China's Processing Trade Development for Mechanical and Electrical Products

Since the launch of the economic reform and opening to the outside world, China has seen rapid growth in its export of mechanical and electrical products, with its export

Formation mechanism of basin-like depression defect in electric upsetting process of Ni80A superalloy

A kind of surface instability,basin-like depression defect companied by mixed grain structure at the bottom of large-scale valve during electric upsetting process,would significantly influence the microstructures and mechanical properties of components.In order to analyze the forming process of the basin-like depression defect,a finite element model for the electric upsetting process of Ni80A superalloy was developed using multi-field and multi-scale coupling analysis method.Subsequently,a series of parameters loading path schemes for force and current were designed by varying the initial value,peak value and value level,and their effects on basin-like depression and mixed grain structure were simulated and uncovered.It is concluded that the changes of heating speed and pressurization speed result in the different flow velocities between the inner and outer layers of billet,thus exerting the basin-like depression.Simulation results also indicate that these defects can be optimized through the parameter coordination between force and current.Finally,the validity and reliability of the finite element model were verified by physical experiments in electric upsetting process.

A novel hydrothermal method for zinc extraction and separation from zinc ferrite and electric arc furnace dust

A novel hydrothermal process was developed to extract zinc from pure zinc ferrite（ZnFe2O4） nanopowder and zinc-containing electric arc furnace（EAF） dust using hexahydrated ferric chloride（FeCl3-6H2O） as a decomposing agent.The effects of solid FeCl3-6H2O to ZnFe2O4 ratio by mass（RF/Z）,hydrothermal reaction temperature,and time on zinc extraction were systematically investigated.In the results,when the hydrothermal reaction is conducted at 150℃ for 2 h with RF/Z of 15：20,the efficiency of zinc extraction from ZnFe2O4 reaches97.2%,and the concentration of ferric ions（Fe^3＋） in the leaching solution is nearly zero,indicating a high selectivity for zinc.In addition,the zinc extraction efficiency from the EAF dust reaches 94.5%in the case of the hydrothermal reaction performed at 200℃ for 10 h with the solid FeCl3-6H2O to EAF dust ratio by mass（RF/EAF dust） of 15：10.Zinc and iron separation is achieved by adjusting the pH value of the leaching solution according to the different precipitation pH values of metal hydroxides.

MICRO ELECTRICAL DISCHARGE MACHINING DEPOSITION IN AIR

A new deposition method is described using micro electrical discharge machining （EDM） to deposit tool electrode material on workpiece in air. The basic principles of micro electrical discharge deposition （EDD） are analyzed and the realized conditions are predicted. With an ordinary EDM shaping machine, brass as the electrode, high-speed steel as the workpiece, a lot of experiments are carried out on micro EDD systematically and thoroughly. The effects of major processing parameters, such as the discharge current, discharge duration, pulse interval and working medium, are obtained, As a result, a micro cylinder with 0.19 mm in diameter and 7.35 mm in height is deposited. By exchanging the polarities of the electrode and workpiece the micro cylinder can be removed selectively. So the reversible machining of deposition and removal is achieved, which breaks through the constraint of traditional EDM. Measurements show that the deposited material is compact and close to workpiece base, whose components depend on the tool electrode, material.

CONTROL OBSERVATION OF THERAPEUTIC EFFECTS ON SYNDROME OF THE 3^(rd) LUMBAR TRANSVERSE PROCESS WITH THICK SILVER WARMING NEEDLING AND ELECTRIC ACUPUNCTURE

Objective: To compare the clinical therapeutic effects on the syndrome of L3 transverse process between thick silver warming needling and electric acupuncture. Methods: One hundred and twenty cases of the syndrome of L3 transverse process were randomized into observation group and the control, 60 cases for each one. Thick silver warming needling was applied in observation group and electric acupuncture in the control. Results: The curative rate was 81.7% in observation group and 58.3% in the control, indicating significant difference （P<0.01）. The significant difference in the therapeutic effects between two groups had not been discovered yet for the cases within 3 months of sickness （P>0.05）, but, the therapeutic effect in observation group was superior to that in the control for the cases over 3 months of sickness （P<0.01）. Conclusion: The therapeutic effects of thick silver warming needling and electric acupuncture were quite advantageous on the syndrome of L3 transverse process, but that of thick silver warming needling was superior to electric acupuncture.

Fast strength-ductility synergistically adjusting of cold spray additive manufactured Cu deposits via electric pulse processing

Electric Pulse Processing(EPP)treatment was innovatively introduced to optimize the strength and ductility of the CSAMed Cu deposits.The results show that EPP is an efficient and fast post-treatment to improve the strength and ductility(within tens of seconds).The larger the pulse current and number of pulses,the better the mechanical properties.Interestingly,this research found that when the heat input determined by pulse current and number of pulses exceeds a certain threshold(pulse current intensity is 2000 A,number of pulses is 10),increasing the number of repeat time could also effectively improve the mechanical properties.A tensile strength of 210 MPa and a ductility of 14.0%could be obtained with reasonable EPP parameters(pulse current intensity is 2000 A,number of pulses is 10,and repeat number is 2),which is similar to those of conventional annealing(e.g.,tensile strength is 272 MPa,elongation is 28.3%).The microstructure evolution analysis shows that EPP can effectively improve the bonding quality between the deposited particles by recrystallization,promote grain growth and the formation of twins,which is the main reason for the improvement of mechanical properties.

Bremsstrahlung Radiation of Fast Electrons in Long Air Gaps

The results of an experiment on discharges in long atmospheric pressure air gaps at a pulsed voltage of amplitude up to 800 kV and risetime 150-200 ns are analyzed. In the experiment, a radiation pulse of photon energy 〉 5 keV and duration 10-20 ns has been detected. It has been shown that the x-ray pulse is due to the ＂runaway＂ of electrons from the head of an anode-directed streamer. The estimated maximum bremsstrahlung energy is about 5-10 keV. The presence of a maximum in the bremsstrahlung spectrum is due to that the photons emitted by electrons are absorbed by atoms of the gas in which the discharge operates.

Ce-substituted Lithium Ferrite:Preparation and Electrical Relaxation Studies

Ce-substituted lithium ferrite, Li0.5CexFe2.5-x04 （x = 0, 0.05 and 0.1 ） compositions were synthesized from metal nitrates and citric acid by the solution combustion process by keeping the oxidizer to fuel ratio at unity. The thermal decomposition process was investigated by thermogravimetry-differential thermal analysis, which showed a stable phase formation above 600 ℃. The phase composition and molecular bonding of Li0.5CexFe2.5_x04 were characterized by X-ray powder diffraction analysis and Fourier transform infrared spectroscopy, respectively. An extensive study of electrical relaxation process has been represented with impedance and modulus as a function of frequency at different temperatures. The activation energy obtained from both the formalisms was found to be equal within the error. The dc conductivity and hopping frequency were thermally activated and their activation energies were found to be in the range of 0.69-0.64 eV for x = 0.05. The scaling of modulus and impedance were used to understand the electrical relaxation behaviour of the compositions and they suggest the time temperature superposition principle.

Solar Wind：A Possible Factor Driving the Interannual Sea Surface Temperature Tripolar Mode over North Atlantic

The effect of solar wind（SW） on the North Atlantic sea surface temperature（SST） in boreal winter is examined through an analysis of observational data during 1964-2013.The North Atlantic SSTs show a pronounced meridional tripolar pattern in response to solar wind speed（SWS） variations.This pattern is broadly similar to the leading empirical orthogonal function（EOF） mode of interannual variations in the wintertime SSTs over North Atlantic.The time series of this leading EOF mode of SST shows a significant interannual period,which is the same as that of wintertime SWS.This response also appears as a compact north-south seesaw of sea level pressure and a vertical tripolar structure of zonal wind,which simultaneously resembles the North Atlantic Oscillation（NAO） in the overlying atmosphere.As compared with the typical low SWS winters,during the typical high SWS winters,the stratospheric polar night jet（PNJ） is evidently enhanced and extends from the stratosphere to the troposphere,even down to the North Atlantic Ocean surface.Notably,the North Atlantic Ocean is an exclusive region in which the SW signal spreads downward from the stratosphere to the troposphere.Thus,it seems that the SW is a possible factor for this North Atlantic SST tripolar mode.The dynamical process of stratosphere-troposphere coupling,together with the global atmospheric electric circuit-cloud microphysical process,probably accounts for the particular downward propagation of the SW signal.