Electrically and Optically Bistable Operation in an Integration of a 1310 nm DFB Laser and a Tunneling Diode

We experimentally demonstrate an In P-based hybrid integration of a single-mode DFB laser emitting at around 1310 nm and a tunneling diode. The evident negative differential resistance regions are obtained in both electrical and optical output characteristics. The electrical and optical bistabilities controlled by the voltage through the tunneling diode are also measured. When the voltage changes between 1.46 V and 1.66 V, a 200-mV-wide hysteresis loop and an optical power ON/OFF ratio of 17 dB are obtained. A side-mode suppression ratio of the integrated device in the ON state is up to 43 dB. The tunneling diode can switch on/off the laser within a very small voltage range compared with that directly controlled by a voltage source.

Identification of Key Links in Electric Power Operation Based-Spatiotemporal Mixing Convolution Neural Network

As the scale of the power system continues to expand,the environment for power operations becomes more and more complex.Existing risk management and control methods for power operations can only set the same risk detection standard and conduct the risk detection for any scenario indiscriminately.Therefore,more reliable and accurate security control methods are urgently needed.In order to improve the accuracy and reliability of the operation risk management and control method,this paper proposes a method for identifying the key links in the whole process of electric power operation based on the spatiotemporal hybrid convolutional neural network.To provide early warning and control of targeted risks,first,the video stream is framed adaptively according to the pixel changes in the video stream.Then,the optimized MobileNet is used to extract the feature map of the video stream,which contains both time-series and static spatial scene information.The feature maps are combined and non-linearly mapped to realize the identification of dynamic operating scenes.Finally,training samples and test samples are produced by using the whole process image of a power company in Xinjiang as a case study,and the proposed algorithm is compared with the unimproved MobileNet.The experimental results demonstrated that the method proposed in this paper can accurately identify the type and start and end time of each operation link in the whole process of electric power operation,and has good real-time performance.The average accuracy of the algorithm can reach 87.8%,and the frame rate is 61 frames/s,which is of great significance for improving the reliability and accuracy of security control methods.

Optimization of power input diagram of 50 t UHP-EAF

In order to improve operation for shortening tap to tap time and saving electrical energy, on the base of no-linear reactance model, the electrical characteristics of the 50 t UHP-EAF in Fushun Special Steel Co. Ltd. were analyzed. Considering steelmaking process conditions, the optimum power-input diagrams were investigated, which can save energy, lower consumption, and raise productivity. This has been verified by production contrast tests. Application of the optimum curve in 50 t UHP-EAF indicates that research method is correct, the 50 t UHP-EAF runs smoothly with lowering electrical energy by 29.35 kW.h/t and shortening power on time by 3 min. The general steps of making optimum power-input specification is also given.

Optimization of power input diagram of 50 t UHP-EAF

In order to improve operation for shortening tap to tap time and savingelectrical energy, on the base of no-linear reactance model, the electrical characteristics of the50 t UHP-EAF in Fushun Special Steel Co. Ltd. were analyzed. Considering steelmaking processconditions, the optimum power-input diagrams were investigated, which can save energy, lowerconsumption, and raise productivity. This has been verified by production contrast tests.Application of the optimum curve in 50 t UHP-EAF indicates that research method is correct, the 50 tUHP-EAF runs smoothly with lowering electrical energy by 29.35 kW-h/t and shortening power on timeby 3 min. The general steps of making optimum power-input specification is also given.

Kirk effect and suppression for 20 V planar active-gap LDMOS

For 20 V planar active-gap lateral double-diffused MOSFET （LDMOS）, the sectional channel is utilized to decrease the electric field in the n-drift region below the poly gate edge in the off-state, compared with the conventional single channel. Then the n-drift concentration can be increased to decrease the Kirk effect, while keeping off-state breakdown voltage Vbd unchanged. Meanwhile the influence of the n-drift concentration and the n-drift length Ldrift （the drain n＋ diffusion to gate spacing） which are related to the Kirk effect is discussed. The trade-offs between Rdson.Area, breakdown voltage Vbd and the electrical safe operating area （e-SOA） performance of LDMOS are considered also. Finally the proposed planar active-gap LDMOS devices with varied values of Ldria are experimentally demonstrated. The experimental results show that the Kirk effect can be greatly suppressed with slight increase in the Rdson.Area parameter.