To efficiently utilize the kaolin, an economical way of preparing cordierite ceramic with high performance for electric heater supports was put forward. In this study, sintering process, phase transformation, microstr...To efficiently utilize the kaolin, an economical way of preparing cordierite ceramic with high performance for electric heater supports was put forward. In this study, sintering process, phase transformation, microstructure evolutions were systematically studied by heating microscope, X-ray diffraction, scanning electronic microscope and thermal analysis. Properties（physical properties, electrical properties and coefficient of thermal expansion（CTE）） were tested for comprehensive performance evaluation. The results showed that the utilization of poor quality kaolin broadened the firing range of cordierite ceramic which was from 1 200 to 1 380 ℃. Microstructure becomes loose with increasing of the pore size, which had significant influence on bending strength and electrical properties. High content of K2 O in poor quality kaolin was the reason for liquid phase generation in sintering process, which further leads to microstructural changes. The cordierite ceramic sintered at 1 320 ℃ had the properties as follows： CTE of 1.98×10^（-6） ℃^（-1）（500 ℃）, bending strength of 90 MPa, apparent porosity of 15.1%, dielectric constant of 7.5（100 Hz）, and volume resistivity of 1.05×109 Ω·cm（100 Hz）. The comprehensive properties are very suitable for use as electric heater supports.展开更多
In this research, the performance of the solar thermal powered systems (STPS) is analyzed with different models (without inserts, with inserts and with Nano fluids with different concentrations) and its impact on the ...In this research, the performance of the solar thermal powered systems (STPS) is analyzed with different models (without inserts, with inserts and with Nano fluids with different concentrations) and its impact on the Electric load in a residential/Institutional Electrical Distribution system. For this purpose, the electrical and solar thermal water heater is tested and validated. Solar thermal powered systems and its impact on the Institutional electrical distribution feeders are tested and compared with the energy efficiency (EE) and cost optimization. The goal of this paper is to analyze the impact of solar thermal energy on electrical energy consumption in the electrical distribution feeder level. The electrical system cost and energy consumptions are tabulated and observed that there is a considerable savings.展开更多
基金Funded by the Major State Basic Research Development Program of China(973 Program)(No.2010CB227105)
文摘To efficiently utilize the kaolin, an economical way of preparing cordierite ceramic with high performance for electric heater supports was put forward. In this study, sintering process, phase transformation, microstructure evolutions were systematically studied by heating microscope, X-ray diffraction, scanning electronic microscope and thermal analysis. Properties（physical properties, electrical properties and coefficient of thermal expansion（CTE）） were tested for comprehensive performance evaluation. The results showed that the utilization of poor quality kaolin broadened the firing range of cordierite ceramic which was from 1 200 to 1 380 ℃. Microstructure becomes loose with increasing of the pore size, which had significant influence on bending strength and electrical properties. High content of K2 O in poor quality kaolin was the reason for liquid phase generation in sintering process, which further leads to microstructural changes. The cordierite ceramic sintered at 1 320 ℃ had the properties as follows： CTE of 1.98×10^（-6） ℃^（-1）（500 ℃）, bending strength of 90 MPa, apparent porosity of 15.1%, dielectric constant of 7.5（100 Hz）, and volume resistivity of 1.05×109 Ω·cm（100 Hz）. The comprehensive properties are very suitable for use as electric heater supports.
文摘In this research, the performance of the solar thermal powered systems (STPS) is analyzed with different models (without inserts, with inserts and with Nano fluids with different concentrations) and its impact on the Electric load in a residential/Institutional Electrical Distribution system. For this purpose, the electrical and solar thermal water heater is tested and validated. Solar thermal powered systems and its impact on the Institutional electrical distribution feeders are tested and compared with the energy efficiency (EE) and cost optimization. The goal of this paper is to analyze the impact of solar thermal energy on electrical energy consumption in the electrical distribution feeder level. The electrical system cost and energy consumptions are tabulated and observed that there is a considerable savings.
