Edge detection of potential field data based on image processing methods

The conventional methods of edge detection can roughly delineate edge position of geological bodies,but there are still some problems such as low detection accuracy and being susceptible to noise interference.In this paper,three image processing methods,Canny,Lo G and Sobel operators are briefly introduced,and applied to edge detection to determine the edge of geological bodies.Furthermore,model data is built to analyze the edge detection ability of this image processing methods,and compare with conventional methods.Combined with gravity anomaly of Sichuan basin and magnetic anomaly of Zhurihe area,the detection effect of image processing methods is further verified in real data.The results show that image processing methods can be applied to effectively identify the edge of geological bodies.Moreover,when both positive and negative anomalies exist and noise is abundant,fake edge can be avoided and edge division is clearer,and satisfactory results of edge detection are obtained.

Real-time image processing and display in object size detection based on VC++

Real-time detection for object size has now become a hot topic in the testing field and image processing is the core algorithm. This paper focuses on the processing and display of the collected dynamic images to achieve a real-time image pro- cessing for the moving objects. Firstly, the median filtering, gain calibration, image segmentation, image binarization, cor- ner detection and edge fitting are employed to process the images of the moving objects to make the image close to the real object. Then, the processed images are simultaneously displayed on a real-time basis to make it easier to analyze, understand and identify them, and thus it reduces the computation complexity. Finally, human-computer interaction （HCI）-friendly in- terface based on VC ＋＋ is designed to accomplish the digital logic transform, image processing and real-time display of the objects. The experiment shows that the proposed algorithm and software design have better real-time performance and accu- racy which can meet the industrial needs.

Novel welding image processing method based on fractal theory

Computer vision has come into used in the fields of welding process control and automation. In order to improve precision and rapidity of welding image processing, a novel method based on fractal theory has been put forward in this paper. Compared with traditional methods, the image is preliminarily processed in the macroscopic regions then thoroughly analyzed in the microscopic regions in the new method. With which, an image is divided up to some regions according to the different fractal characters of image edge, and the fuzzy regions including image edges are detected out, then image edges are identified with Sobel operator and curved by LSM (Lease Square Method). Since the data to be processed have been decreased and the noise of image has been reduced, it has been testified through experiments that edges of weld seam or weld pool could be recognized correctly and quickly.

APPLICATION OF MVP IN REAL TIME IMAGE PROCESSING

MVP is a digital signal processor, which is of MIMD structure and fit for multimedia application. MVP has several processors in it, and its operation is characteristic of parallelism and pipeline; therefore, real-time signal processing can be done on it. This paper presents the image processing system based on MVP, explains the principles of parallel task assignment and hardware pipeline design, and gives out the example of target tracking and edge detection.

Techniques of Image Processing Based on Artificial Neural Networks

This paper presented an online quality inspection system based on artificial neural networks. Chromatism classification and edge detection are two difficult problems in glass steel surface quality inspection. Two artificial neural networks were made and the two problems were solved. The one solved chromatism classification. Hue, saturation and their probability of three colors, whose appearing probabilities were maximum in color histogram, were selected as input parameters, and the number of output node could be adjusted with the change of requirement. The other solved edge detection. In this neutral network, edge detection of gray scale image was able to be tested with trained neural networks for a binary image. It prevent the difficulty that the number of needed training samples was too large if gray scale images were directly regarded as training samples. This system is able to be applied to not only glass steel fault inspection but also other product online quality inspection and classification.

Automatic Traffic Using Image Processing

The frequent traffic jams at major intersections call for an effective management system. The paper suggests implementing a smart traffic controller using real-time image processing. The sequence of the camera is analyzed using different edge detection algorithms and object counting methods. Previously they used matching method that means the camera will be installed along with traffic light. It will capture the image sequence. To set an image of an empty road as a reference image, the captured images are sequentially matched using image matching;but in my paper, we used filtering method, which filtered the image and released all waste objects and only showed the cars, and after it well showed the number of cars in image. My paper is software that takes a picture or video. It has been customized to be used in the future to control the traffic light sign by giving each sign sufficient time, depending on the number of cars on each direction.

Feature fusion method for edge detection of color images

A novel feature fusion method is proposed for the edge detection of color images. Except for the typical features used in edge detection, the color contrast similarity and the orientation consistency are also selected as the features. The four features are combined together as a parameter to detect the edges of color images. Experimental results show that the method can inhibit noisy edges and facilitate the detection for weak edges. It has a better performance than conventional methods in noisy environments.

SAR image despeckling based on edge detection and nonsubsampled second generation bandelets

To preserve the sharp features and details of the synthetic aperture radar （SAR） image effectively when despeckling, a despeckling algorithm with edge detection in nonsubsampled second generation bandelet transform （NSBT） domain is proposed. First, the Canny operator is utilized to detect and remove edges from the SAR image. Then the NSBT which has an optimal approximation to the edges of images and a hard thresholding rule are used to approximate the details while despeckling the edge-removed image. Finally, the removed edges are added to the reconstructed image. As the edges axe detected and protected, and the NSBT is used, the proposed algorithm reaches the state-of-the-art effect which realizes both despeckling and preserving edges and details simultaneously. Experimental results show that both the subjective visual effect and the mainly objective performance indexes of the proposed algorithm outperform that of both Bayesian wavelet shrinkage with edge detection and Bayesian least square-Gaussian scale mixture （BLS-GSM）.

An Improved Algorithm for Image Edge Detection Based on Lifting Scheme

Wavelet transform is an ideal way for edge detection because of its multi-scale property, localization both in time and frequency domain, sensitivity to the abrupt change of signals, and so on. An improved algorithm for image edge detection based on Lifting Scheme is proposed in this paper. The simulation results show that our improved method can better reflect edge information of images.

Study on the Microstructure of Loess in Meizoseismal Zone

In this paper, quantitative study on the microstructure of loess is done based on the study of seismic subsidences of the Yongdeng M_S5.8 earthquake in 1995. Using SEM and image processing techniques, a comparison analysis on the microstructure of loess is done and distribution curves of loess pores are obtained. Based on laser grain analyzer test and trellis structure changes under earthquake effect, the dynamic properties of loess are explained. At the same time, pore distribution of loess from seismic zone and non-seismic zone is compared. The result shows that the pore distribution features of different meizoseismal zones are different, and even that loess at the similar depths has substantial differences, too.

AN ALGORITHM OF EDGE DETECTION BASED ON ENTROPY OPERATOR

This paper presents an algorithm of edge detection in image processing. A new entropy operator and threshold estimation technique are effectively proposed. The algorithm overcomes some drawbacks of Shiozaki operator. It not only has higher speed but also can extract the edge better. Finally, an example of 2D image is given to demonstrate the usefulness and advantages of the algorithm.

Collapse behavior and microstructural evolution of loess soils from the Loess Plateau of China

Loess soils are characterized by metastable microstructure, high porosity and water-sensitivity. These soils have always been problematic soils and attracted attention from researchers all over the world. In the present study, three loess soils extracted at various depths from the Loess Plateau of China, i.e. Malan(Q_3), upper Lishi(Q_2~2) and lower Lishi(Q_2~1) loess soils, were studied. Single oedometer-collapse tests were performed on intact loess specimens to investigate the collapse behavior of three loess soils. The microstructure and chemical composition of each loess before and after collapse test were characterized using scanning electron microscopy(i.e. SEM) and energy dispersive spectroscopy(i.e. EDS) techniques. The microstructural evolution due to wetting collapse was interpreted qualitatively and quantitatively in terms of the pore morphology properties. The results suggest that:(1) the collapse potential of each loess may rise again after a round of rise and drop, which could be failure of the new-developed stable structure under quite high vertical pressure. It implies that loess may collapse even if it has collapsed.(2) Q_3, Q_2~2 and Q_2~1 loess have different types of microstructure, namely, granule, aggregate and matrix type of microstructure, respectively.(3) The microstructural evolution due to loading and wetting is observed from a granule type to an aggregate type and finally to a matrix type of structure. The variations in distributions of pore morphology properties indicate that collapse leads to a transformation of large-sized pores into small-sized pores, re-orientation and remolding of soil pores due to particle rearrangement.(4) A porous structure is essential for loess collapse; however, the non-water-stability of bonding agents promotes the occurrence of collapse under the coupling effect of loading and wetting.

Feature Recognition of Low-resolution Fiber Image

The interpolatory edge operator is applied to the recognition of cotton and ramie fibers. Its performance is studied in comparison with the Canny edge operator in the fiber’s edge detection for cross-sectional image. The input image is interpolated other than Gaussian function smoothing. The quality of edge output is improved by the interpolatory edge operator. It produces edge output with good continuity for low-resolution input. The fine edge output, such as cross-markings, can be distinguished clearly, so the interpolatory edge operator is suitable for the study of cotton and ramie fibers. Furthermore, the application of the interpolatory edge operator can cut the hardware cost, reduce the storage and speed up the data transmission.

Edge-Weighted Centroidal Voronoi Tessellations

Most existing applications of centroidal Voronoi tessellations(CVTs) lack consideration of the length of the cluster boundaries.In this paper we propose a new model and algorithms to produce segmentations which would minimize the total energy—a sum of the classic CVT energy and the weighted length of cluster boundaries.To distinguish it with the classic CVTs,we call it an Edge-Weighted CVT(EWCVT).The concept of EWCVT is expected to build a mathematical base for all CVT related data classifications with requirement of smoothness of the cluster boundaries.The EWCVT method is easy in implementation,fast in computation,and natural for any number of clusters.

Canny edge detector and its application to analyze the brazed joint interfaces

Image processing is widely used as a method for visnal inspection in industry. Analyzing the microstructure image of a brazed joint is a very important part of the quality control in products related to brazing aUoys. Edge detection techniques are introduced to analyze the bonding strength of the brazing alloys in this paper. Gaussian filter is used for image smoothing. The sharp edge map produced by the Canny edge detector is added to the smoothed noisy image to generate the edge image, which can show the brazing elements clearly. Using the Canny edge detector as a tool to analyze the bonding strength of brazed joint, the experiment results are robust with a very high level. Therefore, the Canny edge detector can be reliably used to analyze the brazed joint interfaces.

Edge Detection Based on Generative Adversarial Networks

Aiming at the problem that the detection effect of traditional edge detection algorithm is not good,and the problem that the existing edge detection algorithm based on convolution network cannot solve the thick edge problem from the model itself,this paper proposes a new edge detection method based on the generative adversarial network.The confrontation network consists of generator network and discriminator network,generator network is composed of U-net network and discriminator network is composed of five-layer convolution network.In this paper,we use BSDS500 training data set to train the model.Finally,several images are randomly selected from BSDS500 test set to compare with the results of traditional edge detection algorithm and HED algorithm.The results of BSDS500 benchmark test show that the ODS and OIS indices of the proposed method are 0.779 and 0.782 respectively,which are much higher than those of traditional edge detection algorithms,and the indices of HED algorithm using non-maximum suppression are similar.

Spoofing Face Detection Using Novel Edge-Net Autoencoder for Security

Recent security applications in mobile technologies and computer sys-tems use face recognition for high-end security.Despite numerous security tech-niques,face recognition is considered a high-security control.Developers fuse and carry out face identification as an access authority into these applications.Still,face identification authentication is sensitive to attacks with a 2-D photo image or captured video to access the system as an authorized user.In the existing spoofing detection algorithm,there was some loss in the recreation of images.This research proposes an unobtrusive technique to detect face spoofing attacks that apply a single frame of the sequenced set of frames to overcome the above-said problems.This research offers a novel Edge-Net autoencoder to select convoluted and dominant features of the input diffused structure.First,this pro-posed method is tested with the Cross-ethnicity Face Anti-spoofing(CASIA),Fetal alcohol spectrum disorders(FASD)dataset.This database has three models of attacks:distorted photographs in printed form,photographs with removed eyes portion,and video attacks.The images are taken with three different quality cameras:low,average,and high-quality real and spoofed images.An extensive experimental study was performed with CASIA-FASD,3 Diagnostic Machine Aid-Digital(DMAD)dataset that proved higher results when compared to existing algorithms.

FILTERING OF MEDICAL ULTRASONIC IMAGES BASED ON A MODIFIED ANISTROPIC DIFFUSION EQUATION

Speckle noise reduction is a key problem of the image analysis of medical UltraSound images. In this paper, two important improvements have been developed to a fast anisotropic diffusion algorithm for speckle noise reduction. The Gaussian filter is firstly used before gradient calculation, and then the adaptive algorithm of the factor k is proposed. Numerous experimental results show that the proposed model is superior to other methods in noise removal, fidelity and edge preservation. It is suitable for the preprocessing of a great number of medical UltraSound images, such as three dimen- sional reconstruction.

Intelligent Identification of Remnant Ridge Edges in Region West of Yongxing Island,South China Sea

Edge detection enables identification of geomorphologic unit boundaries and thus assists with geomorphical mapping. In this paper, an intelligent edge identification method is proposed and image processing techniques are applied to multi-beam bathymetry data. To accomplish this, a color image is generated by the bathymetry, and a weighted method is used to convert the color image to a gray image. As the quality of the image has a significant influence on edge detection, different filter methods are applied to the gray image for de-noising. The peak signal-to-noise ratio and mean square error are calculated to evaluate which filter method is most appropriate for depth image filtering and the edge is subsequently detected using an image binarization method. Traditional image binarization methods cannot manage the complicated uneven seafloor, and therefore a binarization method is proposed that is based on the difference between image pixel values; the appropriate threshold for image binarization is estimated according to the probability distribution of pixel value differences between two adjacent pixels in horizontal and vertical directions, respectively. Finally, an eight-neighborhood frame is adopted to thin the binary image, connect the intermittent edge, and implement contour extraction. Experimental results show that the method described here can recognize the main boundaries of geomorphologic units. In addition, the proposed automatic edge identification method avoids use of subjective judgment, and reduces time and labor costs.

A NEW EDGE DETECTOR WITH THINNING AND NOISE RESISTING ABILITIES

This paper presents a new edge detector using 5 ~ 5 mask, which can reduce noise efficientlybut not increase the width of the detected edge which always happens in the case of using the 5×5 windowedge detector. Besides, in order to handle the problem that the contrast decreases in the dark regioncaused by underexposure, this detector uses a self-adjusting threshold, so that it can detect the edge in re-gions of different grey background correctly.