Effect of Size and Initial Water Content on the Effective Diffusion Coefficient during Convective Drying of Sweet Potato Cut into Cubic and Cylindrical Shapes

In this article, we investigated the influence of size and initial water content on the effective diffusion coefficient of sweet potatoes samples cut into cubic and cylindrical shapes. The sizes of the cubic samples are 0.5, 1, 1.5, 1.75, 2, 2.5 and 3 cm edge with a respective initial water content of 2.7, 3.76, 3.48, 2.68, 3.28, 2.17 and 2.29 kg/kgms. For cylindrical samples, the radius is set at 0.5 cm and sample heights are 1, 1.5, 2, 2.5, 3, 3.5 and 4 cm with respective water contents of 2.2, 3.19, 2.85, 2.1, 2.17, 2.39 and 2.03 kg/kgms. The effective diffusion coefficients of cubic samples are of the order of 10−10 and 10−9 m2∙s−1 grew with sample edge. As for the cylindrical samples, the effective diffusion coefficients were of the order of 10−9 m2∙s−1 and there was no linear correlation between cylinder height and their effective diffusion coefficient. As for the examination of the initial water content on the effective diffusion coefficient, it turned out that the initial water content had no influence on the effective diffusion coefficient of the sweet potato samples.

Prediction of Effective Diffusion Coefficient in Rotating Disc Columns and Application in Design

A rotating disc column (RDC) with inner diameter 68 mm and 28 compartments is used in this study. Parameters including Sauter mean diameter, hold-up and mass transfer coefficient are measured experimentally un-der different operating conditions. The correlations in literature for molecular diffusion and enhancement factor equation including eddy diffusion, circulation and oscillation of drops are evaluated. A new equation for the effec-tive diffusion coefficient as a function of Reynolds number is proposed. The calculated values of mass transfer co-efficient and column height from the previous equations and present equation are compared with the experimental data. The results from the present equation are in very good agreement with the experimental results, which may be used in designing RDC columns.

Fractal scaling of effective diffusion coefficient of solute in porous media

Fractal approach is used to derive a power law relation between effective diffusion coefficient of solute in porous media and the geometry parameter characterizing the media. The results are consistent with the empirical equations analogous to Archie`s law and are expected to be applied to prediction of effective diffusion coefficient. Key words: diffusion; effective diffusion coefficient; fractal; porous media.

M-T Scheme for Predicting Effective Diffusion Coefficient of Chloride Ions in Cement-based Materials

To investigate the transport characteristics of chloride ions in cement-based materials, the Mori-Tanaka (M-T) prediction scheme of the effective diffusion coefficient in composites containing single-phase and multi-phase inclusions is systematically deduced based on the theory of composite mechanics and porous medium. The volume fraction, morphology and distribution of aggregates, as well as the interfacial transition zone (ITZ) are fully taken into consideration in this proposed model. The results show that the algorithm of M-T prediction scheme with high accuracy is relatively simple.

THEORETICAL EFFECTS OF MOLECULAR DIMENSION AND CONFIGURATION ON EFFECTIVE DIFFUSION COEFFICIENT OF MACROMOLECULES IN MICROPOROUS MEMBRANES

This paper presents a theoretical method for predicting the effective diffusion coefficient of macromolecules in the microporous membrfines in view of the effects of molecular dimension and configuration. On the basis of the hindered diffusion theory of spherical neutral macromolecules in a micropore of a long cylinder, the effects of molecular dimension and configuration are studied by defining two molecular dimensions:the mean projected radius to predict the concentration partition and the ' hydrodynamically equivalent sphere' radius to evaluate the hydrodynamic reverse drag force. The quantitative comparison shows that the effective diffusion coefficients for different macromolecules predicted by the present method are more consistent with the available published experimental data.

Unveiling the Re,Cr,and I diffusion in saturated compacted bentonite using machine-learning methods

The safety assessment of high-level radioactive waste repositories requires a high predictive accuracy for radionuclide diffusion and a comprehensive understanding of the diffusion mechanism.In this study,a through-diffusion method and six machine-learning methods were employed to investigate the diffusion of ReO_(4)^(−),HCrO_(4)^(−),and I−in saturated compacted bentonite under different salinities and compacted dry densities.The machine-learning models were trained using two datasets.One dataset contained six input features and 293 instances obtained from the diffusion database system of the Japan Atomic Energy Agency(JAEA-DDB)and 15 publications.The other dataset,comprising 15,000 pseudo-instances,was produced using a multi-porosity model and contained eight input features.The results indicate that the former dataset yielded a higher predictive accuracy than the latter.Light gradient-boosting exhibited a higher prediction accuracy(R2=0.92)and lower error(MSE=0.01)than the other machine-learning algorithms.In addition,Shapley Additive Explanations,Feature Importance,and Partial Dependence Plot analysis results indicate that the rock capacity factor and compacted dry density had the two most significant effects on predicting the effective diffusion coefficient,thereby offering valuable insights.

Solvent transport dynamics and its effect on evolution of mechanical properties of nitrocellulose(NC)-based propellants under hot-air drying process

Appropriate drying process with optimized controlling of drying parameters plays a vital role in the improvement of the quality and performance of propellant products.However,few research on solvent transport dynamics within NC-based propellants was reported,and its effect on the evolution of mechanical properties was not interpreted yet.This study is conducted to gain a comprehensive understanding of hot-air drying for NC-based propellants and clarify the effect of temperature on solvent transport behavior and further the change of mechanical properties during drying.The drying kinetic curves show the drying time required is decreased but the steady solvent content is increased and the drying rate is obviously increased with the increase of hot-air temperatures,indicating hot-air temperatures have a significant effect on drying kinetics.A modified drying model was established,and results show it is more appropriate to describe solvent transport behavior within NC-based propellants.Moreover,two linear equations were established to exhibit the relationship between solvent content and its effect on the change of tensile properties,and the decrease of residual solvent content causes an obvious increase of tensile strength and tensile modulus of propellant products,indicating its mechanical properties can be partly improved by adjustment of residual solvent content.The outcomes can be used to clarify solvent transport mechanisms and optimize drying process parameters of double-based gun propellants.

Numerical simulation to evaluate gas diffusion of turbulent flow in mine ventilation system

Tracer gas technique is a method to analyze the airflow path, measure the airflow quantity, and detect any recirculation or leakages in underground mine. In addition, it is also possible to evaluate the axial gas diffusion of gas in turbulent bulk flow by utilizing the tracer gas data. This paper discussed about the measurement using tracer gas technique in Cibaliung Underground Mine, Indonesia and the evaluation of effective axial diffusion coefficient, E, by numerical simulation. In addition, a scheme to treat network flow in mine ventilation system was also proposed. The effective axial diffusion coefficient for each airway was evaluated based on Taylor's theoretical equation. It is found that the evaluated diffusion coefficient agrees well with Taylor's equation by considering that the wall friction factor, f, is higher than those for smooth pipe flow. It also shows that the value of effective diffusion coefficient can be inherently determined and the value is constant when matching with other measurements. Furthermore, there are possibilities to utilize the tracer gas measurement data to evaluate the airway friction factors.

Study on microwave-induced thin-layer drying of municipal sludge for fuel reclamation

Since the adverse factors such as deficient penetration and long reaction time have restricted the complete microwave-used drying of municipal sludge, the microwave-induced drying is considered, which has advantages in such aspects. The investigation of the microwave-induced drying to uncover the mechanism bears great meaning for its development and utilization. The effects of temperature and microwave cracking in municipal sewage sludge drying characteristics are stud- ied through municipal sewage sludge drying experiment. Experiments shows that higher drying temperature would lead to a more acutely changing drying rate （DR）. The DR had increased from 0.005 g/（g.min） to 0.060 g/（g·min）, which was 12 times enlarged, while the temperature rose from 70℃ to 160 ℃. The higher the temperature was, the earlier the peak value of DR appeared. The experiments indicated that the temperature was the decisive factor affecting the DR. The microwave-induced sludge reached the highest DR at the moisture rate （MR） of 40%, with a 20% grade promotion compared with that of the original one. The molecular fracture caused by microwave radiation had obviously accelerated the drying process and the DR was rising in proportion to the microwave radiation dose. The diffusion coefficient had been calculated according to Fick＇s law. In com- parison to that of the original one, the diffusion coefficient of microwave-induced sludge was obviously enlarged more than two times. By fit examinations, Model Weibull was proven to be the most fit one for thermal thin-layer drying of municipal sludge. By means of Arrhenius equation, the obtained average activation energy of municipal sludge was 37.1 kJ/（mol·K）.

Characteristics of hot tensile deformation and microstructure evolution of twin-roll cast AZ31B magnesium alloys

High temperature tensile properties and microstructure evolutions of twin-roll-cast AZ31B magnesium alloy were investigated over a strain rate range from 10-3 to 1 s-1.It is suggested that the dominant deformation mechanism in the lower strain rate regimes is dislocation creep controlled by grain boundary diffusion at lower temperature and by lattice diffusion at higher temperatures,respectively.Furthermore,dislocation glide and twinning are dominant deformation mechanisms at higher strain-rate.The processing map,the effective diffusion coefficient and activation energy map of the alloy were established.The relations of microstructure evolutions to the transition temperature of dominant diffusion process,the activation energy platform and the occurrence of the full dynamic recrystallization with the maximum peak efficiency were analyzed.It is revealed that the optimum conditions for thermo-mechanical processing of the alloy are at a temperature range from 553 to 593 K,and a strain rate range from 7×10-3 to 2×10-3 s-1.

Experimental Study of the Water Absorption Kinetics of the Coconut Shells (Nucifera) of Cameroun

The study is focused on the phenomenon of diffusion of water through the shells of two coconut species (coconut nucifera) of Cameroun. The kinetics absorption of water was studied experimentally by the gravimetric method with discontinuous control of the mass of the samples at the temperature of 23℃. The mature coconut shells were cleaned mechanically, cut in a spherical shape and placed in a drying oven with 105℃ for 4 hours before being plunged in distilled water at 23℃. This study made it possible not only to determine the rate of water absorbed, but also to model the water kinetic absorption of the shells. Of the two models tested (Peleg and Page), the Page model predicted very well the experimental data. The Fick law made it possible to evaluate the effective diffusivity coefficients at the initial and final phases of absorption. The effective diffusivity coefficient was given from the Arrhenius equation.

颗粒内传质参数作为工具用于催化剂颗粒的设计(英文)

A chromatographic method and a dynamic Wicke-Kallenbach method (DMWK) were used to determine the diffusion characteristics of two industrial copper containing catalysts. The first catalyst was used in nitrobenzene hydrogenation to aniline and the second was used in a low temperature water-gas shift reaction. Experimental results show that application of these two methods leads to similar results. Experimental data obtained allow for monitoring changes in the texture of the catalyst grains and intraparticle diffusivity of gaseous reagents at different states of the catalyst activity and use, which can be used as criteria for designing optimal industrial catalyst pellets.

Study of Kinetic Characteristics for Drying Rice Husk

Rice husk (biomass fuel) samples have been dried in drying oven and a series of drying curve for illustrating moisture migration of rice husk have been obtained. It is first research for rice husk drying,and it can provide reference of fuel processing for different boilers which require rice husk with various water contents. In this paper,we apply Page equation to reflect the drying process and obtain drying characteristic curve,then analyze the drying law. Kinetic analysis of the results of moisture migration test has been done,after which, effective moisture diffusion coefficient,activation energy and drying kinetic equation of rice husk samples are obtained in test temperature range (80 - 130 ℃) . And these results show specific influence law of temperature for effective moisture diffusion coefficient.

Influence of initial curing conditions and exposure environments on chloride migration in concrete using electrochemical method

To investigate the influence of initial curing conditions and exposure environments on chloride ions’migration in concrete,the specimens that were cured in different conditions and placed in several marine environments were studied.The amount of chloride ions passing through the specimen’s section was monitored in the accelerated chloride migration test.The effective chloride diffusion coefficients(De)were calculated from the steadystate on the basis of Nernst-Planck’s equation.The results indicated that the initial curing conditions and the wet-dry interval of external environments have coupling influence on effective diffusion coefficient of chloride ion significantly.De reflected the density and pore connectivity of concrete.The co-effects of the initial curing condition and following exposure environment should be taken into account in durability design for concrete structure located in marine environment.

Mass transfer between bubbles and the dense phasein gas fluidized beds

Mass transfer between a bubble and the dense phase in gas fluidized beds of Group A and Group B particles was proposed based on previous experimental results and literature data. The mass transfer coefficient between bubbles and the dense phase was determined by kbe = 0.21 db. A theoretical analysis of the mass transfer coefficient between a bubble and the dense phase using diffusion equations showed that the mass transfer coefficient between a bubble and the dense phase is kbe α εmf√ub/db in both three- and two-dimensional fiuidized beds. An effective diffusion coefficient in gas fluidized beds was introduced and correlated with bubble size as De = 13.3db2.7 for Group A and Group B particles. The mass transfer coefficient kbe can then be expressed as kbe = 0.492εmf√ubdb1.7 for bubbles in a three-dimensional bed and kbe = 0.576εm√ubdb1.7 for bubbles in a two-dimensional bed.