Under the background of the new era,higher requirements are put forward for colleges and universities to carry out teaching reform.Teachers of electrical automation control courses should update their teaching ideas r...Under the background of the new era,higher requirements are put forward for colleges and universities to carry out teaching reform.Teachers of electrical automation control courses should update their teaching ideas regularly,innovate teaching methods,and take novel and effective measures to carry out related work.Because electrical automation control courses tend to be technology-oriented,teachers can help students consolidate basic knowledge.They should also focus on developing practical skills so students can easily adapt to future job positions.However,there are many problems in the actual teaching process,which hampers the improvement of the teaching quality to a certain extent.In view of this,this paper presents an in-depth exploration based on theories and practical experiences.It starts with an analysis of the current teaching status of electrical automation control courses in colleges and universities,followed by suggestions to improve them based on their characteristics and students’needs.展开更多
As science and technology continue to progress forward,electrical automation engineering is also developing,of which programmable logic controller(PLC)technology is widely being used.Through the integration of PLC tec...As science and technology continue to progress forward,electrical automation engineering is also developing,of which programmable logic controller(PLC)technology is widely being used.Through the integration of PLC technology and traditional electrical automation technology,good development of modern science and technology is promoted while traditional automation is preserved.The development of electrical engineering can greatly improve the strength of science,technology,and economy in our country.Based on PLC technology,this paper analyzes the design of electrical automation control.展开更多
Aiming at the comparatively laggard level of power plant electrical system automation, this paper analyzes the feasibility,necessity and some key points of the application of integrated automation technology to power ...Aiming at the comparatively laggard level of power plant electrical system automation, this paper analyzes the feasibility,necessity and some key points of the application of integrated automation technology to power plant electrical system. New idea using fieldbus control system technology is presented. This paper also gives the outline and detailed schemes.展开更多
This paper introduces in detail the reactive power compensation technology and its characteristics, to reduce the loss of reactive power compensation technology 1N power distribution system and the electrical automati...This paper introduces in detail the reactive power compensation technology and its characteristics, to reduce the loss of reactive power compensation technology 1N power distribution system and the electrical automation, improve the utilization rate, and realize the control of the voltage amplitude in the system network, voltage stability of power distribution system, has carried on the system analysis to reduce failure of the harmonic current to the power supply system and other functions. And the paper in-depth study on the application of reactive power compensation technology in electrical automation from the reactive compensation technology, substation and distribution line reactive power compensation, power users of reactive power compensation and other aspects.展开更多
With the continuous development and progress of science and technology in China, automation technology has occupied an important position in many fields while its application in power system is increasingly widespread...With the continuous development and progress of science and technology in China, automation technology has occupied an important position in many fields while its application in power system is increasingly widespread. Therefore, the application of electrical automation technology in power system is of great significance for power supply stability and work efficiency. In this paper, the author analyzes the application of electric automation technology in power system and makes contributions to the sustainable and stable development of power enterprises.展开更多
To apply automation in electrical engineering is to use a series of devices with functions of automatic detection and control to realize the realtime or remote control,management,and monitoring of the original electri...To apply automation in electrical engineering is to use a series of devices with functions of automatic detection and control to realize the realtime or remote control,management,and monitoring of the original electrical system.Therefore,the electrical automation technology has broad development space in the construction of electrical engineering,and it is worth of application and study for relevant electrical installation engineering and scientific research departments.In the actual production process,it is necessary to optimize the production mode,reduce the cost,and keep the good working performance of electrical equipment.Based on this,this article briefly analyzes the application of electrical automation in electrical engineering,hoping to provide an effective reference.展开更多
With the continuous improvement of industrial automation in our country and the use of high technology, promoted the scientific content of traditional industry. The development of electric automation control system in...With the continuous improvement of industrial automation in our country and the use of high technology, promoted the scientific content of traditional industry. The development of electric automation control system inevitably turn towards a systematic, comprehensive development direction. This article first analyze the present problems in electrical automation monitoring system, analyzes its future development trends, so as to provide some reference for the effective application of electrical automation in the future monitoring system, fundamentally realize the resources sharing.展开更多
Lack of up-to-date information on efficient operation and maintenance of EPDS （electric power distribution systems）, Nigeria is addressed by designing and implementing an indigenous real-time monitoring and diagnosi...Lack of up-to-date information on efficient operation and maintenance of EPDS （electric power distribution systems）, Nigeria is addressed by designing and implementing an indigenous real-time monitoring and diagnosis system. The system encompasses the development of software driven hardware positioned at the remotely located sub-stations at the low voltage level to keep track of the network in real-time. The detection of faults exploits threshold passing algorithm through continuous monitoring of the network power quality. Communication between the RTU （remote terminal unit） and the DCC （distribution control center） which is based on GSM is initiated by disturbance. The DCC performs fault evaluation processing using the received data and predetermined faults signatures to determine the nature of disturbance and presents the result in graphic user interface environment. A fault reporting time of 2 s was achieved. The developed system exhibits a high degree of accuracy and manifests no spurious reports during testing. The resultant system limits the effects of interruption and increases power availability by reducing the down time. The system strengthens engineering and management capabilities required to enhance reliability by providing information about the network health status.展开更多
Automation in measurement has wide range of electrical metrology applications and construction of powerful calibration software is one of the highly accurate metrological laboratories’ priorities. Thus, two automatic...Automation in measurement has wide range of electrical metrology applications and construction of powerful calibration software is one of the highly accurate metrological laboratories’ priorities. Thus, two automatic systems for controlling and calibrating the electrical reference standards have been established at National Institute for Standards (NIS), Egypt. The first system has been built to calibrate the zener diode reference standards while the second one has been built to calibrate the electrical sourcing and measuring instruments. These two systems act as the comprehensive and reliable structure that, from the national electrical standards, disseminates the traceability to all the electrical units under calibration. The software of the two systems has been built using the Laboratory Virtual Instrument Engineering Workbench (LabVIEW) graphical language. The standard development procedures have been followed in the building of both systems software. The software requirement specifications as well as functional specifications are taken into consideration. Design, implementation and testing of the software have been performed. Furthermore, software validation for measurements’ uncertainty as well as results’ compatibility in both automatic and manual modes has been achieved.展开更多
This article describes practical preparation of marine engineers on the full mission simulator complex of the ship＇s automated electrical power plant. A full mission simulator complex of the ship＇s automated power m...This article describes practical preparation of marine engineers on the full mission simulator complex of the ship＇s automated electrical power plant. A full mission simulator complex of the ship＇s automated power management system meets International Convention STCW （Standards of Training, Certification and Watchkeeping） 78 （with Manila amendments 2010） requirements in part of adequate reproduction of its operational modes corresponding to the actual configuration and layout of the ship＇s automated power management system with real consumers and typical loads. The simulator is fully consistent with the goals and objectives of the practical training, as well as the goals and objectives of proficiency testing engine department officers on issues of technical maintenance of real ship＇s equipment （high voltage installations included） and means of automation. The simulator＇s complex is designed for training and proficiency testing of cadets and students of maritime educational institutions, as well as training and proficiency testing of marine specialists （mechanics and electricians） by watch-keeping and maintenance of modem integrated automated control systems of ship＇s electric power plant and the individual ship electromechanical systems, including high-voltage systems. A simulator＇s complex provides adequate reproduction of operational situations on technical side of real ship electric and automation equipment provides training on monitoring, control and management diesel-generator sets in hand, semi-automatic and automatic modes of power station, control and management of electromechanical systems, as well as the set of tasks upon parameterization, visualization and etc. Besides number of combinations of monitoring, control and management tasks, the simulator＇s complex provides an opportunity to simulate various practical fault conditions. It allows students to focus on the work of automatic control system in emergency situations and to work out correct actions for a watch-keeper on searching, localizing of faults and troubleshooting of equipment.展开更多
文摘Under the background of the new era,higher requirements are put forward for colleges and universities to carry out teaching reform.Teachers of electrical automation control courses should update their teaching ideas regularly,innovate teaching methods,and take novel and effective measures to carry out related work.Because electrical automation control courses tend to be technology-oriented,teachers can help students consolidate basic knowledge.They should also focus on developing practical skills so students can easily adapt to future job positions.However,there are many problems in the actual teaching process,which hampers the improvement of the teaching quality to a certain extent.In view of this,this paper presents an in-depth exploration based on theories and practical experiences.It starts with an analysis of the current teaching status of electrical automation control courses in colleges and universities,followed by suggestions to improve them based on their characteristics and students’needs.
基金2021 Guangxi Electrical Polytechnic Institute Scientific Research Capability Enhancement Project:Research and development based on Siemens 1200 Visual Material Sorting device(Project No.2021KY03)。
文摘As science and technology continue to progress forward,electrical automation engineering is also developing,of which programmable logic controller(PLC)technology is widely being used.Through the integration of PLC technology and traditional electrical automation technology,good development of modern science and technology is promoted while traditional automation is preserved.The development of electrical engineering can greatly improve the strength of science,technology,and economy in our country.Based on PLC technology,this paper analyzes the design of electrical automation control.
文摘Aiming at the comparatively laggard level of power plant electrical system automation, this paper analyzes the feasibility,necessity and some key points of the application of integrated automation technology to power plant electrical system. New idea using fieldbus control system technology is presented. This paper also gives the outline and detailed schemes.
文摘This paper introduces in detail the reactive power compensation technology and its characteristics, to reduce the loss of reactive power compensation technology 1N power distribution system and the electrical automation, improve the utilization rate, and realize the control of the voltage amplitude in the system network, voltage stability of power distribution system, has carried on the system analysis to reduce failure of the harmonic current to the power supply system and other functions. And the paper in-depth study on the application of reactive power compensation technology in electrical automation from the reactive compensation technology, substation and distribution line reactive power compensation, power users of reactive power compensation and other aspects.
文摘With the continuous development and progress of science and technology in China, automation technology has occupied an important position in many fields while its application in power system is increasingly widespread. Therefore, the application of electrical automation technology in power system is of great significance for power supply stability and work efficiency. In this paper, the author analyzes the application of electric automation technology in power system and makes contributions to the sustainable and stable development of power enterprises.
文摘To apply automation in electrical engineering is to use a series of devices with functions of automatic detection and control to realize the realtime or remote control,management,and monitoring of the original electrical system.Therefore,the electrical automation technology has broad development space in the construction of electrical engineering,and it is worth of application and study for relevant electrical installation engineering and scientific research departments.In the actual production process,it is necessary to optimize the production mode,reduce the cost,and keep the good working performance of electrical equipment.Based on this,this article briefly analyzes the application of electrical automation in electrical engineering,hoping to provide an effective reference.
文摘With the continuous improvement of industrial automation in our country and the use of high technology, promoted the scientific content of traditional industry. The development of electric automation control system inevitably turn towards a systematic, comprehensive development direction. This article first analyze the present problems in electrical automation monitoring system, analyzes its future development trends, so as to provide some reference for the effective application of electrical automation in the future monitoring system, fundamentally realize the resources sharing.
文摘Lack of up-to-date information on efficient operation and maintenance of EPDS （electric power distribution systems）, Nigeria is addressed by designing and implementing an indigenous real-time monitoring and diagnosis system. The system encompasses the development of software driven hardware positioned at the remotely located sub-stations at the low voltage level to keep track of the network in real-time. The detection of faults exploits threshold passing algorithm through continuous monitoring of the network power quality. Communication between the RTU （remote terminal unit） and the DCC （distribution control center） which is based on GSM is initiated by disturbance. The DCC performs fault evaluation processing using the received data and predetermined faults signatures to determine the nature of disturbance and presents the result in graphic user interface environment. A fault reporting time of 2 s was achieved. The developed system exhibits a high degree of accuracy and manifests no spurious reports during testing. The resultant system limits the effects of interruption and increases power availability by reducing the down time. The system strengthens engineering and management capabilities required to enhance reliability by providing information about the network health status.
文摘Automation in measurement has wide range of electrical metrology applications and construction of powerful calibration software is one of the highly accurate metrological laboratories’ priorities. Thus, two automatic systems for controlling and calibrating the electrical reference standards have been established at National Institute for Standards (NIS), Egypt. The first system has been built to calibrate the zener diode reference standards while the second one has been built to calibrate the electrical sourcing and measuring instruments. These two systems act as the comprehensive and reliable structure that, from the national electrical standards, disseminates the traceability to all the electrical units under calibration. The software of the two systems has been built using the Laboratory Virtual Instrument Engineering Workbench (LabVIEW) graphical language. The standard development procedures have been followed in the building of both systems software. The software requirement specifications as well as functional specifications are taken into consideration. Design, implementation and testing of the software have been performed. Furthermore, software validation for measurements’ uncertainty as well as results’ compatibility in both automatic and manual modes has been achieved.
文摘This article describes practical preparation of marine engineers on the full mission simulator complex of the ship＇s automated electrical power plant. A full mission simulator complex of the ship＇s automated power management system meets International Convention STCW （Standards of Training, Certification and Watchkeeping） 78 （with Manila amendments 2010） requirements in part of adequate reproduction of its operational modes corresponding to the actual configuration and layout of the ship＇s automated power management system with real consumers and typical loads. The simulator is fully consistent with the goals and objectives of the practical training, as well as the goals and objectives of proficiency testing engine department officers on issues of technical maintenance of real ship＇s equipment （high voltage installations included） and means of automation. The simulator＇s complex is designed for training and proficiency testing of cadets and students of maritime educational institutions, as well as training and proficiency testing of marine specialists （mechanics and electricians） by watch-keeping and maintenance of modem integrated automated control systems of ship＇s electric power plant and the individual ship electromechanical systems, including high-voltage systems. A simulator＇s complex provides adequate reproduction of operational situations on technical side of real ship electric and automation equipment provides training on monitoring, control and management diesel-generator sets in hand, semi-automatic and automatic modes of power station, control and management of electromechanical systems, as well as the set of tasks upon parameterization, visualization and etc. Besides number of combinations of monitoring, control and management tasks, the simulator＇s complex provides an opportunity to simulate various practical fault conditions. It allows students to focus on the work of automatic control system in emergency situations and to work out correct actions for a watch-keeper on searching, localizing of faults and troubleshooting of equipment.
