Theoretical and numerical investigation of HF elastic wave propagation in two-dimensional periodic beam lattices

The elastic wave propagation phenomena in two-dimensional periodic beam lattices are studied by using the Bloch wave transform. The numerical modeling is applied to the hexagonal and the rectangular beam lattices, in which, both the in-plane （with respect to the lattice plane） and out-of-plane waves are considered. The dispersion relations are obtained by calculating the Bloch eigenfrequencies and eigenmodes. The frequency bandgaps are observed and the influence of the elastic and geometric properties of the primitive cell on the bandgaps is studied. By analyzing the phase and the group velocities of the Bloch wave modes, the anisotropic behaviors and the dispersive characteristics of the hexagonal beam lattice with respect to the wave prop- agation are highlighted in high frequency domains. One im- portant result presented herein is the comparison between the first Bloch wave modes to the membrane and bend- ing/transverse shear wave modes of the classical equivalent homogenized orthotropic plate model of the hexagonal beam lattice. It is shown that, in low frequency ranges, the homog- enized plate model can correctly represent both the in-plane and out-of-plane dynamic behaviors of the beam lattice, its frequency validity domain can be precisely evaluated thanks to the Bloch modal analysis. As another important and original result, we have highlighted the existence of the retro- propagating Bloch wave modes with a negative group veloc- ity, and of the corresponding ＂retro-propagating＂ frequency bands.

Effect of negative permeability on elastic wave propagation in magnetoelastic multilayered composites

With the advent of left-handed magnetic materials, it is desirable to develop high-performance wave devices based on their novel properties of wave propagation. This letter reports the special properties of elastic wave propagation in magnetoelastic multilayered composites with negative permeability as compared to those in counterpart structures with positive permeability. These novel properties of elastic waves are discerned from the diversified dispersion curves, which represent the propagation and attenuation characteristics of elastic waves. To compute these dispersion curves, the method of reverberation-ray matrix is extended for the analysis of elastic waves in magnetoelastic multilayered composites. Although only the results of a single piezomagnetic and a binary magnetoelastic layers with mechanically free and magnetically short surfaces as well as perfect interface are illustrated in the numerical examples, the analysis is applicable to magnetoelastic multilayered structures with other kinds of boundaries/interfaces.

Finite element equations and numerical simulation of elastic wave propagation in two-phase anisotropic media

Based on Biot theory of two-phase anisotropic media and Hamilton theory about dynamic problem,finite element equations of elastic wave propagation in two-phase anisotropic media are derived in this paper.Numerical solution of finite element equations is given.Finally,Properties of elastic wave propagation are observed and analyzed through FEM modeling.

Elastic Wave Propagation in Lattice Metamaterials with Koch Fractal

In this study,the wave propagation properties of lattice metamaterials with Koch fractal structures are investigated in terms of band structures and directional wave propagation.The analytical models of lattice metamaterials are established using the finite element method,and the dispersion relation is solved using the Bloch’s theorem.The band structures of the lattice metamaterials with different numbers of iterations are studied,and the group velocities at a selected frequency are calculated to analyze the directional wave propagation characteristics.Furthermore,dynamic responses of the finite structures are calculated using commercial finite element software to verify the band gaps and directional wave propagation behaviors in the lattice metamaterials.The results show that multiple and low band gaps are present in the lattice materials with various geometric parameters of the Koch fractal,and the position of the lowest band gap decreases as the number of iterations increases.The results indicate the potential applications of lattice metamaterials with Koch fractals for vibration isolation and multi-functional design.

PROPAGATION VELOCITIES OF ELASTIC WAVES IN SATURATED SOILS

Bused on the wave equations established by the authors, the characteristics of propagation velocities of elastic vaves in saturated soils arc analyzed and verified by ultrasonic test in laboratory and seismic survey in the field. The results provide theoretical basis for the determination of physical and mechanical parameters of saturated soils using propagation velocities of elastic waves. especially P-wave Velocity.

Symplectic analysis for wave propagation in one-dimensional nonlinear periodic structures

The wave propagation problem in the nonlinear periodic mass-spring structure chain is analyzed using the symplectic mathematical method. The energy method is used to construct the dynamic equation, and the nonlinear dynamic equation is linearized using the small parameter perturbation method. Eigen-solutions of the symplectic matrix are used to analyze the wave propagation problem in nonlinear periodic lattices. Nonlinearity in the mass-spring chain, arising from the nonlinear spring stiffness effect, has profound effects on the overall transmission of the chain. The wave propagation characteristics are altered due to nonlinearity, and related to the incident wave intensity, which is a genuine nonlinear effect not present in the corresponding linear model. Numerical results show how the increase of nonlinearity or incident wave amplitude leads to closing of transmitting gaps. Comparison with the normal recursive approach shows effectiveness and superiority of the symplectic method for the wave propagation problem in nonlinear periodic structures.

An elastic electrode model for wave propagation analysis in piezoelectric layered structures of film bulk acoustic resonators

Wave propagation in a piezoelectric layered structure of a film bulk acoustic resonator （FBAR/ is studied. The accurate results of dispersion relation are calculated using the proposed elastic electrode model for both electroded and unelectroded layered plates. The differences of calculated cut-off frequencies between the current elastic electrode model and the simplified inertial electrode model （often used in the quartz resonator analysis） are illustrated in detail, which shows that an elastic electrode model is indeed needed for the accurate analysis of FBAR. These results can be used as an accurate criterion to calibrate the 2-D theoretical model for a real finite-size structure of FBAR.

Propagation of elastic plane waves in homogeneous and transversely isotropic media

Solutions to the equation of waves motion are derived for homogeneous and transversely isotropic media such as fiber-reinforced composites, and three dimensional slowness surfaces are shown as well. A brief discussion on the propagation of plane waves is given.Elastic plane waves are characterized by slowness vectors, wave vectors, polarization vectors and group velocity vectors, etc. The results obtained are presented in a coordinate-free form due to the introduction of the crystal axis' orieniation vector which specifies the anisotropy of the media. Therefore, the results are the most general and convenient for further application

Propagation of elastic waves in a plate with rough surfaces

The characteristics of Lamb wave propagating in a solid plate with rough surfaces are studied on the basis of small perturbation approximation. The Rayleigh-Lamb frequency equation expressed with SA matrix is presented. The Rayleigh-Lamb frequency equation for a rough surface plate is different from that for a smooth surface plate, resulting in a small perturbation △k on Lamb wave vector k. The imaginary part of △k gives the attenuation caused by wave scattering. An experiment is designed to test our theoretical predications. By using wedge-shape pipes, different Lamb wave modes are excited. The signals at different positions are received and analyzed to get the dispersion curves and attenuations of different modes. The experimental results are compared with the theoretical predications.

A lumped mass Chebyshev spectral element method and its application to structural dynamic problems

A diagonal or lumped mass matrix is of great value for time-domain analysis of structural dynamic and wave propagation problems,as the computational efforts can be greatly reduced in the process of mass matrix inversion.In this study,the nodal quadrature method is employed to construct a lumped mass matrix for the Chebyshev spectral element method(CSEM).A Gauss-Lobatto type quadrature,based on Gauss-Lobatto-Chebyshev points with a weighting function of unity,is thus derived.With the aid of this quadrature,the CSEM can take advantage of explicit time-marching schemes and provide an efficient new tool for solving structural dynamic problems.Several types of lumped mass Chebyshev spectral elements are designed,including rod,beam and plate elements.The performance of the developed method is examined via some numerical examples of natural vibration and elastic wave propagation,accompanied by their comparison to that of traditional consistent-mass CSEM or the classical finite element method(FEM).Numerical results indicate that the proposed method displays comparable accuracy as its consistent-mass counterpart,and is more accurate than classical FEM.For the simulation of elastic wave propagation in structures induced by high-frequency loading,this method achieves satisfactory performance in accuracy and efficiency.

EXACT SOLUTION FOR A TWO-DIMENSIONAL LAMB'S PROBLEM DUE TO A STRIP IMPULSE LOADING

By applying the integral transform method and the inverse transformation technique based upon the two types of integration, the present paper has successfully obtained an exact algebraic solution for a two-dimensional Lamb＇s problem due to a strip impulse loading for the first time. With the algebraic result, the excitation and propagation processes of stress waves, including the longitudinal wave, the transverse wave, and Rayleigh-wave, are discussed in detail. A few new conclusions have been drawn from currently available integral results or computational results.

Torsional wave in a circular micro-tube with clogging attached to the inner surface

In the present paper, we study the torsional wave propagation along a micro-tube with clog- ging attached to its inner surface. The clogging accumulated on the inner surface of the tube is modeled as an ＂elastic membrane＂ which is described by the so-called surface elasticity. A power-series solution is particularly developed for the lowest order of wave propagation. The dispersion diagram of the lowest-order wave is numerically presented with the surface （clogging） effect.

Bandgap Analysis of Periodic Composite Microplates with Curvature-Based Flexoelectricity:A Finite Element Approach

A finite element model is proposed permitting prediction of elastic wave bandgaps of periodic composite microplates incorporating flexoelectric effect.In this model,we applied curvature-based flexoelectricity and Mindlin plate theories and derived a finite element formulation that has been implemented for bandgap analysis.The finite element model utilizes a three-node triangle element with 30 degrees of freedom satisfying Mindlin kinematics assumptions.It is based on a non-conforming interpolation scheme which provides nodal C^(1) continuity and ensures compatibility with curvature-based flexoelectricity.The approach accounts for microstructure effects and,owing to the triangular element topology,can be used to assist the design of microplates with complex microstructures.Validation of the approach is performed through comparison with both analytical and numerical models,in which the effect of flexoelectricity on the bandgap is studied based on cases demonstrating size dependence.