The rising number of electronic control units （ECUs） in vehicles and the decreasing time to market have led to the need for advanced methods of calibration. A multi-ECU calibration system was developed based on the ...The rising number of electronic control units （ECUs） in vehicles and the decreasing time to market have led to the need for advanced methods of calibration. A multi-ECU calibration system was developed based on the explicit calibration protocol （XCP） and J1939 communication protocol to satisfy the need of calibrating multiple ECUs simultaneously. The messages in the controller area network （CAN） are defined in the J1939 protocol. Each CAN node can get its own calibration messages and information from other ECUs, and block other messages by qualifying the CAN messages with priority, source or destination address. The data field of the calibration message is designed with the XCP, with CAN acting as the transport layer. The calibration sessions are setup with the event-triggered XCP driver in the master node and the responding XCP driver in the slave nodes. Mirroring calibration variables from ROM to RAM enables the user to calibrate ECUs online. The application example shows that the multi-ECU calibration system can calibrate multiple ECUs simultaneously, and the main program can also accomplish its calculation and send commands to the actuators in time. By the multi-ECU calibration system, the calibration effort and time can be reduced and the variables in ECU can get a better match with the variables of other ECUs.展开更多
A hardware-in-the-loop simulating platform is developed to avoid designing defects caused by the complicated logical structure and multiple-functional buildup of the dectronic control unit（ECU）in modem diesel engine...A hardware-in-the-loop simulating platform is developed to avoid designing defects caused by the complicated logical structure and multiple-functional buildup of the dectronic control unit（ECU）in modem diesel engines, and to diminish potential damages on components or human exposure to dangers in R＆D en- deavor. This plat-form consists of a computer installed with software Matlab/Simulink/RTW and dSPACE/ ControlDesk; a diesel engine ECU, and a dSPACE autobox which runs a real-time diesel engine model. A typical model of diesel engine with turbocharger and intercooler is presented. Based on this model our research is carried out with a real ECU to test its software control strategies. Results show that by using the diesel engine model downloaded inside, the hardware-in-the-loop platform can simulate diesel engine＇s working conditions and generate all kinds of sensor signals which ECU needs on a real-time basis. So the ECU control strategies can be validated and relevant parameters roughly calibrated.展开更多
In this paper,we propose an improved torque sensorless speed control method for electric assisted bicycle,this method considers the coordinate conversion.A low-pass filter is designed in disturbance observer to estima...In this paper,we propose an improved torque sensorless speed control method for electric assisted bicycle,this method considers the coordinate conversion.A low-pass filter is designed in disturbance observer to estimate and compensate the variable disturbance during cycling.A DC motor provides assisted power driving,the assistance method is based on the realtime wheel angular velocity and coordinate system transformation.The effect of observer is proved,and the proposed method guarantees stability under disturbances.It is also compared to the existing methods and their performances are illustrated through simulations.The proposed method improves the performance both in rapidity and stability.展开更多
By means of circuit simulation, hardware of electronic control unit （ECU） of high pressure common-rail electronic control fuel system for diesel engine is designed. According to the system requirements for hardware ...By means of circuit simulation, hardware of electronic control unit （ECU） of high pressure common-rail electronic control fuel system for diesel engine is designed. According to the system requirements for hardware of ECU, signal-processing circuit of variable reluctance （VR） sensor, filter circuit for input signal, high voltage power circuit and driver and protection circuit of solenoid are simulated as emphases. Difficulties of wide scope of VR sensor output signal, efficiency of high voltage power and reliable and swift driver of solenoid are solved. The results of simulation show that the hardware meets the requirement of the fuel system. At the same time, circuit simulation can greatly increase quality of the design, alleviate design labor and shorten design time.展开更多
为了方便更新汽车电子控制单元(electronic control unit,ECU)的应用代码,针对汽车控制系统自身的特点,设计出汽车ECU在线升级系统。该升级系统利用车身控制器局域网络(controller area network,CAN),遵循诊断协议ISO15765,将ISO15765...为了方便更新汽车电子控制单元(electronic control unit,ECU)的应用代码,针对汽车控制系统自身的特点,设计出汽车ECU在线升级系统。该升级系统利用车身控制器局域网络(controller area network,CAN),遵循诊断协议ISO15765,将ISO15765诊断协议传输层和应用层规范应用于在线升级系统的上位机与ECU之间通信,实现对车身控制系统中各个ECU节点的在线更新应用代码功能。给出了该升级系统在STM8和XC167CI单片机的试验结果。试验证明,该升级系统不仅能够满足实际的代码更新要求,而且具有较强的通用性和可扩展性。展开更多
基金Supported by National Natural Science Foundation of China （61164013, U1334211, 51174091）, the Key Program of China Ministry of Railway （2011Z002-D）, and Natural Science Foundation of Jiangxi Province （20122BAB201021）
文摘The rising number of electronic control units （ECUs） in vehicles and the decreasing time to market have led to the need for advanced methods of calibration. A multi-ECU calibration system was developed based on the explicit calibration protocol （XCP） and J1939 communication protocol to satisfy the need of calibrating multiple ECUs simultaneously. The messages in the controller area network （CAN） are defined in the J1939 protocol. Each CAN node can get its own calibration messages and information from other ECUs, and block other messages by qualifying the CAN messages with priority, source or destination address. The data field of the calibration message is designed with the XCP, with CAN acting as the transport layer. The calibration sessions are setup with the event-triggered XCP driver in the master node and the responding XCP driver in the slave nodes. Mirroring calibration variables from ROM to RAM enables the user to calibrate ECUs online. The application example shows that the multi-ECU calibration system can calibrate multiple ECUs simultaneously, and the main program can also accomplish its calculation and send commands to the actuators in time. By the multi-ECU calibration system, the calibration effort and time can be reduced and the variables in ECU can get a better match with the variables of other ECUs.
基金Sponsored by the Ministerial Level Advanced Research(10660060220)
文摘A hardware-in-the-loop simulating platform is developed to avoid designing defects caused by the complicated logical structure and multiple-functional buildup of the dectronic control unit（ECU）in modem diesel engines, and to diminish potential damages on components or human exposure to dangers in R＆D en- deavor. This plat-form consists of a computer installed with software Matlab/Simulink/RTW and dSPACE/ ControlDesk; a diesel engine ECU, and a dSPACE autobox which runs a real-time diesel engine model. A typical model of diesel engine with turbocharger and intercooler is presented. Based on this model our research is carried out with a real ECU to test its software control strategies. Results show that by using the diesel engine model downloaded inside, the hardware-in-the-loop platform can simulate diesel engine＇s working conditions and generate all kinds of sensor signals which ECU needs on a real-time basis. So the ECU control strategies can be validated and relevant parameters roughly calibrated.
基金supported by the National Natural Science Foundation of China(51775325)Hong Kong Scholars Program of China(XJ2013015)。
文摘In this paper,we propose an improved torque sensorless speed control method for electric assisted bicycle,this method considers the coordinate conversion.A low-pass filter is designed in disturbance observer to estimate and compensate the variable disturbance during cycling.A DC motor provides assisted power driving,the assistance method is based on the realtime wheel angular velocity and coordinate system transformation.The effect of observer is proved,and the proposed method guarantees stability under disturbances.It is also compared to the existing methods and their performances are illustrated through simulations.The proposed method improves the performance both in rapidity and stability.
文摘By means of circuit simulation, hardware of electronic control unit （ECU） of high pressure common-rail electronic control fuel system for diesel engine is designed. According to the system requirements for hardware of ECU, signal-processing circuit of variable reluctance （VR） sensor, filter circuit for input signal, high voltage power circuit and driver and protection circuit of solenoid are simulated as emphases. Difficulties of wide scope of VR sensor output signal, efficiency of high voltage power and reliable and swift driver of solenoid are solved. The results of simulation show that the hardware meets the requirement of the fuel system. At the same time, circuit simulation can greatly increase quality of the design, alleviate design labor and shorten design time.
文摘为了方便更新汽车电子控制单元(electronic control unit,ECU)的应用代码,针对汽车控制系统自身的特点,设计出汽车ECU在线升级系统。该升级系统利用车身控制器局域网络(controller area network,CAN),遵循诊断协议ISO15765,将ISO15765诊断协议传输层和应用层规范应用于在线升级系统的上位机与ECU之间通信,实现对车身控制系统中各个ECU节点的在线更新应用代码功能。给出了该升级系统在STM8和XC167CI单片机的试验结果。试验证明,该升级系统不仅能够满足实际的代码更新要求,而且具有较强的通用性和可扩展性。
