Slip-Control Strategy of Dual Independent Electric Drive Tracked Vehicle

In order to improve the brake performance of a dual independent electric drive tracked vehicle,a dynamic model for braking situation was established.Then,a sliding model controller(SMC)with an auxiliary system was designed to control the slip and its effectiveness was proved.A hardware-in-loop simulation through MATLAB/XPC was compared with the normal SMC and normal integral sliding mode controller(ISMC),the results show that SMC with the auxiliary system has a better performance:a smaller overshoot and steady state error.The disturbance is suppressed effectively.In the initial speed of 65.km/h,the brake distance was shortened by 3.4%and 6.8%compared with the other two methods,respectively.Finally,initial speeds of 30-36.km/h tests was carried out on a flat soil road.Compared with a no-control brake,the displacement was shortened by 1.8.m.It demonstrates the effectiveness of the slip-control strategy.In the same situation,the error between the simulation and test is 18.1%,which validates the accuracy of models.

Study on Modeling and Control Strategy for Electric Drive Motor of Tracked Vehicles

Aimed at the requirements for electric transmission system of a military tracked vehicle, the motor's design indexes were analysed and calculated. A model based on saturate inductance parameter of interior permanent magnet (IPM) synchronous motor was brought forward by using finite element analysis. And its control strategy based on the largest running capability was studied also. The experiment results for a scale model show that the modelling method improves the model's accuracy, and the motor's control strategy is effective.

Adaptive Robust Servo Control for Vertical Electric Stabilization System of Tank and Experimental Validation

A tracking stability control problem for the vertical electric stabilization system of moving tank based on adaptive robust servo control is addressed.This paper mainly focuses on two types of possibly fast timevarying but bounded uncertainty within the vertical electric stabilization system:model parameter uncertainty and uncertain nonlinearity.First,the vertical electric stabilization system is constructed as an uncertain nonlinear dynamic system that can reflect the practical mechanics transfer process of the system.Second,the dynamical equation in the form of state space is established by designing the angular tracking error.Third,the comprehensive parameter of system uncertainty is designed to estimate the most conservative effects of uncertainty.Finally,an adaptive robust servo control which can effectively handle the combined effects of complex nonlinearity and uncertainty is proposed.The feasibility of the proposed control strategy under the practical physical condition is validated through the tests on the experimental platform.This paper pioneers the introduction of the internal nonlinearity and uncertainty of the vertical electric stabilization system into the settlement of the tracking stability control problem,and validates the advanced servo control strategy through experiment for the first time.

Implementation of Fuzzy Logic Control into an Equivalent Minimization Strategy for Adaptive Energy Management of A Parallel Hybrid Electric Vehicle

As government agencies continue to tighten emissions regulations due to the continued increase in greenhouse gas production, automotive industries are seeking to produce increasingly efficient vehicle technology. Hybrid electric vehicles (HEVs) have been introduced to mitigate problems while improving fuel economy. HEVs have led to the demand of creating more advanced controls software to consider multiple components for propulsive power in a vehicle. A large section in the software development process is the implementation of an optimal energy management strategy meant to improve the overall fuel efficiency of the vehicle. Optimal strategies can be implemented when driving conditions are known a prior. The Equivalent Consumption Minimization Strategy (ECMS) is an optimal control strategy that uses an equivalence factor to equate electrical to mechanical power when performing torque split determination between the internal combustion engine and electric motor for propulsive and regenerative torque. This equivalence factor is determined from offline vehicle simulations using a sensitivity analysis to provide optimal fuel economy results while maintaining predetermined high voltage battery state of charge (SOC) constraints. When the control hierarchy is modified or different driving styles are applied, the analysis must be redone to update the equivalence factor. The goal of this work is to implement a fuzzy logic controller that dynamically updates the equivalence factor to improve fuel economy, maintain a strict charge sustaining window of operation for the high voltage battery, and reduce computational time required during algorithm development. The adaptive algorithm is validated against global optimum fuel economy and charge sustaining results from a sensitivity analysis performed for multiple drive cycles. Results show a maximum fuel economy improvement of 9.82% when using a mild driving style and a 95% success rate when maintaining an ending SOC within 5% of the desired SOC regardless of starting SOC.

An Energy Efficient Control Strategy for Electric Vehicle Driven by In-Wheel-Motors Based on Discrete Adaptive Sliding Mode Control

This paper presents an energy-efficient control strategy for electric vehicles(EVs)driven by in-wheel-motors(IWMs)based on discrete adaptive sliding mode control(DASMC).The nonlinear vehicle model,tire model and IWM model are established at first to represent the operation mechanism of the whole system.Based on the modeling,two virtual control variables are used to represent the longitudinal and yaw control efforts to coordinate the vehicle motion control.Then DASMC method is applied to calculate the required total driving torque and yaw moment,which can improve the tracking performance as well as the system robustness.According to the vehicle nonlinear model,the additional yaw moment can be expressed as a function of longitudinal and lateral tire forces.For further control scheme development,a tire force estimator using an unscented Kalman filter is designed to estimate real-time tire forces.On these bases,energy efficient torque allocation method is developed to distribute the total driving torque and differential torque to each IWM,considering the motor energy consumption,the tire slip energy consumption,and the brake energy~?recovery.Simulation results of the proposed control strategy using the co-platform of Matlab/Simulink and CarSim way.

Modeling and Performance Prediction of Induction Motor Drive System for Electric Drive Tracked Vehicles

The principle of rotor flux-orientation vector control on 100/150 kW three-phase AC induction motor for electric drive tracked vehicles is analyzed, and the mathematic model is deduced. The drive system of induction motor is modeled and simulated by Matlab/Simulink. The characteristics of motor and drive system are analyzed and evaluated by practical bench test. The simulation and bench test results show that the model is valid, and the driving control system has constant torque under rated speed, constant torque above rated speed, widely variable speed range and better dynamic characteristics. In order to evaluate the practical applications of high power induction motor driving system in electric drive tracked vehicles, a collaborative simulation based on interface technology of Matlab/Simulink and multi-body dynamic analysis software known as RecurDyn is done, the vehicle performances are predicted in the acceleration time (0-32 km/h) and turning characteristic (v=10 km/h, R=B).

Predictive Field-Oriented Control for Electric Drives

Model predictive field-oriented control(PFOC)is a novel control strategy belonging to the class of finite control set model predictive control(FCS-MPC)for electric drive systems.It is a direct control scheme which minimizes the cost function through the convergence of errors between the given and predictive stator currents.In this paper,PFOC is thoroughly presented and analyzed through its dynamics and steady state operations under wide range of speed and varying torque conditions.In light of PFOC’s model based characteristics,its robustness an d influence under model parameters’mismatch is also investigated.Experiments are conducted to show these performance and sensitivities.

Enhancing Safety in Autonomous Vehicle Navigation:An Optimized Path Planning Approach Leveraging Model Predictive Control

This paper explores the application of Model Predictive Control(MPC)to enhance safety and efficiency in autonomous vehicle(AV)navigation through optimized path planning.The evolution of AV technology has progressed rapidly,moving from basic driver-assistance systems(Level 1)to fully autonomous capabilities(Level 5).Central to this advancement are two key functionalities:Lane-Change Maneuvers(LCM)and Adaptive Cruise Control(ACC).In this study,a detailed simulation environment is created to replicate the road network between Nantun andWuri on National Freeway No.1 in Taiwan.The MPC controller is deployed to optimize vehicle trajectories,ensuring safe and efficient navigation.Simulated onboard sensors,including vehicle cameras and millimeterwave radar,are used to detect and respond to dynamic changes in the surrounding environment,enabling real-time decision-making for LCM and ACC.The simulation resultshighlight the superiority of the MPC-based approach in maintaining safe distances,executing controlled lane changes,and optimizing fuel efficiency.Specifically,the MPC controller effectively manages collision avoidance,reduces travel time,and contributes to smoother traffic flow compared to traditional path planning methods.These findings underscore the potential of MPC to enhance the reliability and safety of autonomous driving in complex traffic scenarios.Future research will focus on validating these results through real-world testing,addressing computational challenges for real-time implementation,and exploring the adaptability of MPC under various environmental conditions.This study provides a significant step towards achieving safer and more efficient autonomous vehicle navigation,paving the way for broader adoption of MPC in AV systems.

Modeling and Control of Parallel Hybrid Electric Vehicle Using Sea-Lion Optimization

This paper develops a parallel hybrid electric vehicle(PHEV)propor-tional integral controller with driving cycle.To improve fuel efficiency and reduce hazardous emissions in hybrid electric vehicles(HEVs)combine an electric motor(EM),a battery and an internal combustion engine(ICE).The electric motor assists the engine when accelerating,driving longer highways or climbing hills.This enables the use of a smaller,more efficient engine.It also makes use of the concept of regenerative braking to maximize energy efficiency.In a Hybrid Electric Vehicle(HEV),energy dissipated while braking is utilized to charge the battery.The proportional integral controller was used in this paper to analyze engine,motor performance and the New European Driving Cycle(NEDC)was used in the vehicle driving test using Matlab/Simulink.The proportional integral controllers were designed to track the desired vehicle speed and manage the vehi-cle’s energyflow.The Sea Lion Optimization(SLnO)methods were created to reduce fuel consumption in a parallel hybrid electric vehicle and the results were obtained for the New European Driving Cycle.

Connect & Drive:design and evaluation of cooperative adaptive cruise control for congestion reduction

Road throughput can be increased by driving at small inter-vehicle time gaps. The amplification of velocity disturbances in upstream direction, however, poses limitations to the minimum feasible time gap. This effect is covered by the notion of string stability. String-stable behavior is thus considered an essential requirement for the design of automatic distance control systems, which are needed to allow for safe driving at time gaps well below 1 s. Using wireless inter-vehicle communications to provide real-time information of the preceding vehicle, in addition to the information obtained by common Adaptive Cruise Control （ACC） sensors, appears to significantly decrease the feasible time gap, which is shown by practical experiments with a test fleet consisting of six passenger vehicles. The large-scale deployment of this system, known as Cooperative ACC （CACC）, however, poses challenges with respect to the reliability of the wireless communication system. A solution for this scalability problem can be found in decreasing the transmission power and/or beaconing rate, or adapting the communications protocol. Although the main CACC objective is to increase road throughput, the first commercial application of CACC is foreseen to be in truck platooning, since short distance following is expected to yield significant fuel savings in this case.

Four Wheel Independent Drive Electric Vehicle Lateral Stability Control Strategy

In this paper,a kind of lateral stability control strategy is put forward about the four wheel independent drive electric vehicle.The design of control system adopts hierarchical structure.Unlike the previous control strategy,this paper introduces a method which is the combination of sliding mode control and optimal allocation algorithm.According to the driver’s operation commands(steering angle and speed),the steady state responses of the sideslip angle and yaw rate are obtained.Based on this,the reference model is built.Upper controller adopts the sliding mode control principle to obtain the desired yawing moment demand.Lower controller is designed to satisfy the desired yawing moment demand by optimal allocation of the tire longitudinal forces.Firstly,the optimization goal is built to minimize the actuator cost.Secondly,the weighted least-square method is used to design the tire longitudinal forces optimization distribution strategy under the constraint conditions of actuator and the friction oval.Beyond that,when the optimal allocation algorithm is not applied,a method of axial load ratio distribution is adopted.Finally,Car Sim associated with Simulink simulation experiments are designed under the conditions of different velocities and different pavements.The simulation results show that the control strategy designed in this paper has a good following effect comparing with the reference model and the sideslip angle is controlled within a small rang at the same time.Beyond that,based on the optimal distribution mode,the electromagnetic torque phase of each wheel can follow the trend of the vertical force of the tire,which shows the effectiveness of the optimal distribution algorithm.

Direct Yaw Moment Control for Distributed Drive Electric Vehicle Handling Performance Improvement

For a distributed drive electric vehicle（DDEV） driven by four in-wheel motors, advanced vehicle dynamic control methods can be realized easily because motors can be controlled independently, quickly and precisely. And direct yaw-moment control（DYC） has been widely studied and applied to vehicle stability control. Good vehicle handling performance： quick yaw rate transient response, small overshoot, high steady yaw rate gain, etc, is required by drivers under normal conditions, which is less concerned, however. Based on the hierarchical control methodology, a novel control system using direct yaw moment control for improving handling performance of a distributed drive electric vehicle especially under normal driving conditions has been proposed. The upper-loop control system consists of two parts： a state feedback controller, which aims to realize the ideal transient response of yaw rate, with a vehicle sideslip angle observer; and a steering wheel angle feedforward controller designed to achieve a desired yaw rate steady gain. Under the restriction of the effect of poles and zeros in the closed-loop transfer function on the system response and the capacity of in-wheel motors, the integrated time and absolute error（ITAE） function is utilized as the cost function in the optimal control to calculate the ideal eigen frequency and damper coefficient of the system and obtain optimal feedback matrix and feedforward matrix. Simulations and experiments with a DDEV under multiple maneuvers are carried out and show the effectiveness of the proposed method： yaw rate rising time is reduced, steady yaw rate gain is increased, vehicle steering characteristic is close to neutral steer and drivers burdens are also reduced. The control system improves vehicle handling performance under normal conditions in both transient and steady response. State feedback control instead of model following control is introduced in the control system so that the sense of control intervention to drivers is relieved.

Novel flexible hybrid electric system and adaptive online-optimal energy management controller for plug-in hybrid electric vehicles

In order to achieve the improvement of the driving comfort and energy efficiency,an new e-CVT flexible full hybrid electric system(E2FHS) is proposed,which uses an integrated main drive motor and generator to take the place of the original automatic or manual transmission to realize the functions of continuously variable transmission(e-CVT).The design and prototype realization of the E2FHS system for a plug-in hybrid vehicle(PHEV) is performed.In order to analyze and optimize the parameters and the power flux between different parts of the E2FHS,simulation software is developed.Especially,in order to optimize the performance of the energy economy improvement of the E2FHS,the effect of the different energy management controllers is investigated,and an adaptive online-optimal energy management controller for the E2FHS is built and validated by the prototype PHEV.

Neural-Fuzzy-Based Adaptive Sliding Mode Automatic Steering Control of Vision-based Unmanned Electric Vehicles

This paper presents a novel neural-fuzzy-based adaptive sliding mode automatic steering control strategy to improve the driving performance of vision-based unmanned electric vehicles with time-varying and uncertain parameters.Primarily,the kinematic and dynamic models which accurately express the steering behaviors of vehicles are constructed,and in which the relationship between the look-ahead time and vehicle velocity is revealed.Then,in order to overcome the external disturbances,parametric uncertainties and time-varying features of vehicles,a neural-fuzzy-based adaptive sliding mode automatic steering controller is proposed to supervise the lateral dynamic behavior of unmanned electric vehicles,which includes an equivalent control law and an adaptive variable structure control law.In this novel automatic steering control system of vehicles,a neural network system is utilized for approximating the switching control gain of variable structure control law,and a fuzzy inference system is presented to adjust the thickness of boundary layer in real-time.The stability of closed-loop neural-fuzzy-based adaptive sliding mode automatic steering control system is proven using the Lyapunov theory.Finally,the results illustrate that the presented control scheme has the excellent properties in term of error convergence and robustness.

Synthesis of Fractional-order PI Controllers and Fractional-order Filters for Industrial Electrical Drives

This paper introduces an electrical drives control architecture combining a fractional-order controller and a setpoint pre-filter. The former is based on a fractional-order proportional-integral(PI) unit, with a non-integer order integral action, while the latter can be of integer or non-integer type. To satisfy robustness and dynamic performance specifications, the feedback controller is designed by a loop-shaping technique in the frequency domain. In particular, optimality of the feedback system is pursued to achieve input-output tracking. The setpoint pre-filter is designed by a dynamic inversion technique minimizing the difference between the ideal synthesized command signal(i.e., a smooth monotonic response) and the prefilter step response. Experimental tests validate the methodology and compare the performance of the proposed architecture with well-established control schemes that employ the classical PIbased symmetrical optimum method with a smoothing pre-filter.

Model Predictive Control for Electrical Drive Systems-An Overview

This paper reviews the classification and application of the model predictive control(MPC)in electrical drive systems.Main attention is drawn to the discrete form of MPC,i.e.finite control set model predictive control(FCS-MPC),which outputs directly the switching states of power converters.To show the diversity and simple realization with various control performances of the strategy,in this paper,several different FCS-MPCs with their working mechanisms are introduced.Comparison of FCS-MPC with conventional control strategies for electric drives is presented.Furthermore,extensive control issues,e.g.encoderless control and disturbance observation are also included in this work.Finally,the trend of research hot topics on MPC is discussed.

Variable Parameter Self-Adaptive Control Strategy Based on Driving Condition Identification for Plug-In Hybrid Electric Bus

A variable parameter self-adaptive control strategy based on driving condition identification is proposed to take full advantage of the fuel saving potential of the plug-in hybrid electric bus(PHEB).Firstly,the principal component analysis(PCA)and the fuzzy c-means clustering(FCM)algorithm is used to construct the comprehensive driving cycle,congestion driving cycle,urban driving cycle and suburban driving cycle of Chinese urban buses.Secondly,an improved particle swarm optimization(IPSO)algorithm is proposed,and is used to optimize the control parameters of PHEB under different driving cycles,respectively.Then,the variable parameter self-adaptive control strategy based on driving condition identification is given.Finally,for an actual running vehicle,the driving condition is identified by relevance vector machine(RVM),and the corresponding control parameters are selected to control the vehicle.The simulation results show that the fuel consumption of using the variable parameter self-adaptive control strategy is reduced by 4.2% compared with that of the fixed parameter control strategy,and the feasibility of the variable parameter self-adaptive control strategy is verified.

Analysis of Control Characteristic for the Drive System of Electric Transit Bus

The drive control system of the permanent magnetic direct current motor with the enhanced magnetism windings used in the electric transit bus is developed. The mathematics model of the drive control system for this motor is established. The new mode that the added exiting magnetism field could be weakened and the speed of the motor could be controlled automatically is proposed and realized. The method of root locus design is applied to analyze the acceleration control characteristic. The results of simulation show that the new drive motor control system has extraordinary response characteristic and adjustable performance. Experiments of vehicle running show that the drive control system's antijamming ability is strong and the adjustable performance is fast and smooth, it can meet the demand of power characteristic very well.

Simulation of Adaptive Control Strategy for Electrical Discharge Machining Process

Electrode down-time is an important factor affecting the efficiency and stability of electrical discharge machining(EDM) process. In the research, a way of simulating the regulation of the electrode down-time in an EDM adaptive control system has been studied. All the simulations are performed on Matlab. The simulation results demonstrate that this adaptive controller by regulating electrode down-time can direct the gap state to follow the specified reference gap state with or without disturbances. Finally, the adaptive control scheme is also validated by experiments. The significance of the simulation of an EDM adaptive control system lies on the fact that it provides a convenient way to guide the actual production and provides a new study method for the research of EDM control strategy with no regard of experimental conditions.