The Challenges in Electrical and Electronic Technology Courses in Vocational Colleges

This paper addresses the challenges in the teaching of electrical and electronic technology in higher vocational colleges and proposes specific countermeasures to improve teaching quality and effectiveness.The countermeasures include optimizing teaching content,emphasizing practical application and innovation,innovating teaching methods,introducing modern instructional approaches,strengthening the teaching team,enhancing teacher quality and practical expertise,upgrading experimental equipment and facilities,enriching curriculum resources,and incorporating digital teaching materials.These measures aim to cultivate high-quality skilled talents,promote social and economic development,and enhance national competitiveness.By adjusting the course structure,incorporating real-world industry cases,and fostering collaboration with enterprises,students can better understand and apply electrical and electronic technology.The introduction of project-based teaching,flipped classrooms,and multimedia technology can enhance student engagement and facilitate independent learning.Furthermore,the improvement of experimental resources and the establishment of online teaching platforms can enhance students’practical skills and provide a variety of learning resources.These measures contribute to the overall improvement of electrical and electronic technology teaching in higher vocational colleges.

Teaching Design and Implementation of the Electrical and Electronic Technology Course Based on Teaching Ability Competition

The teaching ability competition is a vital method for stimulating teachers’enthusiasm and enhancing their teaching skills.This approach has gained increasing attention from colleges and universities in recent years.The competition focuses on evaluating teachers’capabilities in designing and implementing lessons,encouraging the exchange of new educational ideas and high-quality teaching methods.Reforming the teaching of Electrical and Electronic Technology courses based on insights from teaching competitions can significantly improve teaching quality.This paper explores the teaching design and implementation of the Electrical and Electronic Technology course,drawing on the principles of teaching ability competitions.First,it analyzes the existing problems in teaching this course.Then,it highlights the significant benefits that teaching competitions bring to the course.Based on these insights,the paper proposes practical strategies aimed at enhancing students’interest and practical skills,thereby promoting innovative developments in teaching Electrical and Electronic Technology.

Shanghai Huaxin Electronics and Electrical Appliances General Factory

China’s largest electronic piano specialized production factory—the Shanghai Huaxin Electronics and Electrical Appliances General Factory—developed and grew up from a small loss-incurring neighborhood factory a decade ago. At present, the factory’s annual output value has exceeded RMB100 million for three years running, and sales are increasing at a rate of 30 percent per year.

Effects of Si δ-Doping Condition and Growth Interruption on Electrical Properties of InP-Based High Electron Mobility Transistor Structures

The InGaAs/InAIAs/InP high electron mobility transistor （HEM：F） structures with lattice-matched and pseudo- morphic channels are grown by gas source molecular beam epitaxy. Effects of Si ^-doping condition and growth interruption on the electrical properties are investigated by changing the Si-cell temperature, doping time and growth process. It is found that the optimal Si ^-doping concentration （Nd） is about 5.0 x 1012 cm-2 and the use of growth interruption has a dramatic effect on the improvement of electrical properties. The material structure and crystal interface are analyzed by secondary ion mass spectroscopy and high resolution transmission elec- tron microscopy. An InGaAs/InAiAs/InP HEMT device with a gate length of lOOnm is fabricated. The device presents good pinch-off characteristics and the kink-effect of the device is trifling. In addition, the device exhibits fT = 249 GHa and fmax 〉 400 GHz.

Fast Electrical Detection of Carcinoembryonic Antigen Based on AlGaN/GaN High Electron Mobility Transistor Aptasensor

As one of the most important tumor-associated antigens of colorectal adenocarcinoma, the carcinoembryonic antigen （CEA） threatens human health seriously ali over the globe. Fast electrical and highly sensitive detection of the CEA with A1GaN/GaN high electron mobility transistor is demonstrated experimentally. To achieve a low detection limit, the Au-gated sensing area of the sensor is functionalized with a CEA aptamer instead of the corresponding antibody. The proposed aptasensor has successfully detected different concentrations （ranging from 50picogram/milliliter （pg/ml） to 50 nanogram/milliliter （ng/ml）） of CEA and achieved a detection limit as low as 50pg/ml at Vas = 0.5 V. The drain-source current shows a c/ear increase of 11.5μA under this bias.

Electrical and Electronic Waste in Northwest Mexico

The waste derived from Electrical and Electronic Equipment (WEEE) is of interest now worldwide, in some countries due to the rapid technological development and in others due to technological dependence through the acquisition of second hand equipment. Therefore it is necessary to implement strategies for the sustainable management of electrical and electronic equipment at the end of its useful life. This paper presents the results of an investigation that was conducted in a city located in the Northwest of Mexico, which seeks to understand the management practices of household WEEE generators. A survey was applied to a representative sample of the population with a confidence level of 90%. Six home appliances were quantified and it was found that approximately 21% of them are disposed directly as part of the household flow of Municipal Solid Waste (MSW), while 79% are storage for a latter sale, repair or reuse. The results obtained support the need to develop evaluations and to implement possible scenarios for the sustainable management of Electrical and Electronic Waste.

Companies’ E-waste Estimation Based on General Equilibrium The­ory Context and Random Forest Regression Algorithm in Cameroon: Case Study of SMEs Implementing ISO 14001:2015

Given the challenge of estimating or calculating quantities of waste electrical and electronic equipment(WEEE)in developing countries,this article focuses on predicting the WEEE generated by Cameroonian small and medium enterprises(SMEs)that are engaged in ISO 14001:2015 initiatives and consume electrical and electronic equipment(EEE)to enhance their performance and profitability.The methodology employed an exploratory approach involving the application of general equilibrium theory(GET)to contextualize the study and generate relevant parameters for deploying the random forest regression learning algorithm for predictions.Machine learning was applied to 80%of the samples for training,while simulation was conducted on the remaining 20%of samples based on quantities of EEE utilized over a specific period,utilization rates,repair rates,and average lifespans.The results demonstrate that the model’s predicted values are significantly close to the actual quantities of generated WEEE,and the model’s performance was evaluated using the mean squared error(MSE)and yielding satisfactory results.Based on this model,both companies and stakeholders can set realistic objectives for managing companies’WEEE,fostering sustainable socio-environmental practices.

Review of Electrical and Electronic Architectures for Autonomous Vehicles:Topologies,Networking and Simulators

With the rapid development of autonomous vehicles,more and more functions and computing requirements have led to the continuous centralization in the topology of electrical and electronic(E/E)architectures.While certain Tier1 suppliers,such as BOSCH,have previously proposed a serial roadmap for E/E architecture development,implemented since 2015 with significant contributions to the automotive industry,lingering misconceptions and queries persist in actual engineering processes.Notably,there are concerns regarding the perspective of zone-oriented E/E architectures,characterized by zonal concentration,as successors to domain-oriented E/E architectures,known for functional concentration.Addressing these misconceptions and queries,this study introduces a novel parallel roadmap for E/E architecture development,concurrently evaluating domain-oriented and zone-oriented schemes.Furthermore,the study explores hybrid E/E architectures,amalgamating features from both paradigms.To align with the evolution of E/E architectures,networking technologies must adapt correspondingly.The networking mechanisms pivotal in E/E architecture design are comprehensively discussed.Additionally,the study delves into modeling and verification tools pertinent to E/E architecture topologies.In conclusion,the paper outlines existing challenges and unresolved queries in this domain.

The Research and Application of the Anti-Interference Techniques of Electronic Device in Power System

This paper presents the study and application of the electronic device anti-interference techniques underhigh voltage and/or heavy current electro-magnetic circumstance in power system.[

Recovery of Transient Signals in Noise by OptimalThresholding in Wavelet Domain

：研究用离散子波变换复原被加性高斯白噪声污染的瞬态信号．在子波域中提出了一种最佳门限方法，该方法涉及到对于波系数的假设检验，利用似然比、奈曼，皮尔逊准则和最小均方差设计该门限，计算机仿真证明，该方法在较低信噪比下复原信号的有效性．

Comparative studies on hydrometallurgical treatment of smelted low-grade electronic scraps for selective copper recovery

A comparison of three hydrometallurgical methods for selective recovery of copper from low-grade electric and electronic wastes was reported. Scraps were smelted to produce Cu？Zn？Sn？Ag alloy. Multiphase material was analyzed by SEM？EDS and XRD. The alloy was dissolved anodically with simultaneous metal electrodeposition using ammoniacal and sulfuric acid solutions or leached in ammonia？ammonium sulfate solution and then copper electrowinning was carried out. This resulted in the separation of metals, where lead, silver and tin accumulated mainly in the slimes, while copper was transferred to the electrolyte and then recovered on the cathode. The best conditions of the alloy treatment were obtained in the sulfuric acid, where the final product was metal of high purity （99% Cu） at the current efficiency of 90%. Ammoniacal leaching of the alloy led to the accumulation of copper ions in the electrolyte and further metal electrowinning, but the rate of the spontaneous dissolution was low. Anodic dissolution of the alloy in the ammonia？ammonium sulfate solution led to the unfavorable distribution of metals among the slime, electrolyte and cathodic deposit.

Does Foreign Direct Investment Affect the Growth of Local Firms? The Case of China's Electrical and Electronics Industry

Does foreign direct investment （FDI） into developing countries affect the growth of local firms in host countries？ Using a dataset of 38 sectors in China ＇s electrical and electronics industry, in this paper, we analyze whether FDI has a positive effect on loeal firms, with technology spillovers, added value and increasing total faetor productivity, or a negative, market stealing, effect. Estimating the relationship between growth of local firms and investment offoreign firms, our results show that FDI is likely to have a negative impact on the growth of local firms in sectors with large disparities in technology and less experience in business. Therefore, local firms lacking in technology need to find markets with no competition from foreign firms or determine strategies to compensate technology disparities.

Investigation on the Dielectric Properties of CO2 and CO2-Based Gases Based on the Boltzmann Equation Analysis

In this paper, the dielectric properties of CO2, CO2/air, CO2/O2, CO2/N2, CO2/CF4, CO2/CH4, CO2/He, C02/H2, CO2/NH3 and CO2/CO were investigated based on the Boltzmann equation analysis, in which the reduced critical electric field strength （E/N）cr of the gases was derived from the calculated electron energy distribution function （EEDF） by solv- ing the Boltzmann transport equation. In this work, it should be noted that the fundamental data were carefully selected by the published experimental results and calculations to ensure the validity of the calculation. The results indicate that if He, H2, N2 and CH4, in which there axe high ionization coefficients or a lack of attachment reactions, are added into CO2, the dielectric properties will decrease. On the other hand, air, O2, NH3 and CFa （ranked in terms of （E/N）cr value in increasing order） have the potential to improve the dielectric property of CO2 at room temperature.

Energy Transfer from Ce^3＋ to Eu^2＋ in LiSrBO3 and Its Potential Application in UV-LED-Based White LEDs

Ce3＋/Eu2＋ codoped LiSrBO3 phosphor is synthesized, and its luminescent characteristics are investigated. LiSrBO3：Ce3＋,Eu2＋ phosphor exhibits varied hues from blue to white and eventually to yellow by resonance-type energy transfer from Ce3＋ ion to Eu2＋ ion and tuning the relative proportion of Ce3＋/Eu2＋ properly. Energy transfer mechanism in LiSrBOa：Ce3＋, Eu2＋ phosphor is dominated by the dipole-dipole interaction, and the critical distance of the energy transfer is estimated to be about 2 nm by both spectral overlap and concentration quenching methods. Under UV radiation, white light is generated by coupling 436 and 565nm emission bands attributed to Ce3＋ and Eu2＋ radiations, respectively.

Influence of the gassing materials on the dielectric properties of air

Influence of the gassing materials, such as PA6, PMMA, and POM on the dielectric properties of air are investigated. In this work, the fundamental electron collision cross section data were carefully selected and validated. Then the species compositions of the air–organic vapor mixtures were calculated based on the Gibbs free energy minimization. Finally, the Townsend ionization coefficient, the Townsend electron attachment coefficient and the critical reduced electric field strength were derived from the calculated electron energy distribution function by solving the Boltzmann transport equation. The calculation results indicated that H;O with large attachment cross sections has a great impact on the critical reduced electric field strength of the air–organic vapor mixtures. On the other hand, the vaporization of gassing materials can help to increase the dielectric properties of air circuit breakers to some degree.

Photoluminescence of a ZnO/GaN Heterostructure Interface

Growth of a ZnO/GaN heterostructure is carried out using pulsed laser deposition. By etching the ZnO layer from the ZnO/GaN structure, the photoluminescence （PL） of the associated GaN layer shows that the donor- acceptor luminescence of CaN shifts to about 3.27eV, which is consistent with the electroluminescence （EL） of n-ZnO/p-GaN already reported. XPS shows that oxygen diffuses into the CaN crystal lattice from the surface to 20nm depth. The PL spectra at different temperatures and excitation densities show that oxygen plays the role of potential fluctuation. The associated PL results of the interface in these LEDs could be helpful to understand the mechanism of EL spectra for ZnO/CaN p-n junctions.

Second Harmonic Detection of Spin-Dependent Transport in Magnetic Nanostructures

Detection of the second harmonic response of magnetic nanostructures to an ac current is shown to be a very sensitive probe of the magnetization reversal process. A temperature oscillation is obtained by Joule heating instead of using a laser as the heat source, as in thermo-galvanic voltage measurements （TGV）. Joule heating is used to produce a large local temperature gradient in asymmetric Co/Cu/Co spin valves. Evidence is found for an effect of a heat current on magnetization.

Contamination and Remediation of Heavy Metals in Soils near E-waste Recycling Area

In order to assess heavy metals pollution in agricultural soil after renovation in typical e-waste recycling areas, 212 soil samples were col- lected and the mass fractions of 7 kinds of heavy metals （Cd, Cr, Cu, Hg, Ni, Pb and Zn） were analyzed. The results indicated that heavy metals pollution in agricultural soil was commonly existed in the study areas, and the soil was slightly contaminated by Pb but was moderately or critically polluted by Cd and Cu. However, the carcinogenic risk and non-carcinogenic risk status by heavy metals pollution were beyond acceptable levels, and soil remediation was quite necessary. After some investigations of bioremediation, we found that saponin as washing agent could highly strenqthen the behavior of heavy metals desorption from soil ,which had a good prospect of engineering practice.

Methodology for Precious Metal Recovery in Computer Printed Circuit

The life of electronic equipment is becoming increasingly shorter and its replacement always generates a quantity of waste increase, giving rise to a problem of environmental character and still needed new options of solid waste management that will contribute to global sustainable development. Parts of these waste are TCI （the card＇s printed circuit） which containing dangerous elements and turns them into a polluting material from the soil, water and air, being harmful to human health if there is to proper and responsible way, so the recycling of TCI to obtain precious metals is an example of industrial materials that can be recycled. Despite this, large quantities of these are not recycled and some others are not considered. The objective of this work is to present a systematic and ecological methodology for the recovery of valuable materials contained in parts of used in computers, circuit boards using a leaching process. The method determines a set of variables to evaluate the kinetics of the reaction and the leaching of metals that form the substrate of metal and to establish the parameters that affect the rate of leaching of metals through a sensitivity analysis, to identify design alternatives. It determines the quantity and percentages that constitutes the motherboard, processor, video cards, accelerator graphics, network and memory cards RAM, among others and its content of metals such as Cu, Fe, Ag, Au and Pt.

Ultraviolet Sensitive Ultrafast Photovoltaic Effect in Tilted KTaO3 Single Crystals

An ultraviolet sensitive ultrafast photovoltaic effect is observed in tilted 10° KTaO3 （KT） single crystals. The rise time of the transient photovoltaic pulse is 497.4 ps and the full width at half maximum is 974.6 ps under irradiation of a 266 nm laser pulse with 25 ps duration. An open-circuit photovoltage sensitivity of 328 mV/mJ and a photocurrent sensitivity of 460 mA/mJ are obtained. The experimental results demonstrate the potential applications of KT single crystals in ultraviolet detection.