Effect Mechanisms of Hygrothermal Environments on Failure of Single-Lap and Double-Lap CFRP-Aluminum Bolted Joints

The high demands for load-carrying capability and structural efficiency of composite-metal bolted joints trigger in-depth investigations on failure mechanisms of the joints in hygrothermal environments.However,few studies have been presented to exhaustively reveal hygrothermal effects on the failure of CFRP-metal bolted joints,which differ from CFRP-CFRP or metal-metal bolted joints because of the remarkably different material properties of CFRPs and metals.In this paper,hygrothermal effects on tensile failures of single-lap and double-lap CFRP-aluminum bolted joints were experimentally and numerically investigated.A novel numerical model,in which a hygrothermal-included progressive damage model of composites was established and elastic-plastic models of metals were built,was proposed to predict the failures of the CFRP-metal bolted joints in hygrothermal environments and validated by corresponding experiments.Different failure mechanisms of single-lap and double-lap CFRP-aluminum bolted joints,under 23°C/Dry and 70°C/Wet conditions,were revealed,respectively.It follows that both the collapse failures of the single-lap and double-lap bolted joints were dominated by the bearing failure of the CFRP hole laminate in the two conditions,indicating that the hygrothermal environment did not change the macro failure modes of the joints.However,the hygrothermal environment considerably shortened the damage propagation processes and reduced the strength of the joints.Besides,the hygrothermal environment weakened the load-transfer capability of the single-lap joint more severely than the double-lap joint because it aggravated the secondary bending effects of the single-lap joint obviously.

Effect of the Gut Microbiota on Obesity and Its Underlying Mechanisms: an Update

Obesity has become one of the most prevalent health issues of our time. According to a 2012 WHO report, around 3.4 million adults die each year as a result of being overweight or obese. Humans are in fact superorganisms composed of both human and microbial cells with 2 sets of genes, those encoded in our own genome and those encoded in our microbiota. All these cells and genes have the potential to influence our health.

Exploring the mechanism of active ingredients of Smilacis Glabrae Rhizoma in treating migraine headache through network pharmacology and animal experiments

Background:To explore the potential mechanism of action of the active ingredients of Smilacis Glabrae Rhizoma(SGR)in the treatment of migraine using network pharmacology and in vivo experiments.Methods:Through the search of Traditional Chinese Medicines Systems Pharmacology Database and Analysis Platform,Genecards,Drugbank and other databases,we obtained active ingredients,targets of SGR and related disease targets of migraine,and took the intersection for protein-protein interactions analysis.After constructing the network diagram,network topology analysis was performed to derive the core targets and key active ingredients,and Gene Ontology enrichment and Kyoto Encyclopedia of Genes and Genomes enrichment analyses were performed.Finally,molecular docking was performed and validated by in vivo experiments.In vivo experiments,18 male BALB/c mice were selected,and the SGR group was fed with SGR drinking tablet concentrate,and nitroglycerin injection was used to construct a mouse model of migraine.Enzyme-linked immunosorbent assay test was used to detect the levels of TNF-α,IL-1β,IL-6,and AKT1 in plasma.Results:The results showed that the core targets of SGR for the treatment of migraine were TNF-α,IL-1β,IL-6,and AKT1.These core targets and key active ingredients had better binding ability.Compared with the blank group,the number of head scratching in the model group increased.Compared with the model group,there was a significant reduction of the number of head scratching in the SGR group.In comparison with the blank group,the protein level in the plasma in the model group was markedly higher.Compared with the model group,the protein level in the SGR group was significantly lower.Conclusion:SGR has the characteristics of improving migraine based on multi-targets,multi-components and multi-pathways,and the mechanism of action may be related to the inhibition of the release of inflammatory factors,neuron protection,and interference with apoptosis and other processes.

Effects of signal regulatory proteinα1 on proliferation of hepatocellular carcinoma: a preliminary study

BACKGROUND: Signal regulatory protein alpha1 (Sirpα1) is a negative regulatory factor, and inhibits receptor tyro- sine kinase-dependent cell proliferating signal. This study was undertaken to observe the effect of signal regulatory proteinα1 ( Sirpα1) on gankyrin, cyclin D1, CDK4 and Fas expression in Sk-hep1 mouse hepatoma carcinoma cell line. METHODS: BOSC 23 packed cells were respectively trans- fected by means of recombinated retrovirus including pLX- SN, pLXSN-Sirpα1 and pLXSN-Sirpα1Δ4Y2 with lipofec- tin, and various plasmid virus media (viral titer 2.1 × 106 CFU/ml) were collected and infected respectively in 80% confluent Sk-hepl cells. Transfected Sk-hep1 cells were se- lectively screened with G418 (1200 μg/ml), and Sk-hep1 cell lines transfected with various plasmids were obtained. The protein expressions of gankyrin, cyclin D1, CDK4 and Fas in various Sk-hep1 lines were determined by Western blotting. Various Sk-hep1 lines were recovered to culture with 10% fetal bovine serum at 12 hours and 24 hours after starving culture with free serum for 72 hours, and cells were collected to determine the percentage of S phase cells of proliferating cycle by flow cytometry. RESULTS: Sirpα1 transfection remarkably downregulated gankyrin and cyclin D1 expression. Sirpα1Δ4Y2 downregu- lation of gankyrin expression was greater than that of Sirpα1(P <0.05), but no significant effect of Sirpα1 and Sirpα1Δ4Y2 on CDK4 and Fas protein expression was ob- served in transfected Sk-hep1 lines (P >0.05). The per- centage of S phase cells significantly decreased in Sk-hep1 cells transfected with Sirpα1 and Sirpα1Δ4Y2 plasmids (vs pLXSN Sk-hep1, P <0.05). The percentage of S phase cells in various Sk-hep1 cells increased when recovering to culture with 10% fetal bovine serum at 12 hours, but the percentage of S phase cells in Sk-hep1 cells transfected with Sirpα1 was the lowest ( vs pLXSN and Sirpα1Δ4Y2 Sk- hepl, P<0.05). The percentage of S phase cells in trans- fected pLSXN Sk-hep1 cells was the largest (vs Sirpα1 and Sirpα1Δ4Y2 Sk-hepl, P <0. 05). There was no significant difference between the transfected Sirpα1 Sk-hepl cells and Sirpα1Δ4Y2 Sk-hep1 cells (P>0.05). CONCLUSIONS: Sirpα1 decreases gankyrin and cyclin D1 expression, and inhibits proliferation of liver carcinoma cells. It may be one of the forms for an Sirpα1 negative regulation of carcinogenesis and development of hepatocel- lular carcinoma.

Influence of air pressure on mechanical effect of laser plasma shock wave

The influence of air pressure on mechanical effect of laser plasma shock wave in a vacuum chamber produced by a Nd：YAG laser has been studied. The laser pulses with pulse width of 10ns and pulse energy of about 320mJ at 1.06μm wavelength is focused on the aluminium target mounted on a ballistic pendulum, and the air pressure in the chamber changes from 2.8 × 10^ 3 to 1.01 × 10^5pa. The experimental results show that the impulse coupling coefficient changes as the air pressure and the distance of the target from focus change. The mechanical effects of the plasma shock wave on the target are analysed at different distances from focus and the air pressure.

Experimental Study on the Effect of Steel-fibre in Concrete Thick Cap

The effect of steel fibre used in concrete was systematically analyzed by model testing of 30 2-pile thick caps of steel-fibre reinforced concrete, in which the model scale was 1：5. The experiment system composed of a loading device, strain measurement system and a data-acquisition system was used, also an electromechanic centigrade scale, a lens and a Y J-25 static resistance strainometer were used.The experimental results show that the volumetric rate of steel fibre and draw ratio have an important influence on its load-bearing capacity. The incorporation of steel fibre can effectively improve the extension and reduce the thickness of the caps.

Effect of Irradiation on Crystallinity and Mechanical Properties of Ultrahigh-Molecular-Weight Polyethylene

Ultrahigh-molecular-weight polyethylene(UtlMWPE) has been irradiated (0-40 Mrad) with a Co^(60) source at room temperature under vacuum. Their crystallinity has been investigated by DSC and SAXS A significant increase of heat of fusion can be seen at low irradiation doses, which is attributed to crystallization caused by chain scission during the process of irradiation. It is also observed that thickness of lamellae changes with irradiation dose. Young's modulus has been improved significantly after irradiation at low doses.

Effect of Surface Texture on Tensile Shear Strength of 1060Al-PET Welding Joints

Joining metal to plastic can lighten weight of products to reduce energy consumption.However,it is difficult to achieve high-strength welding between metal and plastic.To address this problem,the methods of surface texture pretreatment and laser irradiation welding was proposed to achieve the high-strength connection of metal and plastic.In this study,with different parameters of laser power and texture morphology,1060 Al with surface texture treatment was joined to polyethylene terephthalate(PET)by laser irradiation welding from metal side.Study showed that as the laser power increased,the tensile shear strength of joints increased first,and decreased thereafter.Tensile shear tests demonstrated that the mechanical force of joint was strengthened contributed to mechanical anchorage formed by surface texture.The depth-width ratio of the texture grooves affected the tensile shear process of the joint.According to the result of temperature simulation,the existence of texture grooves reduced the heat transfer efficiency,and the heat dissipation at interface was also impeded in course of laser welding.Finally,the maximum tensile strength of 1060Al-PET joint reached 48.4 MPa,which was close to the strength of PET matrix.The bonding mechanism of the 1060Al-PET joints was composed of mechanical bonding and chemical bonding.This study proposes an effective method to join metal to plastic which achieved high-strength connection between metal and plastic.

Effect of corporate social responsibility on creation of added value

In the process of financial management and operation, a firm should not only aim to maximize its shareholders' benefits, but also consider the interests of all stakeholders. Bearing social responsibility to each stakeholder to a certain extent and pursuing harmonious social development are fully consistent with the concept of China's building a harmonious socialist society. Furthermore, added value also reflects the idea of social responsibility Based on the relational contract theory, the paper divides stakeholders into staff and shareholders under relational contracts, creditors, suppliers and consumers under transactional contracts and governments and communities under special contracts. The paper details the effect mechanism of a firm's bearing social responsibilities to each stakeholder on the creation of added value respectively, and considers that corporate social responsibilities should be included in the system for creating added value to theoretically support firm managers to fulfill social responsibilities.

Mechanism on the Effect of Al upon the γ→ε Martensite Transformation in the Fe-Mn Alloys

The structure of the solid solution treated and deformed Fe-25Mn-(0-3.11)Al-0.15C alloys was examined by means of metallograph and X-ray diffraction, which has confirmed that Al restrains the γ→ε transformation in the Fe-Mn alloys. The mechanism on the restraining effect of Al has been discussed on the basis of the efFect of Al upon the stacking fault energy in the Fe-Mn alloys.Aluminium increases thermodynamically the stability of the Fe-Mn austenite and the driving force limit necessitated to be overcome for the γ→ε transformation, because the thermodynamicalcalculation indicates that Al increases the stacking fault energy in the Fe-Mn alloys at 300 K.Al will decrease the number and the size for the ε-martensite nucleus according to the stacking fault mechanism of the ε-martensite nucleation

Effect of Abrasive Concentration on Chemical Mechanical Polishing of Sapphire

Effects of abrasive concentration on material removal rate CMRR） and surtace quality m the chemical mecnamcal polishing （CMP） of light-emitting diode sapphire substrates are investigated. Experimental results show that the MRR increases linearly with the abrasive concentration, while the rms roughness decreases with the increasing abrasive concentration. In addition, the in situ coefficient of friction （COF） is also conducted during the sapphire polishing process. The results present that COF increases sharply with the abrasive concentration up to 20 wt% and then shows a slight decrease from 20wt% to 40wt%. Temperature is a product of the friction force that is proportional to COF, which is an indicator for the mechanism of the sapphire CMP.

Effect of Trace Sc and Zr on the Mechanical Properties and Microstructure of A1 Alloy 2618

An experimental 2618(Al-Cu-Mg-Fe-Ni) alloy added with trace Sc and Zr was prepared by ingot metallurgy (IM) method. The aging behavior of the alloy was studied by Vickers hardness measurement at 200℃ and 300℃. and the tensile properties of alloy specimens were measured at 20℃, 200℃, 250℃ and 300℃. The microstructure was observed by using optical microscope, SEM and TEM. It was found that the addition of Sc and Zr to 2618 alloy resulted in a primary Al_3(Sc,Zr) phase which could refine the grain because it acts as nuclei of heterogeneous crystallization in the melt during solidification. The secondary Al_3(Sc,Zr) particles were full coherent with matrix and had obvious precipitation hardening effect. They also made the S' phase precipitate more homogeneous. So the strength of alloy increases at both ambient and elevated temperatures without a decrease of ductility. The ductile fracture of alloy occurs by microvoid nucleation, growth and coalescence, so the microvoid coalescence is the dominant fracture mechanism.

Protective Effects of Ginsenoside Rb1 on Septic Rats and Its Mechanism

This study aims to observe the protective effects of ginsenoside Rbl on liver and lung in rats with septic shock and reveal its mechanism. Rats were randomly divided into three groups： sham, cecal ligation and puncture （CLP）, and CLP with ginsenoside Rb1. Then, the survival rate, arterial blood pressure, TLR4 mRNA, and TNF-α levels were determined. The liver and lung tissues were stained with hematoxylin-eosin （HE）. The overall survival rate of the Rb1 group was significantly higher than that of the CLP group. Mean arterial blood pressure went down in both the CLP and Rb1 groups after CLP, and there was a significant difference both in the sham and Rb1 groups when compared with the CLP group. The Rb1 treatment group had markedly lower TLR4 mRNA expression and TNF-a levels than the CLP group. In the CLP group, pathology showed swelling, degeneration, necrosis, and neutrophii infiltration in the liver and alveolar epithelial cells. However, in the Rb1 group, there was mild degeneration and slight neutrophil infiltration, but no obvious necrosis. Rb1 may improve the survival rate, ameliorate arterial blood pressure, and protect the liver and lung in septic shock rats by downregulating the expression of TLR4 mRNA and inhibiting the production of TNF-α.

Effects of Rare Earths on Properties and Microstructure of Automotive Friction Materials

Rare earth compounds as modifiers used widely in modern friction materials can enhance the interfacial binding of constituents of materials and improve the comprehensive properties of materials evidently. However, there are still few reports on application of rare earth in automotive friction materials. In order to study the effect mechanism of rare earths in friction materials, a rare earth compound was selected as additive and the effects of materials doped with or without rare earth on friction and wear properties of materials were studied. The microstructure and worn surface morphology were observed by scanning electron microscopy and the macro performance was discussed. Worn surface element constitution of materials was analyzed by energy dispersive spectroscopy. Effect mechanism of rare earths on friction and wear behaviors of friction materials were discussed. The results show that doping rare earths in friction materials can stabilize friction coefficient, lower the wear rate of materials and increase the impact strength of materials. The flexibility and fracture resistance of materials is greatly improved. Worn surface of materials doped with rare earth is compact and the surface adhesion is greatly enhanced.

THE EFFECT OF POLYMER IN STEEL FIBER REINFORCED CEMENT COMPOSITES

Three kinds of polymers, polymethyl acrylate emulsion (POLYVINYLformal solution (PV- FO), styrene acrylate copolymer emulsion (SA)are chosen To study the effect of polymer in steel fiber rein forcedce- Ment composites (SFRCC). The experimental results show That thebonding properties in SFRCC are remarkably im- Proved after theaddition of three kinds of polymer.

MULTIPLE SCATTERING THEORY OF EFFECTIVE MECHANICAL PROPERTIES OF INHOMOGENEOUS MEDIA

The rate of hydrothermal reaction of SiO_2 and/or A1_2O_3 in the system of CaO-Al_2O_3-SiO_2-H_2O at 200℃ and the factors which influence the reactions are investigated by determining the reaction ratio.The rate of reactions depends on the reactive activities of raw materials, initial composition of mixture and relative activity of SiO_2 and A12O3. The hydrothermal reaction can be accelerated by sodium hydroxide,in the case of silica,which has low activity, this is quite obvious.

Mechanical effects of light on the ■-type three-level atom in a high-finesse optical cavity

A theoretical study is carried out for the modification and implication of the effect on the type three level atom in a high-finesse optical cavity driven by light field including spontaneous emission and the cavity decay. Analytic expressions for the dipole force, the friction force, the optical potentials and the friction coefficient are obtained. Then the numerical and graphical methods are used to investigate the friction coefficient with the controlling parameters. It is shown that the friction coefficient is strongly dependent on the controlling parameters. The cooling rate can increase by one order of magnitude more than that of a two-level atomic system. The reason can be given using the dressed states and the Sisyphus cooling mechanism, which would stimulate further experimental investigations.

An empirical study on the green effects of new energy vehicle promotion in the context of global carbon neutrality

In the context of global carbon neutrality,new energy vehicle promotion(NEVP)has become an important means of reducing carbon emissions.This paper constructs a theoretical model and uses panel data on NEVP in 21 countries from 2012 to 2018 to empirically examine the green effect of NEVP.The results indicate the following:(1)NEVP significantly reduces greenhouse gases emissions,and the green effect can be transmitted and diffused through a direct path.(2)Replacing fuel-fired vehicles and accelerating the end-of-life vehicle scrapping process significantly conducted the green effect,and aggravating traffic congestion was not statistically significant.(3)The transmission mechanism of the green effect is regulated by regional economic heterogeneity.In regions with better development of fuel-fired vehicles,the transmission of the green effect is subject to the elimination of fuel-fired vehicles and traffic congestion governance,and the transmission efficiency is low.However,regions with a relatively weak fuel-fired automobile industry foundation show a strong“advantage of backwardness”,and the green effect is more prominent.This means that global NEVP should be further accelerated to achieve the green effect and the goal of global carbon neutrality.

Conductive Polymer Composites Fabricated by Disposable Face Masks and Multi-Walled Carbon Nanotubes: Crystalline Structure and Enhancement Effect

Influenced by recent COVID-19,wearing face masks to block the spread of the epidemic has become the simplest and most effective way.However,after the people wear masks,thousands of tons of medical waste by used dis-posable masks will be generated every day in the world,causing great pressure on the environment.Herein,con-ductive polymer composites are fabricated by simple melt blending of mask fragments(mask polypropylene,short for mPP)and multi-walled carbon nanotubes(MWNTs).MWNTs were used as modifiers for composites because of their high strength and high conductivity.The crystalline structure,mechanical,electrical and thermal enhancement effect of the composites were investigated.MWNTs with high thermal stability acted the role of promoting the crystallisation of mPP by expediting the crystalline nucleation,leading to the improvement of amount for crystalline nucleus.MWNTs fibers interpenetrate with each other in mPP matrix to form conducting network.With 2.0 wt% MWNTs loading,the tensile strength and electrical conductivity of the composites were increased by 809% and 7 orders of magnitude.MWNTs fibers interpenetrate with each other in mPP matrix to form conducting network.Thus,more conducting paths were constructed to transport carriers.The findings may open a way for high value utilization of the disposable masks.