ANALYSIS OF ELECTRIC BOUNDARY CONDITION EFFECTS ON CRACK PROPAGATION IN PIEZOELECTRIC CERAMICS

There are three types of cracks: impermeable crack, permeable crack and conducting crack, with different electric boundary conditions on faces of cracks in piezoelectric ceramics, which poses difficulties in the analysis of piezoelectric fracture problems. In this paper, in contrast to our previous FEM formulation, the numerical analysis is based on the use of exact electric boundary conditions at the crack faces, thus the common assumption of electric impermeability in the FEM analysis is avoided. The crack behavior and elasto-electric fields near a crack tip in a PZT-5 piezoelectric ceramic under mechanical, electrical and coupled mechanical- electrical loads with different electric boundary conditions on crack faces are investigated. It is found that the dielectric medium between the crack faces will reduce the singularity of stress and electric displacement. Furthermore, when the permittivity of the dielectric medium in the crack gap is of the same order as that of the piezoelectric ceramic, the crack becomes a conducting crack, the applied electric field has no effect on the crack propagation.

Effect of electric boundary conditions on crack propagation in ferroelectric ceramics

In this paper, the effect of electric boundary conditions on Mode I crack propagation in ferroelectric ceramics is studied by using both linear and nonlinear piezoelectric fracture mechanics. In linear analysis, impermeable cracks under open circuit and short circuit are analyzed using the Stroh formalism and a rescaling method. It is shown that the energy release rate in short circuit is larger than that in open circuit. In nonlinear analysis, permeable crack conditions are used and the nonlinear effect of domain switching near a crack tip is considered using an energy-based switching criterion proposed by Hwang et al.（Acta Metal. Mater.,1995）. In open circuit, a large depolarization field induced by domain switching makes switching much more diffcult than that in short circuit. Analysis shows that the energy release rate in short circuit is still larger than that in open circuit, and is also larger than the linear result. Consequently,whether using linear or nonlinear fracture analysis, a crack is found easier to propagate in short circuit than in open circuit, which is consistent with the experimental observations of Kounga Njiwa et al.（Eng. Fract. Mech., 2006）.

Universal converse flexoelectricity in dielectric materials via varying electric field direction

Flexoelectricity is a symmetry independent electromechanical cou-pling phenomenon that outperforms piezoelectricity at micro and nanoscales due to its size-dependent behavior arising from gradi-ent terms in its constitutive relations.However,due to this gradient term flexoelectricity,to exhibit itself,requires specially designed geometry or material composition of the dielectric material.First of its kind,the present study put forward a novel strategy of achieving electric field gradient and thereby converse flexoelectri-city,independent of geometry and material composition of the material.The spatial variation of the electric field is established inside the dielectric material,Ba_(0.67)Sr_(0.33)TiO_(3)(BST),by manipulating electrical boundary conditions.Three unique patterns of electrode placement are suggested to achieve this spatial variation.This varying direction of electric field gives rise to electric field gradient,the prerequisite of converse flexoelectricity.A multi-physics cou-pling based theoretical framework is established to solve the flexo-electric actuation by employing isogeometric analysis(IGA).Electromechanically coupled equations of flexoelectricity are solved to obtain the electric field distribution and the resulting displace-ments thereby.The maximum displacements of 0.2 nm and 2.36 nm are obtained with patterns I and II,respectively,while pattern III can yield up to 85 nm of maximum displacement.