Analysis of the Effect of Humanistic Care in the Process of Pre-Hospital Emergency Care

Objective:To explore the effectiveness of humanistic care in pre-hospital emergency care.Methods:From April 2020 to January 2021,80 pre-hospital emergency patients were studied.The patients were randomly divided into two groups:a control group(n=40),which received conventional care,and an experimental group(n=40),which received humanistic care.The effects of nursing care and psychological state were compared between the two groups.Results:The experimental group showed better nursing outcomes and a more positive psychological state compared to the control group(P<0.05).Conclusion:Humanistic care in pre-hospital emergency settings is more effective in reducing patients’anxiety and depression,enhancing the operational abilities and service attitudes of nursing staff,and increasing the emergency success rate.

Molecular Tagging and Effect Analysis of a New Small Grain Dwarf Gene in Rice

Plant height is one of the important agronomic traits of rice. Over higher plant would easily result in plant lodging and output reducing. On the other hand, the dwarf varieties with proper plant height had higher lodging resistance and a greater harvest index, allowing for the increased use of nitrogen fertilizer. Dwarf breeding had made a great breakthrough in the rice breeding. The breeding and extension of excellent dwarf varieties remarkably improved the yield potential of rice. Therefore, the plant height is still one of the focuses in rice genetic research.

Wind-Vortex-Induced Vibrations of a Deepwater Jacket Pipe and Vibration Suppression Using a Nonlinear Energy Sink

The purpose of this study is to investigate the suppression effect of a nonlinear energy sink(NES)on the wind-vortex-induced pipe vibration and explore the influence of damping,stiffness,and NES installation position on the suppression effect.In this work,the wind-vortex-induced vibration of an elastic pipe of a deepwater jacket was studied,and vibrations were suppressed by using an NES.A van der Pol wake oscillator was used to simulate vortex-induced force,and the dynamic equation of the pipe considering the NES was established.The Galerkin method was applied to discretize the motion equation,and the vortex-induced vibration(VIV)of the pipe at reduced wind speeds was numerically analyzed.The novelty of this research is that particle swarm optimization was used to optimize the parameters of the NES to improve vibration suppression.The influence of the installation position,nonlinear stiffness,and damping parameters of the NES on vibration suppression was analyzed.Results showed that the optimized parameter combinations of the NES can effectively reduce wind-vortex-induced pipe vibration.The installation position of the NES had a significant effect on vibration suppression,and the midpoint of the pipe was the optimal NES installation position.An increase in stiffness or a 10% decrease in damping may cause vibration suppression failure.The results of this study provide some guidance for VIV suppression in deepwater jacket pipes.

Multi-stage attack weapon target allocation method based on defense area analysis

For better reflecting the interactive defense between targets in practical combat scenarios,the basic weapon-target allocation(WTA)framework needs to be improved.A multi-stage attack WTA method is proposed.First,a defense area analysis is presented according to the targets’positions and the radii of the defense areas to analyze the interactive coverage and protection between targets’defense areas.Second,with the coverage status and coverage layer number,a multi-stage attack planning method is proposed and the multi-stage attack objective function model is established.Simulation is conducted with interactive defense combat scenarios,the traditional WTA method and the multi-stage WTA method are compared,and the objective function model is validated with the Monte-Carlo method.The results suggest that if the combat scenario involves interactive coverage of targets’defense areas,it is imperative to analyze the defense areas and apply the multi-stage attack method to weakening the target defense progressively for better combat effectiveness.

Land use change and effect analysis of tideland reclamation in Hangzhou Bay

Since the beginning of the 20th century, tideland reclamation as a huge project has continuously extended from inland to the sea for the socioeconomic development, like Zhejiang, Jiangsu and other coastal regions in China. The increase of land area alleviated the contradiction of supply and demand between human and land, which provided the guarantee for agricultural production and industrial development. However, marine ecological environment has been seriously damaged due to the increasing scale of tideland reclamation. This paper took the Hangzhou Bay in the Yangtze River Delta as a study area to explore the evolution law, socioeconomic effect and eco-environmental effect of reclaimed land from 1985 to 2015. The result showed that as follows:(1) The area of tideland reclamation was 460.67 km^2 with 16.57% cultivated land and 15.93% construction land, and its land use was inefficient;(2) Land use change has spatial and temporal difference, the speed of tideland reclamation had been increasing from 1985 to 2015 in time and the scale of reclaimed land in the southern(84.07%) of Hangzhou Bay was larger than the northern region(15.93%) in space;(3) The evolution law of land use was from tideland to swampland and coastal waters to agricultural facility land, to cultivated land to industrial-mining land to idle land, rural-urban construction land, and formed obviously hierarchical structure;(4) Effect analysis of land use change found that the socio-economic effect had increased but the eco-environmental effect had decreased from 1985 to 2015, it reflected socio-economic effect was acquired through sacrificing eco-environmental effect;(5) It pointed out the existing problems on land extensive inefficient, environmental degradation and economy excessive growth without scientific planning, and offered some suggestions in land comprehensive improvement project, industrial transformation and upgrading and scientific planning and legal safeguardto promote sustainable development in the Hangzhou Bay in the new period.

Impact of failure mode and effects analysis-based emergency management on the effectiveness of craniocerebral injury treatment

BACKGROUND Craniocerebral injuries encompass brain injuries,skull fractures,cranial soft tissue injuries,and similar injuries.Recently,the incidence of craniocerebral injuries has increased dramatically due to the increased numbers of traffic accidents and aerial work injuries,threatening the physical and mental health of patients.AIM To investigate the impact of failure modes and effects analysis(FMEA)-based emergency management on craniocerebral injury treatment effectiveness.METHODS Eighty-four patients with craniocerebral injuries,treated at our hospital from November 2019 to March 2021,were selected and assigned,using the random number table method,to study(n=42)and control(n=42)groups.Patients in the control group received conventional management while those in the study group received FMEA theory-based emergency management,based on the control group.Pre-and post-interventions,details regarding the emergency situation;levels of inflammatory stress indicators[Interleukin-6(IL-6),C-reactive protein(CRP),and procalcitonin(PCT)];incidence of complications;prognoses;and satisfaction regarding patient care were evaluated for both groups.RESULTS For the study group,the assessed parameters[pre-hospital emergency response time(9.13±2.37 min),time to receive a consultation(2.39±0.44 min),time needed to report imaging findings(1.15±4.44 min),and test reporting time(32.19±6.23 min)]were shorter than those for the control group(12.78±4.06 min,3.58±0.71 min,33.49±5.51 min,50.41±11.45 min,respectively;P<0.05).Pre-intervention serum levels of IL-6(78.71±27.59 pg/mL),CRP(19.80±6.77 mg/L),and PCT(3.66±1.82 ng/mL)in the study group patients were not significantly different from those in the control group patients(81.31±32.11 pg/mL,21.29±8.02 mg/L,and 3.95±2.11 ng/mL respectively;P>0.05);post-intervention serum indicator levels were lower in both groups than pre-intervention levels.Further,serum levels of IL-6(17.35±5.33 pg/mL),CRP(2.27±0.56 mg/L),and PCT(0.22±0.07 ng/mL)were lower in the study group than in the control group(30.15±12.38 pg/mL,3.13±0.77 mg/L,0.38±0.12 ng/mL,respectively;P<0.05).The complication rate observed in the study group(9.52%)was lower than that in the control group(26.19%,P<0.05).The prognoses for the study group patients were better than those for the control patients(P<0.05).Patient care satisfaction was higher in the study group(95.24%)than in the control group(78.57%,P<0.05).CONCLUSION FMEA-based craniocerebral injury management effectively shortens the time spent on emergency care,reduces inflammatory stress and complication risk levels,and helps improve patient prognoses,while achieving high patient care satisfaction levels.

Comprehensive Reliability Allocation Method for CNC Lathes Based on Cubic Transformed Functions of Failure Mode and Effects Analysis

Reliability allocation of computerized numerical controlled（CNC）lathes is very important in industry.Traditional allocation methods only focus on high-failure rate components rather than moderate failure rate components,which is not applicable in some conditions.Aiming at solving the problem of CNC lathes reliability allocating,a comprehensive reliability allocation method based on cubic transformed functions of failure modes and effects analysis（FMEA）is presented.Firstly,conventional reliability allocation methods are introduced.Then the limitations of direct combination of comprehensive allocation method with the exponential transformed FMEA method are investigated.Subsequently,a cubic transformed function is established in order to overcome these limitations.Properties of the new transformed functions are discussed by considering the failure severity and the failure occurrence.Designers can choose appropriate transform amplitudes according to their requirements.Finally,a CNC lathe and a spindle system are used as an example to verify the new allocation method.Seven criteria are considered to compare the results of the new method with traditional methods.The allocation results indicate that the new method is more flexible than traditional methods.By employing the new cubic transformed function,the method covers a wider range of problems in CNC reliability allocation without losing the advantages of traditional methods.

The Synthetic Effect of Magnetorheological Finishing Technology:Analysis,Modeling,and Control

The controllable key factors in magnetorheological finishing device were studied to determine their influence on efficiency of magnetorheological finishing(MRF)and surface of MRF,as well as interaction between efficiency and surface.Based on theoretical and experimental research,the law of material removal was explored and a new process variable based material removal model(PVMR)was proposed.The experimental findings demonstrate that PVMR reveals the law of the material removal with introduction of three concepts and makes a material removal function z(y i)where the magnetorheological finishing process parameters are considered since they are easy to control and adjust.So the material function of this model is quadratic curve function which is readily suitable for stability and online control magnetorheological finishing.

Numerical Analysis of Magnetic-Shielding Effectiveness for Magnetic Resonant Wireless Power Transfer System

Magnetic radiation phenomena appear inevitably in the magnetic-resonance wireless power transfer （MR-WPT） system, and regarding this problem the magnetic-shielding scheme is applied to improve the electromagnetic performance in engineering. In this study, the shielding effectiveness of a two-coil MR-WPT system for different material shields is analyzed in theory using Moser＇s formula and Schelkunoff＇s formula. On this basis a candidate magnetic-shielding scheme with a double-layer structure is determined, which has better shielding effectiveness and coils coupling coefficient. Finally, some finite element simulation results validate the correctness of the theoretical analysis, and the shielding effectiveness with the double-layer shield in maximum is 30？dB larger than the one with the single-layer case.

System failure analysis based on DEMATEL–ISM and FMECA

A new method of system failure analysis was proposed. First, considering the relationships between the failure subsystems,the decision making trial and evaluation laboratory(DEMATEL) method was used to calculate the degree of correlation between the failure subsystems, analyze the combined effect of related failures, and obtain the degree of correlation by using the directed graph and matrix operations. Then, the interpretative structural modeling(ISM) method was combined to intuitively show the logical relationship of many failure subsystems and their influences on each other by using multilevel hierarchical structure model and obtaining the critical subsystems. Finally, failure mode effects and criticality analysis(FMECA) was used to perform a qualitative hazard analysis of critical subsystems, determine the critical failure mode, and clarify the direction of reliability improvement.Through an example, the result demonstrates that the proposed method can be efficiently applied to system failure analysis problems.

Application of Fuzzy Decision-Making Theory and Conflict-Resolution Method to Failure Mode and Effect Analysis of Industrial Valve

It is not objective to rate the decision-making factors in the traditional failure mode and effect analysis,so fuzzy semantic theory is used in this paper.Six fuzzy semantic scales and their corresponding semantics are summarized,and a defuzzification method is studied to obtain the fuzzy value table of the six fuzzy semantic scales.For the conflicts between experts in the traditional failure mode and effects analysis,a conflict-resolution algorithm is studied to obtain the failure risk order.Finally,a certain type of industrial valve is used as an example to prove the validity of the theory proposed in this paper.

Risk Evaluation in Blood Donation Using Failure Mode and Effective Analysis

The recognition and management of risk in donation process and blood product is critical to ensure donor and patient safety. To achieve this goal, the failure mode and effects analysis (FMEA) is a convenient method;moreover it was used to prevent the occurrence of adverse events and look at what could go strong at each step. This study aimed to utilize FMEA in central blood bank in Khartoum to evaluate the potential risk and adverse event that may occur during the donation process. According to the severity, occurrence and the detection of each failure mode, the risk priority number (RPN) was calculated to determine which of the failures should take priority to find a solution and applying corrective action to reduce the failure risk. The statistical package for social sciences (SPSS) version 11 was used as descriptive and analytical statistics tool. The FMEA technique provides a systematic method for finding vulnerabilities in a process before they result in an error, and in this study a satisfactory outcome was reached.

Effect of Healthcare Failure Mode and Effect Analysis on Reducing Error Risk of Neonatal Parenteral Nutrition Solution Dispensing

[Objectives]To investigate the effect of healthcare failure mode and effect analysis(HFMEA)on reducing error risk of neonatal parenteral nutrition solution dispensing.[Methods]A research team was established to identify the failure mode(FM)in each link of the formulation process of neonatal parenteral nutrition solution by HFMEA,quantify the severity(S),occurrence(O)and detection(D)of FM,and evaluate FM by risk priority number(RPN).For FM with the values of RPN>16,failure cause analysis was conducted,and corresponding improvement measures were formulated.The weight coefficient and random consistency ratio(CR)of deployment process were calculated in Matlab R2018a by compiling the Analytic Hierarchy Process(AHP)program.Six months after the implementation of improvement measures,the implementation effect was evaluated by comparing the changes of the values of RPN which was evaluated comprehensively and the rate of dispensing errors before and after the implementation of HFMEA.[Results]In the preparation process of neonatal parenteral nutrition solution,a total of 13 FMs with medium and above risk were found,the weight coefficient of medical order review,dosing and mixing was 0.2703,the weight coefficient of drug dispensing check and review was 0.1432,the weight coefficient of print label was 0.1015,the weight coefficient of distribution was 0.0716,and CR=0.0491<0.1.After six months of intervention,the total RPN value decreased by 64.81%from 127.8 to 45.0.The deployment error rates were significantly lower after the implementation,and the difference was statistically significant(P<0.05).[Conclusions]HFMEA can effectively reduce the error risk in preparation of neonatal parenteral nutrition solution,improve the quality of dispensing and promote the safety of neonatal medication.

Analysis of genetic effects and correlations for nutrient quality traits of indica rice in different environments

Understanding the variation for the expressionof genes in different environments is one of themajor goals in qualitative genetics. In this pa-per, the genetic models for quantitative traitsof endosperm in cereal crops were used to eval-uate the seed, cytoplasm and maternal geneticeffects as well as the genotype × environment(GE) interaction effects, and to predict thebreeding value of parents and genotypic corre-lation for nutrient quality traits of indica rice (Oryza sativa L.).

Effects Analysis of Mg^2＋, dNTPs and Taq DNA Polymerase on SSR-PCR System of Pear

Effects of Mg^2＋, NTPs and Taq DNA polymerase in pear SSR-PCR system were analyzed by quadratic regressive orthogonal rotational combinational design. Results showed： absolute IOD （Integrated OD of each band） value of target band reduced with concentration rising of Mg^2＋ and Taq DNA polymerase, but heightened with concentration rising of dNTPs. The decay rate of absolute IOD value increased progressively with rising Mg^2＋ concentration, decreased gradually with rising Taq DNA polymerase concentration; the rising speed would be slower than the dNTPs increase. Absolute IOD value would reduce with concentration rising of dNTPs at a low level of Mg^2＋ concentration. Conversely it would rise with the increase of dNTPs while high Mg^2＋ concentration. Absolute IOD value would generally rise with concentration rising of Taq DNA polymerase while low Mg^2＋ concentration. On the contrary it would reduce with concentration rising of Taq DNA polymerase while high Mg^2＋ concentration.

Analysis of Effect of Zn(O,S) Buffer Layer Properties on CZTS Solar Cell Performance Using AMPS

The Cu2ZnSnS4 （CZTS）-based solar cell is numerically simulated by a one-dimensional solar cell simulation soft- ware analysis of microelectronic and photonic structures （AMPS-1D）. The device structure used in the simulation is Al/ZnO：Al/nZn（O,S）/pCZTS/Mo. The primary motivation of this simulation work is to optimize the composition in the ZnO1-xSx buffer layer, which would yield higher conversion efficiency. By varying S/（S＋O） ratio x, the conduction band offset （CBO） at CZTS/Zn（O,S） interface can range from -0.23 eV to 1.06eV if the full range of the ratio is considered. The optimal CBO of 0.23eV can be achieved when the ZnO1-xSx buffer has an S/（S＋O） ratio of 0.6. The solar cell efficiency first increases with increasing sulfur content and then decreases abruptly for x〉 0.6, which reaches the highest value of 17.55% by our proposed optimal sulfur content x= 0.6. Our results provide guidance in dealing with the ZnO1-xSx buffer layer deposition for high efficiency CZTS solar cells.

Failure Mode Effects and Criticality Analysis Method of Armored Equipment Based on Testability Growth

In view of the low level testability of armored equipment,the important significance of armored equipment testability growth is discussed in this paper.The failure mode effects and criticality analysis( FMECA) method to realize testability growth is introduced.Centering on the testability growth demands of new armored equipment,the deficiencies of traditional FMECA are analyzed.And an enhanced FMECA( EFMECA) method is proposed.The method increases the analysis contents,combines the information before the failure occurrence and impending failure modes together organically.Then the failure symptoms is analyzed,the failure modes and effects is determined,and the state development trend is predicted.Finally,the application of EFMECA method is illustrated by the example of the failure mode of typical armored equipment engine.

Analysis on the Effect of Beijing＇s Traffic Control Policies

With the rapid development of economy and motorization, the traffic congestion and environmental problems have become more and more serious day by day in Beijing. Therefore, traffic control policies have been gradually adopted by Beijing municipal government since 2008, so as to ease traffic and environmental problems. In this paper, the background and current situation of Beijing to implement traffic control policies are introduced, and also this measure is analyzed and evaluated from traffic effect, environmental effect, motor vehicle development, urban road development, public transport development, and balance between supply and demand, etc. Finally, related conclusions are drawn up as follows： an induced traffic volume will be generated by traffic control policies, and the effect of the traffic control will be erased by the natural growth rate of motor vehicles in three years; public traffic service should be improved for better making traffic control policies; the traffic congestion and environmental problems are alleviated by traffic control policies in the short term, but can＇t be fundamentally solved in the long run; traffic control policies should cooperate with other traffic demand management policies for reducing demands, and traffic condition should be optimized in both time and space, so that the traffic congestion and environmental problems will be fundamentally solved.

An Empirical Study of Downstream Analysis Effects of Model Pre-Processing Choices

This study uses an empirical analysis to quantify the downstream analysis effects of data pre-processing choices. Bootstrap data simulation is used to measure the bias-variance decomposition of an empirical risk function, mean square error (MSE). Results of the risk function decomposition are used to measure the effects of model development choices on model bias, variance, and irreducible error. Measurements of bias and variance are then applied as diagnostic procedures for model pre-processing and development. Best performing model-normalization-data structure combinations were found to illustrate the downstream analysis effects of these model development choices. In additions, results found from simulations were verified and expanded to include additional data characteristics (imbalanced, sparse) by testing on benchmark datasets available from the UCI Machine Learning Library. Normalization results on benchmark data were consistent with those found using simulations, while also illustrating that more complex and/or non-linear models provide better performance on datasets with additional complexities. Finally, applying the findings from simulation experiments to previously tested applications led to equivalent or improved results with less model development overhead and processing time.

NUMERICAL-PERTURBATION ANALYSIS OF EDGE EFFECT IN BENDING LAMINATED PLATE

In this paper, we consider a bending laminated plate. At first, the dimensionless variables are used to transform the equilibrium equations of any layer to perturbation differential equations. Secondly, the composite expansion is used and the solution domain is divided into interior and boundary layer regions and the mathematical models for the outer solution and the inner solution are yielded respectively. Then, the inner solution is expressed with the boundary intergral equation.