AN EFFICIENT FINITE-DIFFERENCE ALGORITHM FOR COMPUTING AXISYMMETRIC TRANSONIC NACELLE FLOW FIELDS

A finite difference method for computing the axisymmetric, transonic flows over a nacelle is presented in this paper. By use of the conservative full-potential equation, body-fitted grid, and the exact boundary conditions, a new AF scheme is constructed according to the criterion of optimum convergence. The proposed scheme has been applied to transonic nacelle flow problems. Computation for several nacelles shows the rapid convergence of this scheme and excellent agreement with the experimental results.

Experimental Study on Vortex-Induced Vibration of Marine Riser Model with Coupling Interference Effect Under Combined Internal and External Flow

A partition model of interference efficiency was constructed to study the coupling interference effect under combined internal and external flow.The concept of“internal flow efficiency”,“velocity ratio”and“interference efficiency”were introduced to quantify the effect of internal flow and interference,and reveal the coupling mechanism among internal flow,external flow and interference effect.The results showed that the dynamic response of risers under variable angles was significantly different after considering the effect of internal flow.When the external flow velocity was smaller than 0.25 m/s,the vibration of risers was promoted by the internal flow.With the increase of external flow velocity,the effect of internal flow was weakened and the dynamic response of riser mainly depended on the external flow and interference effect.Under the effect of different internal flow,the interference efficiency had similar change trend.The interference effect amplified the complex secondary flow effect inside the riser,making the dynamic response of riser complex and random.In this paper,the overlap area and subdivision criterion of interference effect were constructed within the range of experimental velocity ratio,and the change curve of interference efficiency was obtained with an average meaning,which may have important practical meaning.

Numerical simulation of the flow field of a flat torque converter

A flexible flat torque converter was proposed to fulfill the requirement of miniaturization and power density maximization for automobiles.Constructed by two arcs joined by lines,the torus was designed directly from design path.The influence of flatness on the performance of the torque converter was evaluated.The software CFX and standard k-ε model were adopted to simulate the internal flow fields of the torque converter under different flatness ratios.The results indicated that the performance of the torque converter got worse as the flatness declined,but the capacity of pump increased.The efficiency and the torque ratio dropped slightly as the flatness ratio decreased.So the torque converter could be squashed appropriately to get high power density without too much efficiency sacrifice.But when the flatness ratio was below 0.2,there was a significant drop in the efficiency.

Experimental study on the goaf flow field of the ‘‘U+I” type ventilation system for a comprehensive mechanized mining face

＂U＂ and ＂U＋I＂ type ventilation experiments were performed on a three-dimensional fully mechanized caving face simulation experimental platform. The distribution laws of the pressure field and gas field in the mine goal were obtained. Results show that the flow field in the goaf is generally asymmetric; the location of the gas accumulation area changes with ventilation parameters and can be used as an evaluation indicator to study the air leakage extent in the goal. Hence, drainage pipes buried in the goaf to intensively extract gas can be designed in such gas areas, which can give considerations in both improving gas drainage efficiency and reducing air leakage. By comparing the gas extraction effect of model experiments with that of on-site underground practices, the basic laws are commonly consistent according to comparative analysis. Thus the experimental results can be used to guide the application of underground gas prevent!o_n_and.control..

Effects of a flexible net barrier on the dynamic behaviours and interception of debris flows in mountainous areas

Flexible net barriers are a new type of effective mitigation measure against debris flows in valleys and can affect the kinematic energy and mass of debris flows. Here, ten flume tests were performed to study the dynamic behaviours of debris flows with differences in volumes, concentrations(solid volume fraction), and travel distances after interception by a uniform flexible net barrier. A high-speed camera was used to monitor the whole test process, and their dynamic behaviours were recorded. A preliminary computational framework on energy conversion is proposed according to the deposition mechanisms and outflow of debris flow under the effects of the flexible net barrier. The experimental results show that the dynamic interaction process between a debris flow and the flexible net barrier can be divided into two stages:(a) the two-phase impact of the leading edge of the debris flow with the net and(b) collision and friction between the body of the debris flow and intercepted debris material. The approach velocity of a debris flow decreases sharply(a maximum of 63%) after the interception by the net barrier, and the mass ratio of the debris material being intercepted and the kinetic energy ratio of the debris material being absorbed by the net barrier are close due to the limited interception efficiency of the flexible net barrier, which is believed to be related to the flexibility. The energy ratio of outflow is relative small despite the large permeability of the flexible net barrier.

Fourier time spectral method for subsonic and transonic flows

The time accuracy of the exponentially accurate Fourier time spectral method（TSM） is examined and compared with a conventional 2nd-order backward difference formula（BDF） method for periodic unsteady flows. In particular, detailed error analysis based on numerical computations is performed on the accuracy of resolving the local pressure coefficient and global integrated force coefficients for smooth subsonic and non-smooth transonic flows with moving shock waves on a pitching airfoil. For smooth subsonic flows, the Fourier TSM method offers a significant accuracy advantage over the BDF method for the prediction of both the local pressure coefficient and integrated force coefficients. For transonic flows where the motion of the discontinuous shock wave contributes significant higherorder harmonic contents to the local pressure fluctuations,a sufficient number of modes must be included before the Fourier TSM provides an advantage over the BDF method.The Fourier TSM, however, still offers better accuracy than the BDF method for integrated force coefficients even for transonic flows. A problem of non-symmetric solutions for symmetric periodic flows due to the use of odd numbers of intervals is uncovered and analyzed. A frequency-searching method is proposed for problems where the frequency is not known a priori. The method is tested on the vortex shedding problem of the flow over a circular cylinder.

GD-B型自锁腔CO_2激光手术刀设计原理

本文简介由“谐振腔可自锁的CO_2激光器”,“激光输出功率可在3-40W连续调节的稳流系统”和“高效激励电源”等组成的《GD-B型自锁腔CO_2激光手术刀》的设计原理和工作特性。

Amenability to dry processing of high ash thermal coal using a pneumatic table

High ash thermal coal from India was used to conduct the dry processing of fine coal using a pneumatic table to evolve a techno-economically novel technique. The fine as-received sample having 55.2g ash was subjected to washability studies at variant densities from 1.4 to 2.2 to assess the amenability to separa- tion. The experiments were conducted using a central composite design for assessing the interactive effects of the variable parameters of a pneumatic table on the product yield and ash content. The performance of the pneumatic table was analyzed in terms of clean coal yield, recovery of combustibles, separation efficiency （Esp） and useful heat value of clean coal. The combustibles of clean coal obtained through a single stage operation at 35% and 38.7% ash were 40% and 63% respectively. However, the two stage processing was more effective in reducing the ash content in the clean coal. The rougher concentrate generated at higher ash level was subsequently processed in different conditions at 35% ash level, and 58g combustibles could be recovered. Hence, two stage processing increases the combustibles by 18 units and the useful heat value of clean coal increases from 1190 kcal/kg to 3750 kcal/kg.

AN IMPROVED EFFICIENT SEMI-IMPLICIT FINITE ELEMENT SCHEME FOR TWO-DIMENSIONAL TIDAL FLOW COMPUTATIONS

In a recent paper, an efficient semi-implicit finite element scheme for 2-dimensional tidal flow computations is proposed. In that scheme, each term of the governing equations, rather than each dependent variable, is ex- panded in terms of the unknown nodal values. Simpson's rule ix used for numerical integration to make the mass matrix diagonal. The friction terms are represented semi-implicitly to improve stability, but no additional compu- tational effort is required. The shortcomings of this scheme are that the time-stepping scheme is only first-order ae- curate and artificial smoothing is required to control the numerical noise. In this paper, the previous scheme is im- proved by including the eddy viscosity terms in the governing equations to replace artificial smoothing in noise con- trol and the time-stepping scheme is modified to make it second-order accurate. These improvements can be achieved with only a slight increase in computational effort. The test cases used previously to validate the former scheme are again employed to test the present scheme.

Effect of wettability of ceramic proppant surface in guar gum solution on the oil flow efficiency in fractures

Guar gum and its derivatives have been the most commonly used polymers to increase the viscosity of fracture fluids.Ceramic proppants are vital products for enhancing oil and gas well productivity in low-permeability reservoirs.In the last several decades,abundant studies have been found in the investigation of proppant size,shape,compositions on the fracture conductivity.However,few types of research can be found to study the proppant wettability effect on the oil and gas flow efficiency.In our research,eight experiments were conducted using traditional guar gum fracturing fluid.Results of this work indicated that ceramic proppant promotes oil flow efficiency from sandstone core samples to proppant packs and thus should promote oil well productivity.The mechanism behind this phenomenon is believed to be the formation of oil flow channels across the fracture face due to the imbibition of oil in the core onto the oil-wet surface of the proppant,promoting oil flow from the core to the fracture.After guar gum was added the results inverted,this phenomenon for water-wet proppant is believed to be increased by the viscosity of fracture fluids which increased the viscosity of water,promoting oil flow from the core to the fracture.Nevertheless,the stimulation effect of oil-wet proppant on oil flow efficiency can be reduced by the presence of guar gum solution.Inside the proppant matrix filled with guar gum fracturing fluid,oil can be blocked inside the proppant matrix as a discontinuous phase while the aqueous phase can be easily mixed with the guar gum fluid and then be transferred out.