Examination of the Effective Factors on the Multiple Sclerosis Diseases

This study was an attempt to examine the effective factors of the Multiple Sclerosis diseases. The participants of the study were selected from among a total number of 45 men and women who were treated in a health center in Azarbayegan and Damavand in Iran. In order to study, the researchers applied various procedures to collect the data of the study. The participants were interviewed and filled out the questionnaires. After categorizing and classifying the collected information and data, it was processed and analyzed and the results are found. To test the research questions, a one-sample T-test was used to analyze the data. The role of hypo vitamin D as a possible risk factor for multiple sclerosis was reviewed. First, it was emphasized that hypo vitamin could be only one of the risk factors for multiple sclerosis and that numerous other environmental and genetic risk factors appear to interact and combine to trigger the disease. The main aim of this study was to examine the effective factors of Multiple Sclerosis diseases. The methodology of this research was to test the research questions;one-sample T-test was used to analyze the data. The findings of this study revealed that the factors of gender, cold weather, vitamin D deficiency, and age (between 30 - 59) were effective on the Multiple Sclerosis diseases.

Experimental Study and Fragility Analysis of Effective-Length Factors in Column Buckling

The design of columns relies heavily on the basis of Leonhard Euler’s Theory of Elastic Buckling.However,to increase the accuracy in determining the maximum critical load a column can withstand before buckling,a constant was introduced.This dimensionless coefficient is K,also known as the effective-length factor.This constant is often found in building design codes and varies in value depending on the type of column support that is applied.This paper presents experimental and analytical studies on the determination of the effective-length factor in the buckling stability of columns with partially-fixed support conditions.To this end,the accurate K value of the columns tested by the Instron Testing Machine(ITM)at California State University,Northridge’s(CSUN’s)Mechanics Laboratory is determined.The ITM is used in studying the buckling of columns where the supports are neither pinned nor fixed,and the material cross-section rather rests upon the machine while loading is applied axially.Several column specimens were tested and the experimental data were analyzed in order to estimation of the accurate effective-length factor.The calculations from the tested results as well as the conducted probabilistic analysis shed light on how a fragility curve may aid in predicting the effective-length value of future tests.

EFFECTIVENESS FACTOR FOR IRREGULAR CATALYST PELLET

The fractal theory was introduced into the gas solid catalytic reaction system to describe the influence of the surface irregularity of catalyst on the gas solid catalytic reaction.A fractal reaction diffusion model is proposed for irregular particles.Based on the shape characterization of the irregular particle,the mth order irreversible reactions are theoretically analyzed.A steady state equation of material balance and its solution as the concentration profile of reacting species are given for the reaction diffusion model for irregular particles.Meanwhile,the effectiveness factors are also expressed with fractal dimension.The results indicate that the higher the fractal dimensions,the higher the total reaction rate,and with the increase of the fractal dimension,the utilization factor of the catalyst is deeply increased.

ISOTHERMAL EFFECTIVENESS FACTORS FOR NONUNIFORM ACTIVE CATALYST

Isothermal effectiveness factors for slab,cylinder and sphere shaped catalysts with uniform or nonuni-form intrinsic activity profiles have been investigated.In the case of zero-,first- and second-order kinetics,the effectiveness factors of pellets with increasing activity towards the pellet surface are larger than that ofuniform active catalyst,and they are proportional to the square root of the activity at the pellet surfacewith significant diffusion effect.The effectiveness factor-Thiele modulus curves which are valid for bothuniform and nonuniform catalysts have been obtained with the Thiele modulus modified by equivalent thick-hess of effective layer of the catalyst.Thus,the effectiveness factor for nonuniform active catalyst could bepredicted with a maximun deviation of 5% in the case of significant or insignificant diffusion effect but 10%in general.

The Refractive Effect of k-Factor on Radio Propagation over Lokoja, Nigeria

The effective earth radius factor(k-factor)has a refractive propagation effect on transmitted radio signals thus making its study necessary for the proper planning of terrestrial radio links and power budget.This study was carried out over the city of Lokoja,Nigeria,using ten years(2011 to 2020)atmospheric data of temperature,pressure and humidity both at the surface(12 m)and at 100 m AGL.The data were retrieved from European Centre for Medium-Range Weather Forecasts(ECMWF)ERA5.The k-factor yearly variation follows the same trend with minimum and maximum values obtained during dry and wet season months respectively.In addition,the highest mean value of 1.00042 was recorded in the month of August while the lowest value of 1.00040 was recorded in the month of January with an overall mean value of 1.0003.This value is less than the recommended standard of 1.33 by ITU-R.The propagation effect corresponding to k<1.33 is sub-refractive.The implication of this on radio wave propagation,especially terrestrial communications is that transmitted wireless signal is prone to losses.This can be mitigated through an effective power budget:Choice of transmitting antenna’s height and gain,so as to improve the Quality of Service over the study area.

Factors affecting phenol adsorption on clay-solidified grouting curtain

Batch experiments were conducted to study the adsorption of phenol on clay-solidified grouting curtain (CSGC) and the effects of contact time,pH and adsorbent concentration on the adsorption were investigated.Under the experimental conditions used,2 d was adequate to determine the equilibrium of phenol adsorption onto CSGC.The amount of phenol adsorbed by CSGC from an initial concentration of 100mg/L was found to be 8.4mg/g.The adsorption process includes particle diffusion and liquid film diffusion,and the latter is the predominating step of the adsorption process.The adsorption ability of CSGC decreased with pH but it increased non-linearly with the CSGC concentration.The optimized concentration for CSGC was found to be 20g/L for the adsorption of 100mg/L phenol.

Predictive active control of building structures using LQR and artificial intelligence

This study presents a neural network-based model for predicting linear quadratic regulator(LQR)weighting matrices for achieving a target response reduction.Based on the expected weighting matrices,the LQR algorithm is used to determine the various responses of the structure.The responses are determined by numerically analyzing the governing equation of motion using the state-space approach.For training a neural network,four input parameters are considered:the time history of the ground motion,the percentage reduction in lateral displacement,lateral velocity,and lateral acceleration,Output parameters are LQR weighting matrices.To study the effectiveness of an LQR-based neural network(LQRNN),the actual percentage reduction in the responses obtained from using LQRNN is compared with the target percentage reductions.Furthermore,to investigate the efficacy of an active control system using LQRNN,the controlled responses of a system are compared to the corresponding uncontrolled responses.The trained neural network effectively predicts weighting parameters that can provide a percentage reduction in displacement,velocity,and acceleration close to the target percentage reduction.Based on the simulation study,it can be concluded that significant response reductions are observed in the active-controlled system using LQRNN.Moreover,the LQRNN algorithm can replace conventional LQR control with the use of an active control system.

Effects of main range and strength factors on change of COD in a shallow lake

A model involving the relationship between non conservative matter (COD) and main range factors(loading, water stage) and strength factor (temperature) in a shallow lake has been established on the basis of less change of water stage area curve in certain extent, broader distribution in pollution sources and more homogeneous in quantity of heat. The effects of COD inflow and /or outflow, and hydro meterological factors upon COD content in Lake Taihu were calculated and simulated under the actual situation of the loadings and regimen. The results simulated by using the model are in better agreement with the observed field data. The error of the model was also discussed.

Analysis of effect factors-based stochastic network planning model

Looking at all the indeterminate factors as a whole and regarding activity durations as independent random variables, the traditional stochastic network planning models ignore the inevitable relationship and dependence among activity durations when more than one activity is possibly affected by the same indeterminate factors. On this basis of analysis of indeterminate effect factors of durations, the effect factors-based stochastic network planning （EFBSNP） model is proposed, which emphasizes on the effects of not only logistic and organizational relationships, but also the dependent relationships, due to indeterminate factors among activity durations on the project period. By virtue of indeterminate factor analysis the model extracts and describes the quantitatively indeterminate effect factors, and then takes into account the indeterminate factors effect schedule by using the Monte Carlo simulation technique. The method is flexible enough to deal with effect factors and is coincident with practice. A software has been developed to simplify the model-based calculation, in VisualStudio.NET language. Finally, a case study is included to demonstrate the applicability of the proposed model and comparison is made with some advantages over the existing models.

Analysis on the temporal-spatial distribution character and effect factors of PM10 in the hinterland of Taklimakan Desert and surrounding area

In recent years, the physical and chemical properties of dust aerosols from the dust source area in northem China have attracted increased attention. In this paper, Thermo RP 1400a was used for online continuous observation and study of the hinterland of Taldimakan, Tazhong, and surrounding areas of Kurnul and Hotan from 2004 to 2006. In combination with weather analysis during a sandstorm in the Tazhong area, basic characteristics and influencing factors of dust aerosol PMl0 have been summarized as below： （1） The occurrence days of floating dust and blowing dust appeared with an increasing trend in Kumul, Tazhong and Hotan, while the number of dust storm days did not significantly change. The frequency and intensity of dust weather were major factors affecting the concentration of dust aerosol PMI0 in the desert. （2） The mass concentration of PM10 had significant regional distribution characteris- tics, and the mass concentration at the eastern edge of Taklimakan, Kumul, was the lowest; second was the southern edge of the desert, Hotan; and the highest was in the hinterland of the desert, Tazhong. （3） High values of PM10 mass concentration in Kumul was from March to September each year; high values of PM^0 mass concentration in Tazhong and Hotan were distributed from March to August and the average concenlration changed from 500 to 1,000 gg/m3, respectively. （4） The average seasonal concentration changes of PM10 in Kumul, Tazhong and Hotan were： spring 〉 summer 〉 autumn 〉 winter; the highest average concentration of PMl0in Tazhong, was about 1,000 gg/m3 in spring and between 400 and 900 gg/m3 in summer, and the average concentration was lower in autumn and winter, basically between 200 and 400 gg/m3. （5） PMl0 concentration during the sandstorm season was just over two times the con- centration of the non-sandstorm season in Kumul, Tazhong and Hotan. The average concentrations of sandstorm season in Tazhong were 6.2 and 3.6 times the average concentrations of non-sandstorm season in 2004 and 2008, respectively. （6） The mass concentra- tion of PM10 had the following sequence during the dust weather： clear day 〈 floating dust 〈 floating and blowing dust 〈 sandstorm. The wind speed directly affects the concentration of PM10 in the atmosphere, the higher the wind speed, the higher the mass concen- tration. Temperature, relative humidity and bammelric pressure are important factors affecting the strength of storms, which could also indirectly affect the concentration change of PM~ 0 in the atmosphere.

Analysis of mass concentration of atmospheric particulate matter in a sandstorm course and its affecting factors in the Taklimakan Desert

During the course of a major sandstorm from April 17 to April 23, 2008 in the Taklimakan Desert, data pertaining to the mass concentrations of different-sized atmospheric particulate matter were observed continuously with Grimm 1.108, Thermo RP 1400a, TSP, and CAWS-600 instruments. The results showed that： （1） during the entire sandstorm process there were some dif- ferences between the daily mean particle concentration peaks and the hourly mean particle concentration peaks because the actual sandstorm lasted for only about 4 hr, whereas more particles were accumulated in the floating dust days before and after the actual sandstorm; （2） the intensity of the sandstorm was enhanced with the increase of wind speed, and this was related to the peak mass concentrations of atmospheric particulate matter; the wind speed directly affected the concentration of atmospheric particulate matter： the higher the wind speed, the higher the mass concentration （〉0.23 μm was 39,496.5 μg/m^3, and 〉20.0 μm was 5,390.7μg/m^3）; （3） the concentration changes of PM10 and TSP were also related to the course and intensity of the sandstorm; and （4） the mass concentration of atmospheric particulate matter had the following sequence during the dust weather： clear day 〈 floating dust 〈 floating and blowing dust 〈 sandstorm. Temperature, relative humidity, and barometric pressure are important factors affecting the strength of storms, which could also indirectly affect the concentration change of atmospheric particulate matter.

Interferon beta(IFN-β) treatment exerts potential neuroprotective effects through neurotrophic factors and novel neurotensin/neurotensin high affinity receptor 1 pathway

Multiple sclerosis（MS）is a chronic autoimmune disease of the central nervous system（CNS）characterized by coexisting processes of inflammation,demyelination,axonal neurodegeneration,and gliosis.It is the most common disabling neurological disease in young adulthood.

Factors Analysis of Affecting Loading and Reinforcing Scheme of Large Goods in Railway

Large goods transported in railway are kinds of special goods and they are very important in national construction. In order to transport safely, loading and reinforcing schemes must be made first. How to design a reasonable scheme will be affected by many factors. This paper presents the characteristic of the large goods, summarizes the process of designing a loading and reinforcing scheme of large good, then probes the factors of affecting the loading and reinforcing scheme and gives a detail analysis. It’s considered that those out-of-gauge and overweight degree of goods, center-of- gravity height of a loaded wagon, position of center-of-gravity of goods, type of wagon for using, reinforcement material and reinforcement method, transport expense and transport organization could affect a scheme in the aspects of safety, economy, rapidity and convenience. This conclusion will instruct and help to make a good scheme.

Equilibrium and kinetic Si isotope fractionation factors and their implications for Si isotope distributions in the Earth's surface environments

Several important equilibrium Si isotope fractionation factors among minerals,organic molecules and the H_4SiO_4 solution are complemented to facilitate the explanation of the distributions of Si isotopes in Earth's surface environments.The results reveal that,in comparison to aqueous H_4SiO_4,heavy Si isotopes will be significantly enriched in secondary silicate minerals.On the contrary,quadra-coordinated organosilicon complexes are enriched in light silicon isotope relative to the solution.The extent of ^(28)Si-enrichment in hyper-coordinated organosilicon complexes was found to be the largest.In addition,the large kinetic isotope effect associated with the polymerization of monosilicic acid and dimer was calculated,and the results support the previous statement that highly ^(28)Sienrichment in the formation of amorphous quartz precursor contributes to the discrepancy between theoretical calculations and field observations.With the equilibrium Si isotope fractionation factors provided here,Si isotope distributions in many of Earth's surface systems can be explained.For example,the change of bulk soil δ^(30)Si can be predicted as a concave pattern with respect to the weathering degree,with the minimum value where allophane completely dissolves and the total amount of sesquioxides and poorly crystalline minerals reaches their maximum.When,under equilibrium conditions,the well-crystallized clays start to precipitate from the pore solutions,the bulk soil δ^(30)Si will increase again and reach a constant value.Similarly,the precipitation of crystalline smectite and the dissolution of poorly crystalline kaolinite may explain the δ^(30)Si variations in the ground water profile.The equilibrium Si isotope fractionations among the quadracoordinated organosilicon complexes and the H_4SiO_4solution may also shed light on the Si isotope distributions in the Si-accumulating plants.

FACTORS AFFECTING THE TRACK OF TROPICAL CYCLONES AFTER LANDFALL IN EASTERN CHINA

The correlation and composite analysis are carried out in this paper to study major factors affecting the track of tropical cyclones (TCs) after their landfall in the east of China. The mid-tropospheric environmental steering flow is found to dominate the movement of a TC even after landfall, with the inertia and Coriolis force two other subordinates. A key region is discovered covering the east of China and Yellow Sea, in which the environmental flow significantly affects the movement of TCs making landfall in this part of China. When the subtropical high in this region strengthens and extends westward, accompanied by northward shrink of the westerly trough, the TC tends to move westward after landfall and disappear inland. However, when the subtropical high in this region weakens and shrinks eastward, accompanied by southward push of the westerly trough, the TC tends to recurve after landfall and re-enter the sea at a location to the north of the site of landfall. The environment before the landfall of a TC has little impact on its post-landfall track, which is sensitive to the environmental change 12 – 24 hours after landfall. A 6-hour lag is found between the environmental change and the movement of a TC after landfall.

ELECTROCARBOXYLATION OF ORGANIC COMPOUNDS WITH CARBON DIOXIDE CATALYTZED BY METALLOPORPHYRINS(Ⅳ)——EFFECT OF VARIOUS FACTORS ON ELECTROCARBOXYLATION

The effects of various factors on the electrocarboxylation of organic compounds with carbon dioxide catalyzed by metalloporphyrin are studied.The optimal potential of electrocar- boxylation is -1.6 V(vs.SCE).A weak protic solvent methanol can enhance catalytic activity. Tetrabutylammonium iodide is the best one of five electrolytes.The yields and current efficiencies of electrocarboxylation are increased slowly as the concentration of catalyst increases.

FACTORS INFLUENCING THE EFFECT OF RADIOIMMUNOTHERAPY ON LIVER CANCER

Factors influencing the therapeutic effect of radiolmmunotherapy with 131I labeled anti- human hepa-tocellular carcinoma (HCC) ferritin antibody (131I -FtAb) on thirty three patients with surgically proven unresectable HCC were studied. Multi- variable analysis with Cox' s regression model revealed that the statistically sig-nifieant factors include tumor size, activity of 131I administered each time and the second-look resection. Survival of patients with tumor diameter less than 10 cm was higher than that of patients with tumor diameter more than 10 cm (1-year survival; 84% versus 50%) 3-year survival; 63% versus 9% ). Patients administered with 5. 55×108 Bq to 9. 25× 10(?) of 131I-FtAb each time yielded better effect than those administered with more than 9. 25×108 Bq of 131I -FtAb (1-year, survival: 86% ver- sus 55%; 3-year survival: 50% versus 18%). When tumor shrank, patients underwent second-look resection had a higher survival than those without receiving second- look resection (1- year survival, 80%versus 66 %; 3-year survival; 80% versus 11%).

The effects of the environmental factors on Laminaria disease caused by alginic acid decomposing bacteria

-The rot disease of Laminaria occurs often in nurseries of sporeling and commercial cultivation in the sea and results in economic loss greatly. Usually the disease outbreaks accompanied with massive multiplication of alginic acid decomposing bacteria. From the section of the decaying Lamuutria which resulted from the inoculation of alginic acid decomposing bacteria, it was observed that the bacteria invaded the epiderm of the Laminaria surface at first, then entered the ex-odermis, endodermis and pith. In addition, there were a great amount of bacteria in the intercellular region and a lot of free cells of the algae in the decaying areas. The wall of some free cells was decomposed, which led to soft tissue or disintegration. Alginic acid decomposing bacteria are normal epiphytic microorganisms growing on Lamuutria surface. These bacteria do not cause disease at normal environmental conditions. The experiments showed that the unfavourable conditions, e. g. , wounding, overcrowding, high temperature reduced the ability of antibacterial activity and made the algae more susceptible to the pathogens and favoured the multiplication of alginic acid decomposing bacteria and finally led to the disease outbreak. The unfavourable environmental factors which resulted from a variety of reasons were the main cause of the disease.

Effect of ocean environmental factors on sound absorption by boric acid relaxation in sea water

By using the expressions for the maximum absorption per wavelength (αλ),and the relaxation frequency fr of the boric acid relaxation derived previously by the author and employing the related oceanographic literatures, the effects of pressure, temperature, pH and salinity on (αλ)r and ∫r of the boric acid relaxation in sea water have been estimated. Results show that ( αλ), not only increases with pH but also increases approximately linearly with pressure and temperature, and is nearly proportional to the 1. 35 power of salinity. However, pressure, pH and salinity have negligible effect on ∫r; therefore, ∫r, can be approximately expressed as a function of temperature only. Comparisons of the predicted with the measured ( αλ)r and ∫r in different ocean areas are given.