Three-dimensional direct numerical simulations of the wake flow downstream of a near-wall circular cylinder at different gap ratios and boundary layer thicknesses are carried out by using the iterative immersed bounda...Three-dimensional direct numerical simulations of the wake flow downstream of a near-wall circular cylinder at different gap ratios and boundary layer thicknesses are carried out by using the iterative immersed boundary method.The non-dimensional gap between the cylinder and the wall,G/D=0.2,0.6 and 1.0,the non-dimensional boundary layer thickness,δ/D=0.0,0.7 and 1.6,the Reynolds number,Re=350,and the aspect ratio of the cylinder,L/D=25are adopted.High-resolution visualizations of the complex vortex structures at differentδ/D and G/D are presented.The transition of the streamwise vortex mode,the combined effects ofδ/D and G/D on the flow statistics,the pressure and shear stress distribution and the hydrodynamic forces are analyzed.Results show that with decreasing G/D and increasingδ/D,the gap flow and its vortex-shedding are significantly weakened,together with an elongated wake and an enlarged low-velocity area near the wall,leading to the wake mode transition from the two-sided to one-sided vortex-shedding.Different relative positions of the cylinder regarding the boundary layer alter the flow features of the shear layers.With an increase inδ/D,the front stagnation point shifts to the upper surface,and the distance between the flow divergence point and the maximum pressure position increases.The mean drag coefficient and r.m.s.values of drag and lift coefficients decrease with a decrease in G/D and an increase inδ/D,while the mean lift coefficient increases with decreasing G/D but decreases with increasingδ/D.展开更多
在树脂传递模塑(Resin transfer molding,RTM)工艺中,边缘效应很容易导致制件产生空隙、干斑等缺陷,其根本原因是在纤维增强体和模具模腔之间的间隙区域树脂的流动阻力小,使得树脂在这一区域流动速度更快。基于达西定律并结合流体体积(V...在树脂传递模塑(Resin transfer molding,RTM)工艺中,边缘效应很容易导致制件产生空隙、干斑等缺陷,其根本原因是在纤维增强体和模具模腔之间的间隙区域树脂的流动阻力小,使得树脂在这一区域流动速度更快。基于达西定律并结合流体体积(Volume of Fluid,VOF)界面追踪方法建立了树脂在纤维增强体中的流动模型,开展RTM工艺边缘效应的数值模拟研究,模型可以准确模拟边缘效应的影响,同时研究树脂粘度及树脂注射压力等工艺参数对于流动时间的影响。研究结果可以对RTM工艺的改善优化提供帮助。展开更多
基金financially supported by the National Key R&D Program of China (Grant No.2022YFB2603000)the National Natural Science Foundation of China (Grant Nos.51779172 and 52179076)。
文摘Three-dimensional direct numerical simulations of the wake flow downstream of a near-wall circular cylinder at different gap ratios and boundary layer thicknesses are carried out by using the iterative immersed boundary method.The non-dimensional gap between the cylinder and the wall,G/D=0.2,0.6 and 1.0,the non-dimensional boundary layer thickness,δ/D=0.0,0.7 and 1.6,the Reynolds number,Re=350,and the aspect ratio of the cylinder,L/D=25are adopted.High-resolution visualizations of the complex vortex structures at differentδ/D and G/D are presented.The transition of the streamwise vortex mode,the combined effects ofδ/D and G/D on the flow statistics,the pressure and shear stress distribution and the hydrodynamic forces are analyzed.Results show that with decreasing G/D and increasingδ/D,the gap flow and its vortex-shedding are significantly weakened,together with an elongated wake and an enlarged low-velocity area near the wall,leading to the wake mode transition from the two-sided to one-sided vortex-shedding.Different relative positions of the cylinder regarding the boundary layer alter the flow features of the shear layers.With an increase inδ/D,the front stagnation point shifts to the upper surface,and the distance between the flow divergence point and the maximum pressure position increases.The mean drag coefficient and r.m.s.values of drag and lift coefficients decrease with a decrease in G/D and an increase inδ/D,while the mean lift coefficient increases with decreasing G/D but decreases with increasingδ/D.
文摘在树脂传递模塑(Resin transfer molding,RTM)工艺中,边缘效应很容易导致制件产生空隙、干斑等缺陷,其根本原因是在纤维增强体和模具模腔之间的间隙区域树脂的流动阻力小,使得树脂在这一区域流动速度更快。基于达西定律并结合流体体积(Volume of Fluid,VOF)界面追踪方法建立了树脂在纤维增强体中的流动模型,开展RTM工艺边缘效应的数值模拟研究,模型可以准确模拟边缘效应的影响,同时研究树脂粘度及树脂注射压力等工艺参数对于流动时间的影响。研究结果可以对RTM工艺的改善优化提供帮助。
