A Loss-model-based Efficiency Optimization Control Method for Induction Traction System of High-speed Train under Emergency Self-propelled Mode

Increasing attention has been paid to the efficiency improvement of the induction traction system of high-speed trains due to the high demand for energy saving. In emergency self-propelled mode, however, the dc-link voltage and the traction power of the motor are significantly reduced, resulting in decreased traction efficiency due to the low load and low speed operations. Aiming to tackle this problem, a novel efficiency improved control method is introduced to the emergency mode of high-speed train traction system in this paper. In the proposed method, a total loss model of induction motor considering the behaviors of both iron and copper loss is established. An improved iterative algorithm with decreased computational burden is then introduced, resulting in a fast solving of the optimal flux reference for loss minimization at each control period. In addition, considering the parameter variation problem due to the low load and low speed operations, a parameter estimation method is integrated to improve the controller's robustness. The effectiveness of the proposed method on efficiency improvement at low voltage and low load conditions is demonstrated by simulated and experimental results.

Integrated assessment of yield,nitrogen use efficiency and ecosystem economic benefits of use of controlled-release and common urea in ratoon rice production

Controlled-release urea(CRU)is commonly used to improve the crop yield and nitrogen use efficiency(NUE).However,few studies have investigated the effects of CRU in the ratoon rice system.Ratoon rice is the practice of obtaining a second harvest from tillers originating from the stubble of the previously harvested main crop.In this study,a 2-year field experiment using a randomized complete block design was conducted to determine the effects of CRU on the yield,NUE,and economic benefits of ratoon rice,including the main crop,to provide a theoretical basis for fertilization of ratoon rice.The experiment included four treatments:(i)no N fertilizer(CK);(ii)traditional practice with 5 applications of urea applied at different crop growth stages by surface broadcasting(FFP);(iii)one-time basal application of CRU(BF1);and(iv)one-time basal application of CRU combined with common urea(BF2).The BF1 and BF2 treatments significantly increased the main crop yield by 17.47 and 15.99%in 2019,and by 17.91 and 16.44%in 2020,respectively,compared with FFP treatment.The BF2 treatment achieved similar yield of the ratoon crop to the FFP treatment,whereas the BF1 treatment significantly increased the yield of the ratoon crop by 14.81%in 2019 and 12.21%in 2020 compared with the FFP treatment.The BF1 and BF2 treatments significantly improved the 2-year apparent N recovery efficiency,agronomic NUE,and partial factor productivity of applied N by 11.47-16.66,27.31-44.49,and 9.23-15.60%,respectively,compared with FFP treatment.The BF1 and BF2 treatments reduced the chalky rice rate and chalkiness of main and ratoon crops relative to the FFP treatment.Furthermore,emergy analysis showed that the production efficiency of the BF treatments was higher than that of the FFP treatment.The BF treatments reduced labor input due to reduced fertilization times and improved the economic benefits of ratoon rice.Compared with the FFP treatment,the BF1 and BF2 treatments increased the net income by 14.21-16.87 and 23.76-25.96%,respectively.Overall,the one-time blending use of CRU and common urea should be encouraged to achieve high yield,high nitrogen use efficiency,and good quality of ratoon rice,which has low labor input and low apparent N loss.

High-Efficiency Dynamic Scanning Strategy for Powder Bed Fusion by Controlling Temperature Field of the Heat-Affected Zone

Improvement of fabrication efficiency and part performance was the main challenge for the large-scale powder bed fusion(PBF)process.In this study,a dynamic monitoring and feedback system of powder bed temperature field using an infrared thermal imager has been established and integrated into a four-laser PBF equipment with a working area of 2000 mm×2000 mm.The heat-affected zone(HAZ)temperature field has been controlled by adjusting the scanning speed dynamically.Simultaneously,the relationship among spot size,HAZ temperature,and part performance has been established.The fluctuation of the HAZ temperature in four-laser scanning areas was decreased from 30.85℃to 17.41℃.Thus,the consistency of the sintering performance of the produced large component has been improved.Based on the controllable temperature field,a dynamically adjusting strategy for laser spot size was proposed,by which the fabrication efficiency was improved up to 65.38%.The current research results were of great significance to the further industrial applications of large-scale PBF equipment.

Analysis and experimental study on resistance-increasing behavior of composite high efficiency autonomous inflow control device

Bottom water coning is the main reason to reduce the recovery of horizontal bottom water reservoir. By water coning, we mean the oil-water interface changes from a horizontal state to a mound-shaped cone and breaks through to the wellbore. Autonomous inflow control device(AICD) is an important instrument maintain normal production after bottom water coning, however, the resistance increasing ability of the swirl type AICD is insufficient at present, which seriously affects the water control effect. Aiming this problem, this paper designs a multi-stage resistance-increasing and composite type AICD. The separation mechanism of oil-water two phases in this structure, the resistance form of oil-water single phase and the resistance-increasing principle of water phase are analyzed. Establishing the dual-phase multi-stage separation and resistance-increasing model, and verified by measuring the throttling pressure drop and oil-water volume fraction of the AICD, it is found that the composite type AICD has the effect of ICD and AICD at the same time, which can balance the production rate of each well section at the initial stage of production, delay the occurrence of bottom water coning. In the middle and later stages of production, water-blocking can be effectively increased to achieve water control and stable production.After structural sensitivity analysis, the influence law of various structural parameters on the water control performance of composite AICD was obtained. The simulation calculation results show that,compared with the existing swirl type AICD, composite AICD has higher sensitivity to moisture content,the water phase throttling pressure drop is increased by 4.5 times on average. The composite AICD is suitable for the entire stage of horizontal well production.

Modeling, Analysis and Simulation of a High-Efficiency Battery Control System

This paper explains step-by-step modeling and simulation of the full circuits of a battery control system and connected together starting from the AC input source to the battery control and storage system.The three-phase half-controlled rectifier has been designed to control and convert the AC power into DC power.In addition,two types of direct current converters have been used in this paper which are a buck and bidirectional DC/DC converters.These systems adjust the output voltage to be lower or higher than the input voltage.In the buck converters,the main switch operates in conduction or cut-off mode and is triggered by a Pulse-Width Modulated(PWM)signal.The output and input voltage levels ratio are used to calculate thePWMsignal’s duty cycle.Therefore,the duty cycle indicates the operation mode of the converter in steady-state operation.In this study,we analyze and control of a buck converter with the PWM signal.Besides,the bidirectional DC/DC converter has been achieved and optimized by PI control methods to control the battery charging and discharging modes.The simulation has been applied via the Matlab/Simulink environment.The results show the activity of each part of the designed circuits starting from the converters and the battery control system in charge and discharge modes.

Efficacy of High-efficiency Formula Pesticides for Controlling Sesamia inferens Walker and Ceratovacuna lanigera Zehntner

[Objectives]This study was conducted to screen high-efficiency formula pesticides and precise and efficient application techniques for the prevention and control of Sesamia inferens Walker and Ceratovacuna lanigera Zehntner.[Methods]Field efficacy trials were conducted using different combinations of 70%directed enhanced thiamethoxam seed treatment dispersible powder and 46%monosultap·Bacillus thuringiensis wettable powder.[Results]70%directed enhanced thiamethoxam ZF 450 g/hm^(2)+46%monosultap·B.thuringiensis WP 2250 g/hm^(2)had good control effects on both S.inferens and C.lanigera,so it was an ideal high-efficiency formula pesticide for controlling sugarcane S.inferens and C.lanigera.From January to May,combining with new plant or perennial root cultivation management,70%directed enhanced thiamethoxam ZF 450 g/hm^(2)can be evenly spread on sugarcane ditches and sugarcane stumps after being well mixed with fertilizers applied per hectare,and covered with soil in a timely manner,and during the peak incubation period of the first and second generation of S.inferens eggs from March to May,46%monosultap·B.thuringiensis WP 2250 g/hm^(2)was sprayed to the leaf surface in the mixture with water 675 kg with an electric backpack or a motorized sprayer.In such a way,the control efficacy on dead heart seedlings could reach over 89.8%,and that on C.lanigera could reach 100%.Meanwhile,it could effectively and concurrently control thrips,and the increases in yield and sugar content could reach 29310 kg/hm^(2)and 5.9 percentage points,respectively.[Conclusions]The promotion and application of the formula pesticide could achieve precise application and control of sugarcane pests,and improvement of sugarcane quality and planting efficiency,and help promote green prevention and control of sugarcane diseases and pests and the sustained high-quality development of the sugar industry.

Effect of Slow and Controlled Release Fertilizers on the Yield and Nutrient Use Efficiency of Hot Pepper in Qiu-bei

[Objective] The aim of this study was to investigate the impacts of slow and controlled release fertilizers（SCRF）on the yield of qiubei hot pepper,its nutrient use efficiency and environment.[Method] Using Qiubei hot pepper（Capsicum frutescens L.）as the experimental material,we studied the fertilization effect and environment-protecting effect of SCRF.[Result] The result showed that SCRF could improve the agronomic characteristics of hot pepper.Compared to singly applied common fertilizers,SCRF increased economic yield by 20.90% and economic benefit by 13 234.35 Yuan/hm2,and the ratio of output to input was improved by 47.93%.In comparison with common straight fertilizers at same NPK proportion and rate,SCRF increased economic yield by 5.26% and economic benefit by 5 554.80 Yuan/hm2,and the ratio of output to input was improved by 9.91%.Under the reduced use of SCRF by 20%,SCRF increased economic yield by 12.38% and economic benefit by 9595.20 Yuan/hm2 compared with singly applied common fertilizers,and the ratio of output to input was improved by 65.95%.SCRF improved nitrogen,phosphorus and potassium use efficiencies by 12.42-17.53,3.35-5.24 and 5.37-14.02 percents respectively.[Conclusion] As the result of much reduced N and P application rates,SCRF would significantly economize fertilizer resources and minimize the pollution caused by the loss of fertilizer nutrients,which is of practical importance for environment protection.

Study on maximum efficiency control strategy for induction motor

Two new techniques for efficiency-optimization control(EOC) of induction motor drives were proposed. The first method combined Loss Model and "golden section technique", which was faster than the available methods. Secondly, the low-frequency ripple torque due to decrease of rotor flux was compensated in a feedforward manner. If load torque or speed command changed, the efficiency search algorithm would be abandoned and the rated flux would be established to get the best transient response. The close agreement between the simulation and the experimental results confirmed the validity and usefulness of the proposed techniques.

Controlled drainage in the Nile River delta of Egypt:a promising approach for decreasing drainage off-site effects and enhancing yield and water use efficiency of wheat

North Africa is one of the most regions impacted by water shortage.The implementation of controlled drainage(CD)in the northern Nile River delta of Egypt is one strategy to decrease irrigation,thus alleviating the negative impact of water shortage.This study investigated the impacts of CD at different levels on drainage outflow,water table level,nitrate loss,grain yield,and water use efficiency(WUE)of various wheat cultivars.Two levels of CD,i.e.,0.4 m below the soil surface(CD-0.4)and 0.8 m below the soil surface(CD-0.8),were compared with subsurface free drainage(SFD)at 1.2 m below the soil surface(SFD-1.2).Under each drainage treatment,four wheat cultivars were grown for two growing seasons(November 2018–April 2019 and November 2019–April 2020).Compared with SFD-1.2,CD-0.4 and CD-0.8 decreased irrigation water by 42.0%and 19.9%,drainage outflow by 40.3%and 27.3%,and nitrate loss by 35.3%and 20.8%,respectively.Under CD treatments,plants absorbed a significant portion of their evapotranspiration from shallow groundwater(22.0%and 8.0%for CD-0.4 and CD-0.8,respectively).All wheat cultivars positively responded to CD treatments,and the highest grain yield and straw yield were obtained under CD-0.4 treatment.Using the initial soil salinity as a reference,the soil salinity under CD-0.4 treatment increased two-fold by the end of the second growing season without negative impacts on wheat yield.Modifying the drainage system by raising the outlet elevation and considering shallow groundwater contribution to crop evapotranspiration promoted water-saving and WUE.Different responses could be obtained based on the different plant tolerance to salinity and water stress,crop characteristics,and growth stage.Site-specific soil salinity management practices will be required to avoid soil salinization due to the adoption of long-term shallow groundwater in Egypt and other similar agroecosystems.

On the Bacteriostatic Activity of Bacillus subtilis and Pyraclostrobin as Well as Their Mixtures to Grape Anthracnose and the Field Disease Control Efficiency

[Objective] To screen out the biological compound bactericides for grape anthracnose, reduce and replace the use of chemical pesticide. [Methods] The de- termination on the indoor bacteriostatic activity of different proportions of Bacillus subtilis and pyraclostrobin to grape anthracnose was carried out, and mycelial growth rate method was adopted to determine the toxicity of Bacillus subtilis and pyraclostrobin as well as their 5 mixtures to grape anthracnose. [Results] The EC50 of Bacillus subtilis and pyraclostrobin as well as their mixture combinations of 1：1, 1：2, 1：3, 1：4 and 1：5 to grape anthracnose were respectively 1.969 8, 1.527 4, 1.373 2, 1.294 8 and 1.247 3 μg/ml; the synergistic coefficients （SR） of the 5 mix- ture combinations to grape anthracnose were 1.70, 1.25, 1.13, 1.12 and 1.12, re- spectively, in which the synergistic effect of 1：1 was the largest. The indoor biologi- cal activity of pyraclostrobin（EC50 was 1.054 0μg/ml） was higher than that of Bacil- lus subtilis（EC50 was 15.017 5 μg/ml）. 50 d after the agentia（before the harvesting）, the investigation results showed that 1 000-fold dilution, 1 500-fold dilution and 2 000- fold dilution as well as each single dosage of 20% pyraclostrobin .200×10^8 cfu/g Bacillus subtili wettable powder all had better control efficiency to grape anthracnose after fruit setting and before bagging, in which the treatments of high concentration and middle concentration were higher than the treatments of low concentration and two single dosages： the highest control efficiency of high concentration was 90.03%, which was higher than all other treatments; the control efficiency of middle concen- tration was 87.01%, which was higher than that of low concentration and each sin- gle dosage; the control efficiency of low concentration was 84.11%, which was high- er than 1 000-fold dilution of 1 000×10^8 cfu/g Bacillus subti/i wettable powder （the control efficiency was 64.60%） and 2 000-fold dilution of 250 g/L Bacillus subti/i wettable powder （the control efficiency was 81.07%）. In addition, each treatment al- so had better control efficiency to other cluster diseases, such as white rot, etc., and the control efficiency was almost the same as that of anthracnose. [Conclusion] It was suggested that the prevention concentration of 20% pyraclostrobin .200×10^8 cfu/g Bacillus subtili wettable powder to grape anthracnose after fruit setting and before bagging was 1 000-fold - 2 000-fold dilution.

Effects of Controlled-Release Nitrogen on Yield and Nitrogen Use Efficiency of Summer Maize

The field experiments were conducted in Anhui during 2016 to investigate the effects of controlled-release nitrogen （CRN） rates and mixture of controlled-re- lease nitrogen and conventional nitrogen （CN） on the yield and nitrogen efficiency of summer maize. Six treatments included CK （with no application of N）, CNIO0% splits （CN）, CRFIO0% （CRN1）, CRN60%＋CN40% （CRN2）, CRN85% （CRN3） and CRN70% （CRN4）. The results showed proper CRN increased yields and output val- ue. Compared with CN, CRN2 significantly increased by 13.74%, CRN1 increased by 4.84%, and CRN3 was equal to CN. CRN increased yield by grain number per spike of yield components. CRN2 had the highest apparent nitrogen fertilizer recov- ery efficiency and CRN1 was the second, which were significantly higher than CN. Nitrogen agronomic efficiency of CRN2 was significantly higher than CN. Nitrogen physiological efficiency of CRN2 was higher than CN. The partial productivity of CRN1 was higher than that with CN. And the effect of nitrogen fertilizer of CRN2 was the highest, which was increased 758 yuan/hm2. Considering yield, nitrogen use efficiency and economic benefit, applying the mixture of CRN and CN was the most beneficial treatment. CRN1 was the second treatment, and CRN3 didn＇t reduce yield.

Operation Efficiency Optimisation Modelling and Application of Model Predictive Control

The efficiency of any energy system can be charaterised by the relevant efficiency components in terms of performance, operation, equipment and technology(POET). The overall energy efficiency of the system can be optimised by studying the POET energy efficiency components. For an existing energy system, the improvement of operation efficiency will usually be a quick win for energy efficiency. Therefore, operation efficiency improvement will be the main purpose of this paper. General procedures to establish operation efficiency optimisation models are presented. Model predictive control, a popular technique in modern control theory, is applied to solve the obtained energy models. From the case studies in water pumping systems, model predictive control will have a prosperous application in more energy efficiency problems.

Use of Controlled Release Fertilizer for Increasing N Efficiency of Direct Seeding Rice

Field trials on a silt-loamy paddy soil derived from shallow-sea deposit in direct seeding rice fields were conducted in Zhejiang, China, in 1996 to compare N efficiency of controlled release fertilizers (LP fertilizers) with the conventional urea. Six treatments including CK (no N fertilizer), conventional urea and different types of LP fertilizers at different rates were designed for two succeeding crops of early and late rice. A blend of different types of LP fertilizers as a single preplant "co-situs" application released N in a rate and amount synchronizing with uptake pattern of direct seeding rice. A single preplant application of the LP fertilizers could meet the N requirement of rice for the whole growth period without need of topdressing. Using LP fertilizer blends, equivalent grain yields could be maintained even if the N fertilization rates were reduced by 25%～50% compared with the conventional urea. Agronomic efficiency of the LP fertilizers was 13.6%～ 86.4% higher than that of the conventional urea in early rice and 100%～164.1% in late rice, depending on the amounts of the LP fertilizers applied. N fertilizer recovery rate increased from 27.4% for the conventional application of urea to 41.7%～54.l% for the single preplant "co-situs" application of the LP fertilizers. Use of the LP fertilizers was promising if the increase in production costs due to the high LP fertilizer prices could be compensated by increase in yield and N efficiency, reduction in labor costs and improvement in environment.

A Tutorial on Quantized Feedback Control

In this tutorial paper, we explore the field of quantized feedback control, which has gained significant attention due to the growing prevalence of networked control systems. These systems require the transmission of feedback information, such as measurements and control signals, over digital networks, presenting novel challenges in estimation and control design. Our examination encompasses various topics, including the minimal information needed for effective feedback control, the design of quantizers, strategies for quantized control design and estimation,achieving consensus control with quantized data, and the pursuit of high-precision tracking using quantized measurements.

Evaluation of the impacts of adaptive cruise control system on improving fuel efficiency of urban road traffic

The impact of the adaptive cruise control（ ACC）system on improving fuel efficiency is evaluated based on the vehicle-specific power. The intelligent driver model was first modified to simulate the ACC system and it was calibrated by using empirical traffic data. Then, a five-step procedure based on the vehicle-specific power was introduced to calculate fuel efficiency. Five scenarios with different ACC ratios were tested in simulation experiments, and sensitivity analyses of two key ACC factors affecting the perception-reaction time and time headway were also conducted. The simulation results indicate that all the scenarios with ACC vehicles have positive impacts on reducing fuel consumption. Furthermore, from the perspective of fuel efficiency, the extremely small value of the perception-reaction time of the ACC system is not necessary due to the fact that the value of 0.5 and 0.1 s can almost lead to the same reduction in fuel consumption. Finally, the designed time headway of the ACC system is also proposed to be large enough for fuel efficiency, although its small value can increase capacity. The findings of this study provide useful information for connected vehicles and autonomous vehicle manufacturers to improve fuel efficiency on roadways.

Adiabatic cooling for cold polar molecules on a chip using a controllable high-efficiency electrostatic surface trap

We propose a controllable high-efficiency electrostatic surface trap for cold polar molecules on a chip by using two insulator-embedded charged rings and a grounded conductor plate. We calculate Stark energy structure pattern of ND3 molecules in an external electric field using the method of matrix diagonalization. We analyze how the voltages that are applied to the ring electrodes affect the depth of the efficient well and the controllability of the distance between the trap center and the surface of the chip. To obtain a better understanding, we simulate the dynamical loading and trapping processes of ND3 molecules in a ｜J, KM = ｜1,-1 state by using classical Monte–Carlo method. Our study shows that the loading efficiency of our trap can reach ～ 88%. Finally, we study the adiabatic cooling of cold molecules in our surface trap by linearly lowering the potential-well depth（i.e., lowering the trapping voltage）, and find that the temperature of the trapped ND3 molecules can be adiabatically cooled from 34.5 m K to ～ 5.8 m K when the trapping voltage is reduced from-35 k V to-3 k V.

Efficiency of a blue organic light-emitting diode enhanced by inserting charge control layers into the emission region

We demonstrate high current efficiency of a blue fluorescent organic light-emitting diode （OLED） by using the charge control layers （CCLs） based on Alq3 . The CCLs that are inserted into the emitting layers （EMLs） could impede the hole injection and facilitate the electron transport, which can improve the carrier balance and further expand the exciton generation region. The maximal current efficiency of the optimal device is 5.89 cd/A at 1.81 mA/cm2 , which is about 2.19 times higher than that of the control device （CD） without the CCL, and the maximal luminance is 19.660 cd/m2 at 12V. The device shows a good color stability though the green light emitting material Alq3 is introduced as the CCL in the EML, but it has a poor lifetime due to the formation of cationic Alq3 species.

Influence of Post Emergence Application of Glyphosate on Weed Control Efficiency and Yield of Transgenic Maize

Field experiment was conducted during kharif 2009 and rabi 2009-2010 at Tamil Nadu Agricultural University, Coimbatore to evaluate the weed control efficiency and yield potential of glyphosate resistant transgenic maize. Treatments consisted of two transgenic maize hybrids named Hishell and 900 M gold with application of glyphosate as post emergence at 900, 1800 and 3600 g a.e/hathese were compared with non-transgenic counterpart maize hybrids with application of atrazine as pre-emergence at 0.5 kg/ha followed by one hand weeding at 40 Days After Sowing along with need based insect control practices. Post emergence application of glyphosate at 900, 1800 and 3600 g a.e/ha in transgenic maize hybrids was recorded with lower weed density and higher weed control efficiency compared to other treatments. Higher grain yield was recorded with post emergence application of glyphosate at 1800 g a.e/ha in transgenic hybrid 900 M Gold and 3600 g a.e/ha in transgenic hybrid Hishell during kharif 2009 and rabi 2009-2010 seasons, respectively.

Function of controlled release fertilizer in maintaining high agronomic use efficiency and minimizing environmental pollution in rice field of southern China

Development and use of controlled release fertilizer (CRF) in southern China, potential advantages of CRF in increasing rice yield and nutrient use efficiency were introduced, as well as its role of minimizing rice field’s environmental contamination was discussed. Meanwhile, some suggestions were proposed.

Effects of controlled-release urea application on the growth, yield and nitrogen recovery efficiency of cotton

Field experiments were conducted to study the effects of the controlled release urea (CRU) application on growth yield and nitrogen recovery efficiency of cotton in the main cotton zone of the Yangtze River basin in 2010. Different nitrogen levels were set in order to determine the suitable dosage of CRU on cotton. The special purpose was to provide evidence for the CRU application in cotton fields. The results show that the application of CRU promotes the growth of cotton significantly and enhances the nitrogen supply in the whole period. Compared to the treatment with total N as base fertilizer (UB), the bod, flower, little bolls and total bolls are increased significantly. There are no significant differences in the yield between the CRU treatment and the treatment of controlled release urea and urea combined application (60%CRU + 40%U), but an increase by 12.38%-22.67% compared to the UB treatment, and an increase by 4.49%-7.23% compared to the treatments of total N split application (UD). The nitrogen uptake of CRU treatment was significantly increased by 13.01%-48.32% and 30.27%-13.01% than UB treatment and UD treatment, respectively. The nutrient recovery efficiency of CRU treatment is increased by 16.42-20.59, 5.92-11.29 and 4.22-12.59 percentage points compared to the UB treatment, UD treatment and 60%CRU + 40%U treatment, respectively. In this study, there was a good linearity relationship between the cotton yield and amount of CRU in Wuxue site. The yield of cotton response to amount of CRU could be described by the model of linear plus plateau in Jingzhou site.