Recyclability and Self-Healing of Dynamic Cross-Linked Polyimide with Mechanical/Electrical Damage

Recyclability and self-healing are two most critical factors in developing sustainable polymers to deal with environmental pollution and resource waste.In this work,a dynamic cross-linked polyimide insulation film with full closed-loop recyclability is successfully prepared,which also possesses good self-healing ability after being mechanical/electrical damaged depending on the Schiff base dynamic covalent bonds.The recycled and self-healed polyimide film still maintain its good tensile strength(r t)>60 MPa with Young’s modulus(E)>4 GPa,high thermal stability with glass transition temperature(T g)>220℃,and outstanding insulation property with breakdown strength(E 0)>358 kV mm^(-1),making it a very promising low energy consumption and high temperature resistant insulation material.The strategy of using Schiff base dynamic covalent bonds for reversible repairing the structure of high T g polyimides promotes the wider application of such sustainable and recyclable material in the field of electrical power and micro-electronics.

Delayed neural damage induced by lightning and electrical injury: neural death, vascular necrosis and demyelination?

The structural damage to vascular endothelial cell In a recent article in the journal Brain Injury, four potential hypotheses for delayed neurological disorders following lightning and electrical injury were suggested （Reisner, 2013）. The phenomenon of delayed neurodegenerative syndromes following lighting and electrical injury has been known since the early 1930s （Critchley, 1934）, but to the present day, the mechanisms involved have been poorly un- derstood. An initial and still plausible theory is that the electrical insult causes damage to the vascular structures feeding the spinal cord via damage to vascular endothelial cells （Farrell and Starr, 1968）.

ANALYSIS OF DAMAGE NEAR A CONDUCTING CRACK IN A PIEZOELECTRIC CERAMIC

The finite element formulation for analyzing static damage near a conducting crack in a thin piezoelectric plate is established from the virtual work principle of piezoelectricity.The damage fields under various mechanical and electrical loads are calculated carefully by using an effective iterative procedure.The numerical results show that all the damage fields around a crack tip are fan-shaped and the electric field applied has great influence on the mechanical damage, which is related to the piezoelectric properties.

COMBINED DAMAGE FRACTURE CRITERIA FOR PIEZOELECTRIC CERAMICS

Mechanical and electrical damages are introduced to study the fracture mechanics of piezoelectric ceramics in this paper. Two kinds of piezoelectric fracture criteria are established using the method of least squares combined with a damage analysis of the well-known piezoelectric fracture experiments of Park and Sun’s. One is based on a linear combination of the mechanical and electrical damages and the other on their nonlinear combination. When the combined damage D is up to its critical value Dc, piezoelectric fracture occurs. It is found from the qualitative comparison of the numerical results with the experimental data that the nonlinearly combined damage fracture criterion can give a better prediction of piezoelectric fracture. And it is concluded from the nonlinearly combined damage fracture criterion that a negative electric feld impedes fracture whereas the efect of a positive electric feld on fracture depends on its magnitude.

The influence of various grease compositions and silver nanoparticle additives on electrically induced rolling-element bearing damage

Leakage currents accelerate surface degradation of metal contacts via small scale arcing across lubricating films,but recent observations suggest that metallic nanoparticle additives in lubricants may be useful to improve contact performance.These findings prompted a study that examined electrically induced surface pitting of steel contacts in the presence of several lubricating greases including some containing nanometer-sized colloidal silver(Ag)particles.Reciprocating rolling sphere-on-disk experiments were conducted under electro-tribological loads employing polyurea greases derived from mineral and synthetic base oils with and without additives.Friction forces and electrical resistance were monitored continuously during the tests;surface changes were characterized by means of optical spectroscopy,stylus profilometry,and scanning electron microscopy(SEM)including compositional analysis using energy dispersive spectroscopy(EDS).The observations demonstrate that surface pitting induced by arcing occurs mainly at the points were the rolling motion changes direction and that eroded metal is deposited along the wear grove.Micron-sized pits are formed which contain carbon and oxygen indicating that arcing causes decomposition of the hydrocarbon lubricants.Numerous findings indicate a significant inhibition of pitting is induced by the Ag nanoparticles;some greases containing other additives exhibit a similar,although less pronounced,effect.