Influence of alloy components on arc erosion morphology of Ag/MeO electrical contact materials

Arc erosion morphologies of Ag/MeO（10） electrical contact materials after 50000 operations under direct current of 19 V and 20 A and resistive load conditions were investigated using scanning electron microscope（SEM） and a 3D optical profiler（3DOP）. The results indicated that 3DOP could supply clearer and more detailed arc erosion morphology information. Arc erosion resistance of Ag/SnO_2（10） electrical contact material was the best and that of Ag/CuO（10） was the worst. Arc erosion morphology of Ag/MeO（10） electrical contact materials mainly included three different types. Arc erosion morphologies of Ag/ZnO（10） and Ag/SnO_2（10） electrical contact materials were mainly liquid splash and evaporation, and those of Ag/CuO（10） and Ag/CdO（10） were mainly material transfer from anode to cathode. Arc erosion morphology of Ag/SnO_2（6）In_2O_3（4） electrical contact materials included both liquid splash, evaporation and material transfer. In addition, the formation process and mechanism on arc erosion morphology of Ag/MeO（10） electrical contact materials were discussed.

Preparation and microstructure characterization of a nano-sized Ti^(4+)-doped AgSnO_2 electrical contact material

A Ti^4＋-doped nano-structured AgSnO2 material was prepared using sol-gel method and characterized by X-ray diffraction （XRD）, transmission electron microscopy （TEM）, and scanning electron microscopy （SEM）. The results show that Ti^4＋ cations are successfully doped into the crystal lattice of SnO2, and thus significantly improve the electrical conductivity of the sample. Furthermore, the coating of Ag on Ti^4＋-doped SnO2 nano-sized particles enhances the surface wettability and enables the resulting AgSnO2 material to have better mechanical properties.

Effects of silver powder particle size on the microstructure and properties of Ag-Yb_2O_3 electrical contact materials prepared by spark plasma sintering

mg-Yb203 electrical contact materials were fabricated by spark plasma sintefing （SPS）. The effects of silver powder particle size on the microstructure and properties of the samples were investigated. The surface morphologies of the sintered samples were examined by optical microscope （OM）, and the fracture morphologies were observed by scanning electron microscopy （SEM）. The physical and mechanical properties such as density, electrical resistivity, microhardness, and tensile strength were also tested. The results show that the silver powder particle size has evident effects on the sintered materials. Comparing with coarse silver powder （5 ktm）, homogeneous and fme microstmcture was obtained by fine silver powder （_〈0.5-1am）. At the same time, the electrical conductivity, microhardness, and tensile strength of the sin- tered samples with fine silver powder were higher than those of the samples with coarse silver powder. However, silver powder particle size has little influence on the relative densities, which of all samples （both by free and coarse silver powders） is more than 95%. The fracture characteristics are ductile.

Influence of operation number on arc erosion behavior of Ag/Ni electrical contact materials

Arc erosion behavior of Ag/Ni materials with different operation numbers was investigated by OM,3DOP and SEM.The results indicated that the arc erosion of Ag/10Ni electrical contact material fabricated by sintering−extrusion technology was more and more serious with the operation numbers increasing from 1000 to 40000.With the same operation numbers,the arc erosion on anode was more serious than that on cathode.Besides,the pores preferred to emerge around the arc effect spot during the first 10000 operations.And the morphology of the molten silver on cathode and anode was different due to the action of gravity and arc erosion.Furthermore,the relationships among arc energy,arc time,welding force,electric resistivity,temperature and mass change on contacts were discussed,which indicated that the mass loss on cathode was mainly caused by the fracture of molten bridge.

Realization of a novel Ag/SnO_2 electrical contact material with microscopic fiber-like structure

According to the principle that fiber-like arrangement of reinforcing particles SnO2 paralleling to the direction of current is propitious to the electrical and mechanical performance of the electrical contact materials, we proposed and reported a novel precursor route used to prepare Ag/SnO,. electrical contact material with fiber- like arrangement of reinforcing nanoparticles. The mechanism for the formation of fiber-like arrangement of rein- forcing nanoparticles in Ag/SnO2 electrical contact material was also discussed. The as-prepared samples were char- acterized by means of scanning electron microscope （SEM）, optical microscope （OM）, energy-dispersive X-ray spectroscopy （EDX）, MHV2000 microhardness test, and double bridge tester. The analysis showed that the as-prepared Ag/SnO,, electrical contact material with fiber-like arrangement of reinforcing nanoparticles exhibits a high elongation of 24 %, a particularly low electrical resistivity of 2.08 μΩ. cm, and low arcing energy, and thus has considerable technical, economical and environmental benefits.

STUDY ON THE STRUCTURE, ELECTRICAL PROPERTIES AND CONDUCTION MECHANISM 0F THE MULTICRYSTAL MULTIPHASE MATERIAL Li_2MO_2-xWxO_6

The conductivity of non-crystalline fast ionic conductor for B_2O_3-Li_2O-LiCl-Al_2O_3 system is studiedin this paper. The glass structure of this system is discussed by means of infrared spectrum and X-ray fluorescence analysis, and the effects of LiCl and A1_2O_3 on the conductivity of Li^+ in the system are studied as well. Adding Li_2O to the system gives rise to transfer from [BO_3] triangular units to [BO_4] tetrahedral. When Li_2O content exceeds 30mol%, the main group of the glass is the diborate group with more [BO_4] tetrahedra. The adding of LiCl has no obvious influence on the glass structure, and LiCl is under a state dissociated by network, but with the increase of LiCl, the increase of conductivity is obvious. By adding A1_2O_3, the glass can be formed when the room-temperature is cooling down,the conductivity decreases while the conductive activatory energy increases for the glass. The experiment shows that conductivity in the room-temperature is σ= 6.2×10^(-6)Ω^(-1)cm^(-1), when at 300℃, the σ=6.8×10^(-3)Ω^(-1)cm^(-1). The conductive activatory energy computed is 0.6～1.0eV.

Automatic Driving Material Handling Vehicle Station Location and Scheduling Mathematical Modeling and Analysis

Traditional material handling vehicles often use internal combustion engines as their power source, which results in exhaust emissions that pollute the environment. In contrast, automated material handling vehicles have the advantages of zero emissions, low noise, and low vibration, thus avoiding exhaust pollution and providing a more comfortable working environment for operators. In order to achieve the goals of “peaking carbon emissions by 2030 and achieving carbon neutrality by 2060”, the use of environmentally friendly autonomous material handling vehicles for material transportation is an inevitable trend. To maximize the amount of transported materials, consider peak-to-valley electricity pricing, battery pack procurement, and the construction of charging and swapping stations while achieving “minimum daily transportation volume” and “lowest investment and operational cost over a 3-year settlement period” with the shortest overall travel distance for all material handling vehicles, this paper examines two different scenarios and establishes goal programming models. The appropriate locations for material handling vehicle swapping stations and vehicle battery pack scheduling schemes are then developed using the NSGA-II algorithm and ant colony optimization algorithm. The results show that, while ensuring a daily transportation volume of no less than 300 vehicles, the lowest investment and operational cost over a 3-year settlement period is approximately 24.1 million Yuan. The material handling vehicles follow the shortest path of 119.2653 km passing through the designated retrieval points and have two shortest routes. Furthermore, the advantages and disadvantages of the proposed models are analyzed, followed by an evaluation, deepening, and potential extension of the models. Finally, future research directions in this field are suggested.

Effects of Rare Earths on Electrical Conductivity, Melting-Welding and Corrosion Resistance by Electric Arc of Copper-Based Alloys

The effects of rare earths on electric conductivity fusion welding-resistance and erosion-resistance by electric arc of copper-based compound material by adding different amount of rare earths to copper base to get copper based compound materials were studied. Rare earths improve active ability among interfaces and optimize organizational structures. The conductivity of samples with rare earths is obviously better than that of materials without them. Moreover, wear ability and oxidization resistance of materials with rare earths can be improved greatly. For copper contact head with rare earths, electric arc corrosion resistance and welding-melting resistance are improved. Such alloys also decrease resistance change with increasing temperature. But the adding quantity of rare earths should be appropriate and formed handicraft should be properly regulated.

Characterization of structural and electrical properties of ZnO tetrapods

ZnO tetrapods were synthesized by a typical thermal vapor-solid deposition method in a horizontal tube furnace.Structural characterization was carried out by transmission electron microscopy （TEM） and select-area electron diffraction （SAED）,which shows the presence of zinc blende nucleus in the center of tetrapods while the four branches taking hexagonal wurtzite structure.The electrical transport property of ZnO tetrapods was investigated through an in-situ nanoprobe system.The three branches of a tetrapod serve as source,drain,and ＂gate＂,respectively;while the fourth branch pointing upward works as the force trigger by vertically applying external force downward.The conductivity of each branch of ZnO-tetrapods increases 3-4 times under pressure.In such situation,the electrical current through the branches of ZnO tetrapods can be tuned by external force,and therefore a simple force sensor based on ZnO tetrapods has been demonstrated for the first time.

Influence of the gassing materials on the dielectric properties of air

Influence of the gassing materials, such as PA6, PMMA, and POM on the dielectric properties of air are investigated. In this work, the fundamental electron collision cross section data were carefully selected and validated. Then the species compositions of the air–organic vapor mixtures were calculated based on the Gibbs free energy minimization. Finally, the Townsend ionization coefficient, the Townsend electron attachment coefficient and the critical reduced electric field strength were derived from the calculated electron energy distribution function by solving the Boltzmann transport equation. The calculation results indicated that H;O with large attachment cross sections has a great impact on the critical reduced electric field strength of the air–organic vapor mixtures. On the other hand, the vaporization of gassing materials can help to increase the dielectric properties of air circuit breakers to some degree.

Uncover the Aesthetic Simplicity Associated with Mass Transfer in Energy Materials

Aesthetics,referred frequently to as a philosophical term,has played a starring role in forming and evolving a number of aspects of human society,including arts,politics,economics,ethics,etc.Indeed,exploring and investigating the aesthetic phenomena in the scientific field have aroused insightful research findings,which in turn has stimulated research interests in such a science-aesthetics field.In particular,better-evaluated aesthetic aspects of the materials field are expected to be uncovered upon the exceedingly-exposed fundamental breakthroughs in researching the basic structure and functionality of materials.In this report,we glimpse into the aesthetic simplicity of energy materials and comprehend specifically the mass transfer functionalities of key categories of energy materials through an intuitive and bottom-up approach.Our effort aspires to shed new lights on the functionality understanding and manipulation of functional materials in general.

Thermal stability and electrical transport properties of Ge/Sn-codoped single crystalline β-Zn4Sb3 prepared by the Sn-flux method

This study prepares a group of single crystalline β-Zn_4Sb_3 with Ge and Sn codoped by the Sn-flux method according to the nominal stoichiometric ratios of Zn_（4.4）Sb_3 Ge_xSn_3（x = 0–0.15）. The prepared samples possess a metallic luster surface with perfect appearance and large crystal sizes. The microscopic cracks or defects are invisible in the samples from the back-scattered electron image. Except for the heavily Ge-doped sample of x = 0.15, all the samples are single phase with space group R3c. The thermal analysis results show that the samples doped with Ge exhibit an excellent thermal stability.Compared with the polycrystalline Ge-substituted β-Zn_4Sb_3, the present single crystals have higher carrier mobility, and hence the electrical conductivity is improved, which reaches 7.48×10~4S·m^（-1） at room temperature for the x = 0.1 sample.The change of Ge and Sn contents does not improve the Seebeck coefficient significantly. Benefiting from the increased electrical conductivity, the sample with x = 0.075 gets the highest power factor of 1.45×10^（-3）W·m^（-1）·K^（-2） at 543 K.

High-speed imaging observation on molten bridges of AgNi10 electrical contact material

The electrical contact-high-speed imaging experimental system was developed to investigate the molten bridge phenomena of AgNi10 electrical contact material.The dimension of molten bridges was measured along with the measurement of waveforms in the contact voltage under the load of direct current(DC) 6 V(8-20 A)and breaking speed of 50.0 mm·s^(-1).A part of the observed results was presented as well as surface morphology of the contacts after electrical contact behavior,which shows some interesting and new phenomena.Molten bridges and arc could exist simultaneously.The stable molten bridge looks like cylindrical shape and then becomes needle tip at its rupture,the diameter and length of molten bridges both increase with the increase in current and the growth gradient of the diameter is larger than that of the length.The morphology and elemental distribution of the contact surface are changed by the behavior of electrical contact.

Production of Ag-ZnO powders by hot mechanochemical processing

Ag–CdO composites are still one of the most commonly used electrical contact materials in low-voltage applications owing to their excellent electrical and mechanical properties.Nevertheless,considering the restriction on using Cd due to its toxicity,it is necessary to find alternative materials that can replace these composites.In this study,the synthesis of Ag-ZnO alloys from Ag-Zn solid solutions was investigated by hot mechanochemical processing.The hot mechanochemical processing was conducted in a modified attritor mill at 138℃under flowing O2 at 1200 cm3/min for 3.0 h.The microstructure and phase evolution were investigated using X-ray diffractometry,field emission gun scanning electron microscopy and transmission electron microscopy.The results suggest that it is possible to complete the oxidation of Ag-Zn solid solution by hot mechanochemical processing at a low temperature and short time.This novel synthesis route can produce Ag-ZnO composites with a homogeneous distribution of nanoscale ZnO precipitates,which is impossible to achieve using the conventional material processing methods.Considering the fact that the fundamental approach to improving electric contact material performance resides in obtaining uniform dispersion of the second-phase in the Ag matrix,this new processing route could open the possibility for Ag-ZnO composites to replace non-environmentally friendly Ag-CdO.

Microstructure and properties evolution of in-situ fiber-reinforced Ag-Cu-Ni-Ce alloy during deformation and heat treatment

Silver-based alloys are significant light-load electrical contact materials(ECMs).The trade-off between mechanical properties and electrical conductivity is always an important issue for the development of silver-based ECMs.In this paper,we proposed an idea for the regulation of the mechanical properties and the electrical conductivity of Ag-11.40Cu-0.66Ni-0.05Ce(wt%)alloy using in-situ composite fiber-reinforcement.The alloy was processed using rolling,heat treatment,and heavy drawing,the strength and electrical conductivity were tested at different deformation stages,and the microstructures during deformation were observed using field emission scanning electron microscope(FESEM),transmission electron microscope(TEM)and electron backscatter diffraction(EBSD).The results show that the method proposed in this paper can achieve the preparation of in-situ composite fiber-reinforced Ag-Cu-Ni-Ce alloys.After the heavy deformation drawing,the room temperature Vickers hardness of the as-cast alloy increased from HV 81.6 to HV 169.3,and the electrical conductivity improved from 74.3%IACS(IACS,i.e.,international annealed copper standard)to 78.6%IACS.As the deformation increases,the alloy strength displays two different strengthening mechanisms,and the electrical conductivity has three stages of change.This research provides a new idea for the comprehensive performance control of high-performance silver-based ECMs.

Synergistic effect of chitin nanofibers and polyacrylamide on electrochemical performance of their ternary composite with polypyrrole

Development of simple methods for preparation of polymeric electrode materials with nanofibrous network structure is a perspective way toward cheap supercapacitors with high specific capacitance and energy density. In this work one-pot synthesis of electroactive ternary composite based on polypyrrole, polyacrylamide and chitin nanofibers with beneficial morphology was elaborated. Ternary system demonstrates better electrochemical performance in comparison with both polypyrrole–polyacrylamide and polypyrrole–chitin binary composites. Possible mechanism of synergistic effect of simultaneous influence of polyacrylamide and chitin nanofibers on the formation of composite＇s structure is discussed.The highest attained specific capacitance of electroactive polypyrrole in ternary composite reached 249 F/g at 0.5 A/g and 150 F/g at 32 A/g. Symmetrical supercapacitor was assembled using the elaborated electrode material. High specific capacitance 89 F/g and good cycling stability with capacitance retention of 90% after 3000 cycles at 2 A/g were measured.

Study on the Pyrolytic Carbon Generated by the Electric Heating CVD Method

A new method of fabricating C/C composite materials, namely electric heating CVD method, was used, which electrified the carbon fiber directly by using the conductivity of itself. Acetylene was used as the carbon source with nitrogen as dilution gas, and the pyrolytic carbon started to deposit on the carbon fiber surface when the deposition temperature was reached. The morphology of pyrolytic carbon was characterized by SEM, and the surface properties of carbon fibers before and after CVD were characterized by Raman spectroscopy. The experimental results show that the electric heating method is a novel method to fabricate C/C composite materials, which can form a dense C/C composite material in a short time. The order degree and the average crystallite size of the carbon fiber surface were decreased after the experiment.

An Optical Investigation of Silver Nanoclusters Composite Soda-lime Glass Formed by Electric Field Assisted Diffusion

Silver nanoclusters（NCs） embedded in soda-lime glass was synthesized by the electric fieldassisted diffusion（EFAD） and successive annealing. The samples were characterized by UV-Vis absorption spectroscopy, photoluminescence spectroscopy, X-ray photoelectron spectroscopy（XPS）, and lifetime measurements. The experimental results show that the growth of silver clusters is favored by the annealing temperature and dwell time. The as-diffused and annealed glass samples show photoluminescence around 550 nm under UV excitation, which can be associated with the presence of L-center and Ag3~＋ cluster. And the increasing of the annealing temperature and dwell time results in an appearance of the SPR peak and the decreasing of the luminescence intensities because the Ag3~＋ clusters grow up into the Ag nanoparticles.

Wear-resistant Ag-MAX phase 3D interpenetrating-phase composites:Processing,structure,and properties

Electrical contact materials are generally Ag-or Cu-based composites and play a critical role in ensuring the reliability and efficiency of electrical equipments and electronic instruments.The MAX(M is an early transition metal,A is an element from III or IV main groups,and X is carbon or/and nitrogen)phase ceramics display a unique combination of properties and may serve as an ideal reinforcement phase for electrical contact materials.The biological materials evolved in nature generally exhibit three-dimensional(3D)interpenetrating-phase architectures,which may offer useful inspiration for the architectural design of electrical contact materials.Here,a series of bi-continuous Ag-Ti_(3)SiC_(2) MAX phase composites with high ceramic contents exceeding 50 vol.%and having micron-and ultrafine-scaled 3D interpenetrating-phase architectures,wherein both constituents were continuous and mutually interspersed,were exploited by pressureless infiltration of Ag melt into partially sintered Ti_(3)SiC_(2) scaffolds.The mechanical and electrical properties as well as the friction and wear performance of the composites were investigated and revealed to be closely dependent on the ceramic contents and characteristic structural dimensions.The composites exhibited a good combination of properties with high hardness over 2.3 GPa,high flexural strength exceeding 530 MPa,decent fracture toughness over 10 MPa·m^(1/2),and good wear resistance with low wear rate at an order of 10^(-5)mm^(3)/(N·m),which were much superior compared to the counterparts made by powder metallurgy methods.In particular,the hardness,electrical conductivity,strength,and fracture toughness of the composites demonstrated a simultaneous improvement as the structure was refined from micron-to ultrafine-scales at equivalent ceramic contents.The good combination of properties along with the facile processing route makes the Ag-Ti_(3)SiC_(2)3D interpenetrating-phase composites appealing for electrical contact applications.