A hierarchical salt-rejection strategy for sustainable and high-efficiency solar-driven desalination

Solar steam generation(SSG)is widely regarded as one of the most sustainable technologies for seawater desalination.However,salt fouling severely compromises the evaporation performance and lifetime of evaporators,limiting their practical applications.Herein,we propose a hierarchical salt-rejection(HSR)strategy to prevent salt precipitation during long-term evaporation while maintaining a rapid evaporation rate,even in high-salinity brine.The salt diffusion process is segmented into three steps—insulation,branching diffusion,and arterial transport—that significantly enhance the salt-resistance properties of the evaporator.Moreover,the HSR strategy overcomes the tradeoff between salt resistance and evaporation rate.Consequently,a high evaporation rate of 2.84 kg m^(-2) h^(-1),stable evaporation for 7 days cyclic tests in 20 wt%NaCl solution,and continuous operation for 170 h in natural seawater under 1 sun illumination were achieved.Compared with control evaporators,the HSR evaporator exhibited a>54%enhancement in total water evaporation mass during 24 h continuous evaporation in 20 wt%salt water.Furthermore,a water collection device equipped with the HSR evaporator realized a high water purification rate(1.1 kg m^(-2) h^(-1)),highlighting its potential for agricultural applications.

Photochemical Efficiency of PSⅡ and Membrane Lipid Peroxidation in Leaves of indica and japonica Rice (Oryza sativa) Under Chilling Temperature and Strong Light Stress Conditions

Relationships between fluorescence parameters and membrane lipid peroxidation in leaves of indica and japonica rice (Oryza sativa L.) during later growth stage were studied under chilling temperature and strong light stress conditions. Results showed that D1 protein contents of PSⅡ in photosynthetic apparatus dropped, the generation of antheraxanthin (A) and zeaxanthin (Z) of xanthophyll cycle were inhibited partly, PSⅡ photochemical efficiency (F v/F m)and non-photochemical quenching (q N) were also decreased obviously. In addition, endogenous active oxygen scavenger—superoxide dismutase (SOD) reduced, superoxide anion radical (O -· 2) and malondialdehyde (MDA) accumulated, as a result, photooxidation of leaves occurred under chilling temperature and strong light stress conditions. Obvious differences in the changes of the above mentioned physiological parameters between indica and japonica rice were observed. Experiments in leaves treated with inhibitors under chilling temperature and strong light conditions showed that indica rice was more sensitive to chilling temperature with strong light and subjected to photooxidation more than japonica rice. Notable positive correlation between D1 protein contents and F v/F m or (A+Z)/(A+Z+V), and a marked negative correlation between F v/F m and MDA contents were obtained by regression analysis in indica and japonica rice during chilling temperature and strong light conditions. According to the facts mentioned above, it was inferred that PSⅡ photochemical efficiency(F v/F m) was the key index to forecast for the prediction of photooxidation under stress circumstances and the physiological basis were the synthetic capacity of D1 protein and the protection of xanthophyll cycle.

Energy Efficiency and Spectrum Efficiency in Underlay Device-to-Device Communications Enabled Cellular Networks

In this paper, we investigate the energy efficiency and spectrum efficiency, including one-hop device-to-device(D2D) communications mode and two-way amplify-and-forward(AF) relaying D2D communications mode in underlay D2D communications enabled cellular networks. An analysis of average energy efficiency and spectrum efficiency are developed and closed-form expressions are obtained for two types of D2D communications modes under the effect of Rayleigh fading channel, path loss, and co-channel interference. Analytical results are validated through numerical simulations. Based on the simulation, the effects of the interference, the distance between D2D pair and the position of relay node on the energy efficiency and spectrum efficiency of D2D communications are investigated. The optimal D2D transmission powers of these two modes to maximize the energy efficiency are also investigated.

Discussion on the sweep efficiency of hybrid steam-chemical process in heavy oil reservoirs: An experimental study

Non-condensable gas(NCG),foam and surfactant are the three commonly-used additives in hybrid steam-chemical processes for heavy oil reservoirs.Their application can effectively control the steam injection profile and increase the sweep efficiency.In this paper,the methods of microscale visualized experiment and macroscale 3D experiment are applied to systematically evaluate the areal and vertical sweep efficiencies of different hybrid steam-chemical processes.First,a series of static tests are performed to evaluate the effect of different additives on heavy oil properties.Then,by a series of tests on the microscale visualized model,the areal sweep efficiencies of a baseline steam flooding process and different follow-up hybrid EOR processes are obtained from the collected 2D images.Specifically,they include the hybrid steam-N_(2)process,hybrid steam-N2/foam process,hybrid steam-surfactant process and hybrid steam-N2/foam/surfactant process(N2/foam slug first and steam-surfactant co-injection then).From the results of static tests and visualized micromodels,the pore scale EOR mechanisms and the difference between them can be discussed.For the vertical sweep efficiencies,a macroscale 3D experiment of steam flooding process and a follow-up hybrid EOR process is conducted.Thereafter,combing the macroscale 3D experiment and laboratory-scaled numerical simulation,the vertical and overall sweep efficiencies of different hybrid steam-chemical processes are evaluated.Results indicate that compared with a steam flooding process,the areal sweep efficiency of a hybrid steam-N2process is lower.It is caused by the high mobility ratio in a steam-N2-heavy oil system.By contrast,the enhancement of sweep efficiency by a hybrid steam-N2/foam/surfactant process is the highest.It is because of the high resistance capacity of NCG foam system and the performance of surfactant.Specifically,a surfactant can interact with the oil film in chief zone and reduce the interfacial energy,and thus the oil droplets/films formed during steam injection stage are unlocked.For NCG foam,it can plug the chief steam flow zone and thus the subsequent injected steam is re-directed.Simultaneously,from the collected 2D images,it is also observed that the reservoir microscopic heterogeneity can have an important effect on their sweep efficiencies.From the 3D experiment and laboratory-scaled numerical simulation,it is found that a N2/foam slug can increase the thermal front angle by about 150 and increase the vertical sweep efficiency by about 26%.Among the four processes,a multiple hybrid EOR process(steam-N2/foam/surfactant process) is recommended than the other ones.This paper provides a novel method to systematically evaluate the sweep efficiency of hybrid steam-chemical process and some new insights on the mechanisms of sweep efficiency enhancement are also addressed.It can benefit the expansion of hybrid steam-chemical processes in the post steamed heavy oil reservoirs.

Energy Efficiency Optimization for D2D Communications Based on SCA and GP Method

In this paper, we propose an energy-efficient power control scheme for device-to-device(D2D) communications underlaying cellular networks, where multiple D2D pairs reuse the same resource blocks allocated to one cellular user. Taking the maximum allowed transmit power and the minimum data rate requirement into consideration, we formulate the energy efficiency maximization problem as a non-concave fractional programming(FP) problem and then develop a two-loop iterative algorithm to solve it. In the outer loop, we adopt Dinkelbach method to equivalently transform the FP problem into a series of parametric subtractive-form problems, and in the inner loop we solve the parametric subtractive problems based on successive convex approximation and geometric programming method to obtain the solutions satisfying the KarushKuhn-Tucker conditions. Simulation results demonstrate the validity and efficiency of the proposed scheme, and illustrate the impact of different parameters on system performance.

Investigating the Efficiency Coefficient of Pile Group in Clay Under Two-Way Lateral Load

This research investigates the behavior of a 2×2 pile group under two-directional lateral loads in addition to the vertical load.Through three-dimensional numerical modeling based on Flac 3D software,the study examines the total bearing capacity and efficiency coefficient of the pile group,considering factors such as the angle of lateral load,relative pile spacing,and relative stiffness of the pile-soil system.The findings highlight the significance of these factors in understanding and predicting the response of pile groups to changing lateral load directions.The results reveal that increasing the angle of the lateral load from 0°to 45°enhances both the maximum total lateral load and the efficiency coefficient of the pile group.When the relative stiffness of the pile-soil system significantly increases,soil stiffening occurs and reducing the relative spacing of the piles from 7 to 3 times the diameter of the piles diminishes the influence of the pile group.Consequently,the response of the pile group to lateral loads becomes more linear,with only a slight alteration in the maximum total lateral load and the efficiency coefficient when the lateral load is angled from 0°to 45°.Conversely,increasing the relative distance between the piles,specifically from 3 to 7 times the diameter of the piles,amplifies the influence of the pile group.Both the maximum total lateral load and the efficiency coefficient of the pile group exhibit an observed increase.These provide insights for designing pile groups and optimizing their performance under lateral loading conditions.

Energy efficiency optimization of relay-assisted D2D two-way communications with SWIPT

Aiming at the energy consumption of long-distance device-to-device(D2D) devices for two-way communications in a cellular network,this paper proposes a strategy that combines two-way relay technology(TWRT) and simultaneous wireless information and power transfer(SWIPT) technology to achieve high energy efficiency(EE) communication.The scheme first establishes a fractional programming problem to maximize EE of D2D,and transforms it into a non-fractional optimization problem that can be solved easily.Then the problem is divided into three sub-problems:power control,power splitting ratios optimization,and relay selection.In order to maximize EE of the D2D pair,the Dinkelbach iterative algorithm is used to optimize the transmitted power of two D2D devices simultaneously;the one-dimensional search algorithm is proposed to optimize power splitting ratios;an improved optimal relay selection scheme based on EE is proposed to select relay.Finally,experiments are carried out on the Matlab simulation platform.The simulation results show that the proposed algorithm has faster convergence.Compared with the one-way relay transmission and fixed relay algorithms,the proposed scheme has higher EE.

Effects of R134a Saturation Temperature on a Shell and Tube Condenser with the Nanofluid Flow in the Tube Using the Thermal Efficiency and Effectiveness Concepts

The work’s objective is to analyze the influence of the saturation temperature of the R134a refrigerant on the thermal performance of a shell and tube type condenser, with water and aluminum oxide (Al2O3) nanoparticles flowing into the tube. For analysis, the heat exchanger is subdivided into three regions: subcooled liquid, saturated steam, and superheated steam. The shell and tube heat exchanger assumed as the basis for the study has 36 tubes, with rows of 4 tubes in line and three passes into the tube in each region. The parameters used to analyze the performance are efficiency and effectiveness, through variations of quantities such as saturation temperature, the nanofluid’s mass flow rate, fraction in the nanoparticles’ volume, and the number of passes in the tube in each region of the heat exchanger. The obtained results demonstrate that the efficiency is relatively high in all the analyzed situations. In each saturation temperature, the effectiveness can be increased by introducing fractions of nanoparticles in the water or increasing the number of passes in the tube.

Economic Benefit Estimating of Polydimensional Efficiency Measurement Model Implementation

This paper is a revised and expanded version of a paper entitled “The static and dynamic criteria of building an investment asset portfolio” presented at International Conference on Applied Economics (ICOAE, 2014), Chania, 3-5 July 2014 and published at Procedia Economics and Finance, Volume 14, Pages 575-584 (2014) [1]. At the previous research, it showed the significance to go beyond the scope of selecting one or another metric of static efficiency. And the attention was paid to the dynamic efficiency criteria. The ICOAE 2015 research gives brief results of that work, which is only one of applied areas of polydimensional efficiency measurement model (PEMM). Research work on PEMM conceptual and methodical elaboration has been started in the author’s dissertation study [2] and continued in the practical activity and materialized in Innovative LLC (limited liability company) creating project. The research is concentrating on the real economic benefit of 3D PEMM (thee criterial PEMM version) implementation. In the first part of ICOAE 2015 empirical study, the dynamic component of 3D PEMM on the industrial level was tested. Next, the company economic profit changes and dynamic-market 3D PEMM components correlation was estimated. Finally, the economic benefit of 3D PEMM functional operationalization in the framework of management systems development was calculated.

政府R&D补贴的技术创新效应分析--基于2009-2021年中国的经验数据

政府R&D补贴既可以通过提供公共服务的方式直接作用于技术创新,也可以通过对社会资本的引导作用间接影响技术创新,其总效应取决于两种影响的方向与大小。基于2009—2021年中国的经验数据,建立了由技术创新方程和引致方程共同组成的动态模型,对政府R&D补贴的技术创新效应进行了实证分析。结果发现:持续增加的政府R&D补贴带来了国内专利授权数量的稳定增加,技术创新效应较为显著;政府R&D补贴不仅对技术创新产生了积极的直接影响,也通过引导社会资本投资于研发领域而对技术创新产生了积极的间接影响;政府R&D补贴的技术创新效应存在区域差异,中东部地区为正,而西部地区为负。提高资金使用效率、积极引导社会资本投资技术研发、努力改善欠发达地区的研发环境,无疑是提高政府R&D补贴技术创新效应的必要选择。

云南省R&D经费投入结构动态研究

为研究云南省“十二五”以来R&D经费投入结构变化,分析R&D经费投入现状,并与全国,东、中、西部地区及临近省份进行了对比;从资金来源和资金配置视角,运用Cobb-Douglas效用函数及其修正模型对R&D经费投入结构展开动态分析。结果表明:云南省R&D经费投入结构不尽合理,资金来源中政府资金占比较低且呈下降趋势,资金配置中基础研究和应用研究投入不足,与最优结构偏离程度较大。针对存在的问题,提出持续加大政府R&D经费投入力度、围绕产业链提升基础研究和应用研究比重的建议。

R&D资本化背景下我国TFP增长率再测算

研究与试验发展(R&D)资本对经济增长和科技创新作用日益凸显,但对于R&D资本的核算亟待完善。本文基于SNA2008和CSNA2016框架,将R&D支出作为资本形成,对我国各省份物质资本存量和R&D资本存量进行规范化测算,使用随机前沿分析法重新估算1991—2019年间的全要素生产率(TFP)增长率。研究发现:第一,我国R&D资本存量规模呈总体递增和地区聚集趋势;第二,1991—2019年间,我国广义TFP增长率年平均增幅为2.10%,对经济增长存在正向作用;第三,将TFP增长率分解为技术进步、前沿技术效率和规模效应,发现技术进步对TFP增长率的贡献最大,是推动我国TFP增长的主导力量,但却呈现逐年递减的趋势;第四,随着我国对R&D投入的不断增加与重视,R&D对我国广义TFP增长率的贡献呈现递增的趋势,R&D的贡献逐渐成为推动我国科技进步的主要力量。

政府R&D资助对OFDI逆向绿色创新的影响机制研究

应用中国分省区层面数据并采用面板门槛模型,实证考察了政府R&D资助影响OFDI逆向绿色创新的动态效应。研究发现,OFDI对国内绿色创新产生了显著的驱动效应,但这种影响呈现出明显的先负后正的“U”型动态演化特征;政府R&D资助会正向调节OFDI逆向绿色创新溢出,且存在最适宜于OFDI逆向绿色创新的政府R&D资助区间(0.366,0.428],过高或过低强度的政府R&D资助均会在一定程度上造成OFDI逆向绿色创新的红利损失;政府R&D资助调节下OFDI对绿色创新的动态影响具有显著时空异质性,即在时空维度上存在“激励效应”与“挤出效应”交替演化的鲜明特征。

Energy Efficient Power Allocation for Relay-Aided D2D Communications in 5G Networks

As one of the key technologies for the fifth generation(5G) wireless networks,device-to-device(D2D) communications allow user equipment(UE) in close proximity to communicate with each other directly.Forwarded by a relay,the relay-aided D2D(RA-D2D) communications can not only be applied to communications in much longer distance but also achieve a high quality of service(Qo S) .In this paper,we first propose a two-layer system model allowing RA-D2 D links to underlay traditional cellular uplinks.Then we maximize the energy efficiency of the RA-D2 D link while satisfying the minimum data-rate of the cellular link.The optimal transmit power at both D2 D transmitter and D2 D relay sides is obtained by transforming the nonlinear fractional programming into a nonlinear parameter programming.Simulation results show that our proposed power allocation method is more energy efficient than the existing works,and the proposed RA-D2 D scheme outperformed direct D2 D scheme when the distance between two D2 D users is longer.

企业R&D支出费用化资本化与会计盈余管理行为选择研究——基于中国部分上市公司的经验数据

本文基于中国部分上市公司的数据,选取R&D支出全部费用化、全部资本化、部分资本化3个虚拟变量及R&D支出费用化金额、资本化金额用以表征R&D支出披露形式,研究上市公司R&D支出会计政策选择是否与盈余管理程度相关,进而检验R&D支出会计处理盈余管理路径,即检验R&D支出费用化、资本化的确定依据是否受其他非准则因素影响。研究结果显示,有条件资本化会计处理可能成为管理层盈余管理手段,包括应计盈余管理和真实盈余管理。在确定R&D支出费用化金额、资本化金额及R&D支出费用化强度上,管理层除了依据会计准则,还要依据当期利润情况、所得税负、利润质量、审计成本、利润平滑和公司独立性的影响。

High Efficient Methods of Content-based 3D Model Retrieval

Content-based 3D model retrieval is of great help to facilitate the reuse of existing designs and to inspire designers during conceptual design. However, there is still a gap to apply it in industry due to the low time efficiency. This paper presents two new methods with high efficiency to build a Content-based 3D model retrieval system. First, an improvement is made on the ＂Shape Distribution （D2）＂ algorithm, and a new algorithm named ＂Quick D2＂ is proposed. Four sample 3D mechanical models are used in an experiment to compare the time cost of the two algorithms. The result indicates that the time cost of Quick D2 is much lower than that of D2, while the descriptors extracted by the two algorithms are almost the same. Second, an expandable 3D model repository index method with high performance, namely, RBK index, is presented. On the basis of RBK index, the search space is pruned effectively during the search process, leading to a speed up of the whole system. The factors that influence the values of the key parameters of RBK index are discussed and an experimental method to find the optimal values of the key parameters is given. Finally, ＂3D Searcher＂, a content-based 3D model retrieval system is developed. By using the methods proposed, the time cost for the system to respond one query online is reduced by 75% on average. The system has been implemented in a manufacturing enterprise, and practical query examples during a case of the automobile rear axle design are also shown. The research method presented shows a new research perspective and can effectively improve the content-based 3D model retrieval efficiency.

Energy-Efficient Resource Allocation for Heterogeneous Network with Grouping D2D

In this paper,a new communication model is built named grouping D2D(GD2D).Different from the traditional D2D coordination,we proposed GD2D communication in licensed and unlicensed spectrum simultaneously.We formulate a resource allocation problem,which aims at maximizing the energy efficiency(EE)of the system while guaranteeing the quality-of-service(Qos)of users.To efficiently solve this problem,the non-convex optimization problem is first transformed into a convex optimization problem.By transforming the fractional-form problem into an equivalent subtractive-form problem,an iterative power allocation algorithm is proposed to maximize the system EE.Moreover,the optimal closedform power allocation expressions are derived by the Lagrangian approach.Simulation results show that our algorithm achieves higher EE performance than the traditional D2D communication scheme.

Energy efficient resource allocation for D2D multicast communications

The resource allocation for device-to-device(D2D)multicast communications is investigated.To achieve fair energy efficiency(EE)among different multicast groups,the max-min fairness criterion is used as the optimization criterion and the EE of D2D multicast groups are taken as the optimization objective function.The aim is to maximize the minimum EE for different D2D multicast groups under the constraints of the maximum transmit power and minimum transmit rate,which is modeled as a non-convex and mixed-integer fractional programming problem.Here,suboptimal resource allocation algorithms are proposed to solve this problem.First,channel assignment scheme is performed to assign channel to D2D multicast groups.Second,for a given channel assignment,iterative power allocation schemes with and without loss of cellular users’rate are completed,respectively.Simulation results corroborate the convergence performance of the proposed algorithms.In addition,compared with the traditional throughput maximization algorithm,the proposed algorithms can improve the energy efficiency of the system and the fairness achieved among different multicast groups.

Formamidinium-incorporated Dion-Jacobson phase 2D perovskites for highly efficient and stable photovoltaics

Dion-Jacobson phase two-dimensional(DJ 2D)perovskites,recently attracting considerable interests,exhibit excellent environmental stability and structural tunability,but their solar cells still offer unsatisfactory power conversion efficiencies(PCEs).Herein,we develop DJ 2D perovskites employing formamidinium(FA+)as a ternary cation in the perovskite cages((PDA)(FA)x(MA)3-xPb4 I13,χ=0,0.15,0.3 and 0.6,PDA=1,3-propanediammonium)for highly efficient and stable perovskite solar cells(PSCs).We found that the DJ 2D perovskite with a 10%FA+fraction presents improved crystallinity,preferred vertical orientation,and longer charge carrier lifetime compared to that without FA+doping.As a result,the FAdoped DJ 2D PSCs exhibit a champion PCE of 14.74%with superior device stability.The unencapsulated devices sustain over 92%of its initial PCE after storage at a constant relative humidity(RH)of 65%for 6000 h,90%by heat at 85℃in air for 800 h,and 94%under 1-sun illumination for 5000 h.These findings demonstrate that the incorporation of FA cation into the DJ 2D perovskite is a promising strategy to develop highly efficient and stable DJ 2D PSCs.

Petrographic, Geochemical and Metallogenical Context of the Geological Formations of the Goumere Region (North-East of Cote D’Ivoire): Implication to the Knowledge of Gold Mineralization

The Gouméré region is located in the North-East of Côte d’Ivoire and is located in the South-West of the Bui furrow. In order to highlight the geology of the area studied, 14 samples were taken for studies using petrographic, geochemical and metallogenic methods. The study of macroscopic and microscopic petrography made it possible to highlight two major lithological units: 1) a volcano-plutonic unit, formed of gabbros, basalt, volcaniclastics and rhyodacite;2) a sedimentary unit (microconglomerate). From a geochemical point of view, the results obtained indicate that the plutonites are gabbro and gabbro diorite while the volcanics have compositions of basaltic andesites, rhyolite and dacites. The sediments have a litharenitic to sublitharenitic character. The metallogenic study made it possible to highlight hydrothermal alterations and metalliferous paragenesis on the formations studied. Hydrothermal alteration is characterized by the presence of carbonation, silicification, sericitization, sulfidation and to a lesser degree chloritization. Metalliferous paragenesis consists of pyrite, chalcopyrite, hematite and magnetite.