The Challenges in Electrical and Electronic Technology Courses in Vocational Colleges

This paper addresses the challenges in the teaching of electrical and electronic technology in higher vocational colleges and proposes specific countermeasures to improve teaching quality and effectiveness.The countermeasures include optimizing teaching content,emphasizing practical application and innovation,innovating teaching methods,introducing modern instructional approaches,strengthening the teaching team,enhancing teacher quality and practical expertise,upgrading experimental equipment and facilities,enriching curriculum resources,and incorporating digital teaching materials.These measures aim to cultivate high-quality skilled talents,promote social and economic development,and enhance national competitiveness.By adjusting the course structure,incorporating real-world industry cases,and fostering collaboration with enterprises,students can better understand and apply electrical and electronic technology.The introduction of project-based teaching,flipped classrooms,and multimedia technology can enhance student engagement and facilitate independent learning.Furthermore,the improvement of experimental resources and the establishment of online teaching platforms can enhance students’practical skills and provide a variety of learning resources.These measures contribute to the overall improvement of electrical and electronic technology teaching in higher vocational colleges.

Teaching Design and Implementation of the Electrical and Electronic Technology Course Based on Teaching Ability Competition

The teaching ability competition is a vital method for stimulating teachers’enthusiasm and enhancing their teaching skills.This approach has gained increasing attention from colleges and universities in recent years.The competition focuses on evaluating teachers’capabilities in designing and implementing lessons,encouraging the exchange of new educational ideas and high-quality teaching methods.Reforming the teaching of Electrical and Electronic Technology courses based on insights from teaching competitions can significantly improve teaching quality.This paper explores the teaching design and implementation of the Electrical and Electronic Technology course,drawing on the principles of teaching ability competitions.First,it analyzes the existing problems in teaching this course.Then,it highlights the significant benefits that teaching competitions bring to the course.Based on these insights,the paper proposes practical strategies aimed at enhancing students’interest and practical skills,thereby promoting innovative developments in teaching Electrical and Electronic Technology.

Recovery of Metals from Anodic Dissolution Slime of Waste from Electric and Electronic Equipment（WEEE） by Extraction in Ionic Liquids

The recovery of metals from a multi-component alloy obtained by crushing, melting and anodic dissolution of waste from electric and electronic equipment（WEEE） was investigated. The anodic dissolution of the alloy was carried out in an electrolysis cell with one copper cathode and a central cast anode, immersed in the electrolyte formed by choline chloride-ethylene glycol-iodine. The temperature of the electrolyte during the process was 343 K. Depending on the electrolysis parameters（current density and cell voltage）, cathodic deposits of Sn, Pb and Zn of 〉99% purity were obtained. Cyclic voltammetry was used in order to determine the deposition potentials of the studied metals. The obtained metallic deposits were subject of determination of XRD, SEM/EDX and AFM in order to evidence the deposits structure and morphology. The experiments performed demonstrated the possibility of separating/selective recovery of metals from the multi-component alloy resulted from the waste from electrical and electronic equipment by anodic dissolution in ionic liquids.

Electrical and Electronic Waste in Northwest Mexico

The waste derived from Electrical and Electronic Equipment (WEEE) is of interest now worldwide, in some countries due to the rapid technological development and in others due to technological dependence through the acquisition of second hand equipment. Therefore it is necessary to implement strategies for the sustainable management of electrical and electronic equipment at the end of its useful life. This paper presents the results of an investigation that was conducted in a city located in the Northwest of Mexico, which seeks to understand the management practices of household WEEE generators. A survey was applied to a representative sample of the population with a confidence level of 90%. Six home appliances were quantified and it was found that approximately 21% of them are disposed directly as part of the household flow of Municipal Solid Waste (MSW), while 79% are storage for a latter sale, repair or reuse. The results obtained support the need to develop evaluations and to implement possible scenarios for the sustainable management of Electrical and Electronic Waste.

Review of Electrical and Electronic Architectures for Autonomous Vehicles:Topologies,Networking and Simulators

With the rapid development of autonomous vehicles,more and more functions and computing requirements have led to the continuous centralization in the topology of electrical and electronic(E/E)architectures.While certain Tier1 suppliers,such as BOSCH,have previously proposed a serial roadmap for E/E architecture development,implemented since 2015 with significant contributions to the automotive industry,lingering misconceptions and queries persist in actual engineering processes.Notably,there are concerns regarding the perspective of zone-oriented E/E architectures,characterized by zonal concentration,as successors to domain-oriented E/E architectures,known for functional concentration.Addressing these misconceptions and queries,this study introduces a novel parallel roadmap for E/E architecture development,concurrently evaluating domain-oriented and zone-oriented schemes.Furthermore,the study explores hybrid E/E architectures,amalgamating features from both paradigms.To align with the evolution of E/E architectures,networking technologies must adapt correspondingly.The networking mechanisms pivotal in E/E architecture design are comprehensively discussed.Additionally,the study delves into modeling and verification tools pertinent to E/E architecture topologies.In conclusion,the paper outlines existing challenges and unresolved queries in this domain.

Companies’ E-waste Estimation Based on General Equilibrium The­ory Context and Random Forest Regression Algorithm in Cameroon: Case Study of SMEs Implementing ISO 14001:2015

Given the challenge of estimating or calculating quantities of waste electrical and electronic equipment(WEEE)in developing countries,this article focuses on predicting the WEEE generated by Cameroonian small and medium enterprises(SMEs)that are engaged in ISO 14001:2015 initiatives and consume electrical and electronic equipment(EEE)to enhance their performance and profitability.The methodology employed an exploratory approach involving the application of general equilibrium theory(GET)to contextualize the study and generate relevant parameters for deploying the random forest regression learning algorithm for predictions.Machine learning was applied to 80%of the samples for training,while simulation was conducted on the remaining 20%of samples based on quantities of EEE utilized over a specific period,utilization rates,repair rates,and average lifespans.The results demonstrate that the model’s predicted values are significantly close to the actual quantities of generated WEEE,and the model’s performance was evaluated using the mean squared error(MSE)and yielding satisfactory results.Based on this model,both companies and stakeholders can set realistic objectives for managing companies’WEEE,fostering sustainable socio-environmental practices.

Comparative studies on hydrometallurgical treatment of smelted low-grade electronic scraps for selective copper recovery

A comparison of three hydrometallurgical methods for selective recovery of copper from low-grade electric and electronic wastes was reported. Scraps were smelted to produce Cu？Zn？Sn？Ag alloy. Multiphase material was analyzed by SEM？EDS and XRD. The alloy was dissolved anodically with simultaneous metal electrodeposition using ammoniacal and sulfuric acid solutions or leached in ammonia？ammonium sulfate solution and then copper electrowinning was carried out. This resulted in the separation of metals, where lead, silver and tin accumulated mainly in the slimes, while copper was transferred to the electrolyte and then recovered on the cathode. The best conditions of the alloy treatment were obtained in the sulfuric acid, where the final product was metal of high purity （99% Cu） at the current efficiency of 90%. Ammoniacal leaching of the alloy led to the accumulation of copper ions in the electrolyte and further metal electrowinning, but the rate of the spontaneous dissolution was low. Anodic dissolution of the alloy in the ammonia？ammonium sulfate solution led to the unfavorable distribution of metals among the slime, electrolyte and cathodic deposit.

Contamination and Remediation of Heavy Metals in Soils near E-waste Recycling Area

In order to assess heavy metals pollution in agricultural soil after renovation in typical e-waste recycling areas, 212 soil samples were col- lected and the mass fractions of 7 kinds of heavy metals （Cd, Cr, Cu, Hg, Ni, Pb and Zn） were analyzed. The results indicated that heavy metals pollution in agricultural soil was commonly existed in the study areas, and the soil was slightly contaminated by Pb but was moderately or critically polluted by Cd and Cu. However, the carcinogenic risk and non-carcinogenic risk status by heavy metals pollution were beyond acceptable levels, and soil remediation was quite necessary. After some investigations of bioremediation, we found that saponin as washing agent could highly strenqthen the behavior of heavy metals desorption from soil ,which had a good prospect of engineering practice.

Managing economic and social profit of cooperative models in three-echelon reverse supply chain for waste electrical and electronic equipment

In addition to maximizing economic benefits, reverse supply chains should further seek to maximize social benefits by increasing the quantity of waste electrical and electronic equipment （WEEE）. The paper investigates cooperative models with different parties in a three-echelon reverse supply chain for WEEE consisting of a single collector, a single remanufacturer, and two retailers based on complete information. In acldition, the optimal decisions of four cooperative models and the effect of the market demand of remanufactured WEEE products and the market share of two retailers on the optimal decisions are discussed. The results indicate that optimal total channel profit and recycle quantity in a reverse supply chain are maximized in a centralized model. The optimal total channel profit and recycle quantity increase with an increase in the market demand of remanufactured WEEE products. The three-echelon reverse supply chain consisting of duopolistic retailers maximizes total channel profit and recycle quantity in a reverse supply chain fbr WEEE.

Recovery of Transient Signals in Noise by OptimalThresholding in Wavelet Domain

：研究用离散子波变换复原被加性高斯白噪声污染的瞬态信号．在子波域中提出了一种最佳门限方法，该方法涉及到对于波系数的假设检验，利用似然比、奈曼，皮尔逊准则和最小均方差设计该门限，计算机仿真证明，该方法在较低信噪比下复原信号的有效性．

Methodology for Precious Metal Recovery in Computer Printed Circuit

The life of electronic equipment is becoming increasingly shorter and its replacement always generates a quantity of waste increase, giving rise to a problem of environmental character and still needed new options of solid waste management that will contribute to global sustainable development. Parts of these waste are TCI （the card＇s printed circuit） which containing dangerous elements and turns them into a polluting material from the soil, water and air, being harmful to human health if there is to proper and responsible way, so the recycling of TCI to obtain precious metals is an example of industrial materials that can be recycled. Despite this, large quantities of these are not recycled and some others are not considered. The objective of this work is to present a systematic and ecological methodology for the recovery of valuable materials contained in parts of used in computers, circuit boards using a leaching process. The method determines a set of variables to evaluate the kinetics of the reaction and the leaching of metals that form the substrate of metal and to establish the parameters that affect the rate of leaching of metals through a sensitivity analysis, to identify design alternatives. It determines the quantity and percentages that constitutes the motherboard, processor, video cards, accelerator graphics, network and memory cards RAM, among others and its content of metals such as Cu, Fe, Ag, Au and Pt.

Importance of Life Cycle Analysis of the Printed Circuit Board Computer

It is estimated that there is a generation of 307,224 ton/year [1] of waste from electronic and electronic equipment (WEEE) in Mexico, of which 10% is recycled, 40% remains stored and 50% reaches landfills or uncontrolled dumps. In the practice, even the regulatory instruments are not consolidated and the adequate management of the use of WEEE management, so the aim of this study is an analysis of life cycle of printed circuit boards (TCI) to identify the management alternatives that represent the least impact to the environment. This assessment was carried out using software SIMAPRO to determine the environmental impact of each scenario, through the comparison of impacts and the proposed improvements to reduce it, following phases of this methodology by applying standards, ISO 14040/ISO 14044 [2], using data from the INE official reports since 2006 until 2010 which concentrate the information of the WEEE problem in Mexico. These data were pooled to carry out inventories according to the availability in the information, identifying the environmental impacts generated by processing. The conclusions of the LCA will serve to identify the stage with greater environmental impact, and thus propose ideas for improvement in order to minimize this impact.

Spatiotemporal dynamics of city-level WEEE generation from different sources in China

China stands as one of the leading producers of waste electrical and electronic equipment(WEEE),facing significant challenges in managing the substantial volumes generated.Despite existing regulations,the informal treatment of WEEE persists in some areas due to inadequate recycling networks at the city level.Consequently,there is a critical need for a detailed geographical mapping of WEEE generation to address improper disposal practices effectively.This study introduces the cMAC–EEEs(city Material Cycles and Manufactured Capital–EEEs)database,providing estimates of WEEE generation across approximately 300 prefecture-level cities from 1978 to 2017.It focuses on five commonly used types of electrical and electronic equipment(refrigerators,air conditioners,washing machines,computers,TVs)originating from three key sources(urban residents,rural residents,enterprises).The findings reveal(1)significant spatial variation in WEEE generation within China,with eastern and central city clusters identified as hotspots,particularly for urban residents and enterprises,while the western region exhibits the highest growth rate in WEEE generation,notably among rural residents.(2)The growth in obsolete computers and air conditioners is prominent,especially in rural areas and among enterprises,whereas the generation of obsolete TVs,washing machines,and refrigerators is leveling off and expected to decrease in some urban areas.(3)Enterprises account for a substantial portion of WEEE generation,though uncertainties exist,necessitating further refinement.The study highlights that less developed regions lack adequate recycling facilities,with specific limitations in refrigerators and air conditioners recycling capabilities.To enhance WEEE management,it advocates for increased interregional collaboration and capacity building in less developed areas.Additionally,the regulation of WEEE from private enterprises requires improvement.At the product level,a greater focus on recycling practices for refrigerators and air conditioners is recommended.

An updated review and conceptual model for optimizing WEEE management in China from a life cycle perspective

Waste electrical and electronic equipment （WEEE） is a rapidly growing category of solid waste. China is now facing WEEE problems from both growing domestic generation and illegal imports. Currently, the amount of WEEE formally treated has increased steadily in China. The layout of the formal sector has been basically completed. Meanwhile, by controlling illegal disassembly activities, the informal sector has been gradually transformed to formal one. Beginning with the overview of the WEEE recycling industry in China, this paper first lists the latest progress in WEEE management from such aspects as the new edition of China RollS Directive （Restriction of Hazardous Substances Directive）, the updated WEEE Treatment List, the updated WEEE fund standard, the revised National Hazardous Waste List, and a brand-new plan on extended producer responsibility. In so doing, we elucidate the current challenges on WEEE management in detail： the imbalance between fund levies and subsidies, the gap in the supervision scope, the homogenization of recycling industry and the lack of life cycle approaches. Finally, a conceptual framework for integrated management of WEEE is proposed from a life cycle perspective. Overall, the life cycle management of WEEE includes three aspects： developing life cycle information for decision-making, implementing life cycle engineering with life cycle tools, and improving WEEE legislation based on life cycle thinking. By providing specific operating strategies, this life cycle framework should help to optimize WEEE management in developing countries where legislation is imperfect and the recycling system is relatively immature.

Review of In‑Vehicle Optical Fiber Communication Technology

With the continuous development of automotive intelligent networking and autonomous driving technologies,the number of in-vehicle electronic systems and applications is increasing rapidly.This change increases the amount of data to be transmitted in the vehicle and puts forward further requirements of higher speed and safety for in-vehicle communication.Traditional vehicle bus technologies are no longer sufficient to meet today’s high-speed transmission requirements,in which copper cables are used extensively,resulting in serious electromagnetic interference(EMI).Vehicle optical fiber communication technology,besides greatly improving the data transmission rate,has the advantages of anti-EMI,reducing cable space and vehicle mass.This paper first presents the motivation of applying vehicle optical fiber communication technology and reviews the development history of vehicle optical fiber communication technology.Then,the paper researches the devel-opment trend of automotive electrical and electronic architecture(EEA),from distributed EEA to domain centralized EEA and zone-oriented EEA.Based on the discussion of the development trend of automotive EEA,an EEA based on vehicle optical fiber communication technology is proposed.Finally,the key points and future directions of vehicle optical fiber communication technology research are highlighted,including vehicle multi-mode optical fiber technology,vehicle optical fiber network protocol,and topology.

Comparison on End-of-Life strategies of WEEE in China based on LCA

As the Electrical and Electronic Equipment （EEE） are upgraded more frequently in China, a large quantity of Waste Electrical and Electronic Equipment （WEEE） was and will be generated. It becomes an urgent issue to develop and adopt an effective End-of-Life （EoL） strategy for EEE in order to balance the resource recovery and environmental impacts. In an EoL strategy hierarchy for EEE, reuse strategy is usually deemed to be prior to materials recovery and other strategies. But in practice, the advantages and disadvantages of different strategies are always context-dependent. Therefore, main EoL strategies for EEE in China need to be evaluated in environment and resources aspects from the life cycle perspective. In this study, the obsolete refrigerator and Power Supply Unit （PSU） ofdesktop PC are both taken as the target products. Life Cycle Assessment （LCA） is applied to assess the environmental impacts of different EoL scenarios in China： Unit Reuse Scenario （URS）, Component Reuse Scenario （CRS） and Materials Recovery Scenario （MRS）. The LCA results show that the EoL strategies hierarchy is reasonable for the part＇of computer, bui not necessarily suitable for obsolete refrigerators. When the policy makers promote or demote one EoL strategy especially reuse, it is necessary to take subsequent impacts into consideration.

Pyrolysis of WEEE plastics using catalysts produced from fly ash of coal gasification

Catalytic pyrolysis of thermoplastics extracted from waste electrical and electronic equipment （WEEE） was investigated using various fly ash-derived catalysts. The catalysts were prepared from fly ash by a simple method that basically includes a mechanical treatment followed by an acid or a basic activation. The synthesized catalysts were characterized using various analytical techniques. The results showed that not treated fly ash （FA） is characterized by good crystallinity, which in turn is lowered by mechanical and chemical treatment （fly ash after mechanical and acid activation, FAMA） and suppressed almost entirely down to let fly ash become completely amorphous （fly ash al^er mechanical and basic activation FAMB）. Simultaneously, the surface area resulted increased. Subsequently, FA, FAMB and FAMA were used in the pyrolysis of a WEEE plastic sample at 400~C and their performance were compared with thermal pyrolysis at the same temperature. The catalysts principally improve the light oil yield： from 59 wt.% with thermal pyrolysis to 83 wt.% using FAMB. The formation of styrene in the oil is also increased： from 243 mg/g with thermal pyrolysis to 453 mg/g using FAMB. As a result, FAMB proved to be the best catalyst, thus producing also the lowest and the highest amount of char and gas, respectively.

Improvement potential of today＇s WEEE recycling performance： The case of LCD TVs in Belgium

Waste of electrical and electronic equipment （WEEE） constitutes one of the most relevant waste streams because of the quantity and presence of valuable materials. However, there is limited knowledge on the resource potential of urban mining WEEE, as data on material composition, and the efficiency of current recycling treatments are still scarce. In this article, an evaluationof the recycling performance at a national level for one of the fastest growing e-waste streams： LCD TVs is carried out through the following four steps. Firstly, material characterisation is performed by means of sampling of the waste stream. Secondly, a material flow analysis is conducted by evaluating the separation performance of a recycling plant in Belgium..Thirdly, the recovered economic value and avoided environmental impact （EI） of the analysed recycling system is assessed. Finally, the potential of urban mining for Belgium is forecasted. The analysis shows that while recycling performance for ferrous metals and aluminium are relatively high; there is substantial room to better close the material loops for precious metals （PM） and plastics. PMs and plastics account for 66 % of the economic value in LCD TVs and 57% of the El. With the current, commonly applied recycling technology only one-third of the PM and housing plastics are recycled; meaning that for＇these material＇s, at a national level for Belgium, there is a potential for improvement that represents 3.3 million euros in 2016 and 6.8 million euros in 2025.