnet Eddy Current Brake

In this paper,the subdomain analysis model of the eddy current brake(ECB)is established.By comparing with the finite element method,the accuracies of the subdomain model and the finite element model are verified.Furthermore,the resistance characteristics of radial,axial,andHalbach arrays under impact load are calculated and compared.The axial array has a large braking force coefficient but low critical velocity.The radial array has a low braking force coefficient but high critical velocity.The Halbach array has the advantages of the first two arrays.Not only the braking force coefficient is large,but also the critical speed is high.The parameter analysis of the Halbach array is further carried out.The inner tube thickness and air gap length are the sensitive factors of resistance characteristics.The demagnetization effect is significantly enhanced by the increase of the inner tube thickness.In order to ensure that the ECB does not overheat,the electromagnetic-thermal coupling model is established based on the heat transfer theory.The temperature rise of the inner tube is obvious while that of the permanentmagnet is small.The temperature rise of the inner tube is more than 20 K each time,and that of the permanent magnet is less than 1 K each time.

Rail temperature rise characteristics caused by linear eddy current brake of high-speed train

The rail temperature rises when the linear eddy current brake of high-speed train is working, which may lead to a change of rail physical characteristics or an effect on train operations. Therefore, a study concerning the characteristics of rail temperature rise caused by eddy current has its practical necessity. In the research, the working principle of a linear eddy current brake is introduced and its FEA model is established. According to the generation mechanism of eddy current, the theoretical formula of the internal energy which is produced by the eddy current is deduced and the thermal load on the rail is obtained. ANSYS is used to simulate the rail temperature changes under different conditions of thermal loads. The research result shows the main factors which contribute to the rising of rail temperature are the train speed, brake gap and exciting current. The rail temperature rises non-linearly with the in- crease of train speed. The rail temperature rise curve is more sensitive to the exciting current than the air gap. Moreover, the difference stimulated by temperature rising between rails of 60 kg/m and 75 kg/m is presented as well.