The electrically excited synchronous motor(ESM)has typically small synchronous inductance values and quite low transient values because of the damper windings mounted on the rotor.Therefore,the torque and stator flux ...The electrically excited synchronous motor(ESM)has typically small synchronous inductance values and quite low transient values because of the damper windings mounted on the rotor.Therefore,the torque and stator flux linkage ripples are high in the direct torque control(DTC)drive of the ESM with a torque and flux linkage hysteresis controller(basic DTC).A DTC scheme with space vector modulation(SVM)for the ESM was investigated in this paper.It is based on the compensation of the stator flux link-age vector error using the space vector modulation in order to decrease the torque and flux linkage ripples and produce fixed switching frequency under the principle that the torque is controlled by the torque angle in the ESM.Compared with the basic DTC,the results of the simulation and experiment show that the torque and flux linkage ripples are reduced,the maximum current value is decreased during the startup,and the current distortion is much smaller in the steady-state under the SVM-DTC.The field-weakening control is incorporated with the SVM-DTC successfully.展开更多
基金supported by the Aeronautics Key Science Foundation of China(No.98Z52001)the Fifteen Aeronautics Pre-research Item of China(No.40200201).
文摘The electrically excited synchronous motor(ESM)has typically small synchronous inductance values and quite low transient values because of the damper windings mounted on the rotor.Therefore,the torque and stator flux linkage ripples are high in the direct torque control(DTC)drive of the ESM with a torque and flux linkage hysteresis controller(basic DTC).A DTC scheme with space vector modulation(SVM)for the ESM was investigated in this paper.It is based on the compensation of the stator flux link-age vector error using the space vector modulation in order to decrease the torque and flux linkage ripples and produce fixed switching frequency under the principle that the torque is controlled by the torque angle in the ESM.Compared with the basic DTC,the results of the simulation and experiment show that the torque and flux linkage ripples are reduced,the maximum current value is decreased during the startup,and the current distortion is much smaller in the steady-state under the SVM-DTC.The field-weakening control is incorporated with the SVM-DTC successfully.