Electric Pulse Processing(EPP)treatment was innovatively introduced to optimize the strength and ductility of the CSAMed Cu deposits.The results show that EPP is an efficient and fast post-treatment to improve the str...Electric Pulse Processing(EPP)treatment was innovatively introduced to optimize the strength and ductility of the CSAMed Cu deposits.The results show that EPP is an efficient and fast post-treatment to improve the strength and ductility(within tens of seconds).The larger the pulse current and number of pulses,the better the mechanical properties.Interestingly,this research found that when the heat input determined by pulse current and number of pulses exceeds a certain threshold(pulse current intensity is 2000 A,number of pulses is 10),increasing the number of repeat time could also effectively improve the mechanical properties.A tensile strength of 210 MPa and a ductility of 14.0%could be obtained with reasonable EPP parameters(pulse current intensity is 2000 A,number of pulses is 10,and repeat number is 2),which is similar to those of conventional annealing(e.g.,tensile strength is 272 MPa,elongation is 28.3%).The microstructure evolution analysis shows that EPP can effectively improve the bonding quality between the deposited particles by recrystallization,promote grain growth and the formation of twins,which is the main reason for the improvement of mechanical properties.展开更多
The importance of rapid tooling (RT) and additive manufacturing (AM) appears to be indispensable for boosting the process of manufacturing and expanding the horizon of production technology worldwide. This concept dra...The importance of rapid tooling (RT) and additive manufacturing (AM) appears to be indispensable for boosting the process of manufacturing and expanding the horizon of production technology worldwide. This concept draws the attention of numerous scholars to arrive at a conclusive theory for the widespread utilization of RT. This study attempts to determine the viability and performance of an RT electrode in the field of electro discharge machining (EDM). The electrode prototype is made using an acrylonitrile butadiene styrene (ABS) plastic by fused deposition modeling (FDM), an AM technique, electroplated with copper of desired thickness, and used in die sinking EDM of D2 steel. The scanning electron microscope analysis of the electroplated samples confirms that it is possible to obtain the desired thickness of the metal by electroplating on any electrically conductive surfaces. In the present work, an experimental study is performed for examining the electroplated copper thickness of the plastic EDM electrode and its performances. It is found that the electroplated ABS plastic EDM RT electrode successfully performs the machining operation of D2 steel, and the results are comparable with a solid electrode. The study reveals that the RT electrode can be regarded as a viable tool for rough cutting or semi-finishing cut EDM functions. The experimental results are thoroughly discussed, examined, analyzed, and evaluated for the purpose of developing the appropriate form of the concept.展开更多
基金This work was supported by the National Natural Science Foundation of China(Nos.52061135101,52071265)the Project of the State Key Laboratory of Solidification Processing(Northwestern Polytechnical University,China)(No.2021-TZ-01).
文摘Electric Pulse Processing(EPP)treatment was innovatively introduced to optimize the strength and ductility of the CSAMed Cu deposits.The results show that EPP is an efficient and fast post-treatment to improve the strength and ductility(within tens of seconds).The larger the pulse current and number of pulses,the better the mechanical properties.Interestingly,this research found that when the heat input determined by pulse current and number of pulses exceeds a certain threshold(pulse current intensity is 2000 A,number of pulses is 10),increasing the number of repeat time could also effectively improve the mechanical properties.A tensile strength of 210 MPa and a ductility of 14.0%could be obtained with reasonable EPP parameters(pulse current intensity is 2000 A,number of pulses is 10,and repeat number is 2),which is similar to those of conventional annealing(e.g.,tensile strength is 272 MPa,elongation is 28.3%).The microstructure evolution analysis shows that EPP can effectively improve the bonding quality between the deposited particles by recrystallization,promote grain growth and the formation of twins,which is the main reason for the improvement of mechanical properties.
文摘The importance of rapid tooling (RT) and additive manufacturing (AM) appears to be indispensable for boosting the process of manufacturing and expanding the horizon of production technology worldwide. This concept draws the attention of numerous scholars to arrive at a conclusive theory for the widespread utilization of RT. This study attempts to determine the viability and performance of an RT electrode in the field of electro discharge machining (EDM). The electrode prototype is made using an acrylonitrile butadiene styrene (ABS) plastic by fused deposition modeling (FDM), an AM technique, electroplated with copper of desired thickness, and used in die sinking EDM of D2 steel. The scanning electron microscope analysis of the electroplated samples confirms that it is possible to obtain the desired thickness of the metal by electroplating on any electrically conductive surfaces. In the present work, an experimental study is performed for examining the electroplated copper thickness of the plastic EDM electrode and its performances. It is found that the electroplated ABS plastic EDM RT electrode successfully performs the machining operation of D2 steel, and the results are comparable with a solid electrode. The study reveals that the RT electrode can be regarded as a viable tool for rough cutting or semi-finishing cut EDM functions. The experimental results are thoroughly discussed, examined, analyzed, and evaluated for the purpose of developing the appropriate form of the concept.
