Intelligent Vehicle Electrical Power Supply System with Central Coordinated Protection

The current research of vehicle electrical power supply system mainly focuses on electric vehicles（EV） and hybrid electric vehicles（HEV）.The vehicle electrical power supply system used in traditional fuel vehicles is rather simple and imperfect;electrical/electronic devices（EEDs） applied in vehicles are usually directly connected with the vehicle＇s battery.With increasing numbers of EEDs being applied in traditional fuel vehicles,vehicle electrical power supply systems should be optimized and improved so that they can work more safely and more effectively.In this paper,a new vehicle electrical power supply system for traditional fuel vehicles,which accounts for all electrical/electronic devices and complex work conditions,is proposed based on a smart electrical/electronic device（SEED） system.Working as an independent intelligent electrical power supply network,the proposed system is isolated from the electrical control module and communication network,and access to the vehicle system is made through a bus interface.This results in a clean controller power supply with no electromagnetic interference.A new practical battery state of charge（So C） estimation method is also proposed to achieve more accurate So C estimation for lead-acid batteries in traditional fuel vehicles so that the intelligent power system can monitor the status of the battery for an over-current state in each power channel.Optimized protection methods are also used to ensure power supply safety.Experiments and tests on a traditional fuel vehicle are performed,and the results reveal that the battery So C is calculated quickly and sufficiently accurately for battery over-discharge protection.Over-current protection is achieved,and the entire vehicle＇s power utilization is optimized.For traditional fuel vehicles,the proposed vehicle electrical power supply system is comprehensive and has a unified system architecture,enhancing system reliability and security.

Investing and Pricing with Supply Uncertainty in Electricity Market:A General View Combining Wholesale and Retail Market

Renewable energy,such as wind and solar energy,may vary signifi cantly over time and locations depending on the weather and the climate conditions.This leads to the supply uncertainty in the electricity(power) market with renewable energy integrated to power grid.In this paper,electricity in the market is classified into two types:stablesupply electricity(SSE) and unstablesupply electricity(USE).We investigate the investment and pricing strategies under the electricity supply uncertainty in wholesale and retail electricity market.In particular,our model combines the wholesale and retail market and capture the dominant players,i.e.,consumers,power plant(power operator),and electricity supplier.To derive the market behaviors of these players,we formulate the market decision problems as a multistage Stackelberg game.By solving the game model,we obtain the optimal,with closedform,wholesale investment and retail pricing strategy for the operator.We also obtain the energy supplier's best price mechanism numerically under certain assumption.We fi nd the price of SSE being about 1.4 times higher than that of USE will benefi t energy supplieroptimally,under which power plant's optimal strategy of investing is to purchase USE about 4.5 times much more than SSE.

Reliability Analyses of Transmission and Substation Facilities and Electricity Supply to Urban Consumers in 2007

Reliabilities of transmission and substation facilities with voltage levelof220 kVoraboveIn 2007, there were totally 356 power supply enterprises, including 28 EHV transmission and substation enterprises, and 245 power generation enterprises submitting reliability performances of electric facilities at a voltage level of 220 kV or above to the Electric Power Reliability Management Center. The reliability indices of transmission and

Tight electricity supply to return during winter

According to the National Development and Reform Commission (NDRC), China's power supply will be tight this winter after a brief autumn respite because of a demand spike and

Statistical Analysis and Energy Planning of Electric Power Supply Systems with Intelligent Control

The study presents possibilities for reconstruction of electric power supply systems in Bulgarian Black Sea resorts and possibilities to use statistical methods in energy planning. The paper shows the use of classic statistical methods in combination with advanced digital measurement systems in order to obtain the correlation dependencies, nature of energy consumption and opportunities for energy forecasting. The main purpose of the study is to obtain statistical dependencies of the nature of power consumption and correlations between electricity consumption and ambient temperature in order to improve the accuracy of energy planning. The analysis includes application of energy management systems for proper energy planning, improving economical efficiency and reducing power and energy losses.

NOVEL AIRCRAFT ELECTRICAL POWER DISTRIBUTION SYSTEM BASED ON DISTRIBUTED COMPUTER

As a matured technique used in many fields,the distributed computer system is still a new management method for the aeronautical electrical power distribution system in our country. In this paper, a novel aircraft electrical power distribution system based on the distributed computer system is proposed. The principles, features and structure of the aircraft electrical power distribution system and the distributed computer system named electrical load management system (ELMS) are studied. The ELMS composed of four electrical load management centers (ELMCs) and two power source processors (PSPs) operates in the 1553B buses. Principles of the ELMCs and the PSPs are introduced. With the application of the distributed computer system, the aircraft electrical power distribution system is simple, adaptable and flexible.

Current State of Energy Production in Cameroon and Projection for 2035

The low electricity supply rate is a major cause of underdevelopment in Cameroon. To address this issue, Cameroon outlined a strategy in 2003 aiming for a production capacity of 3000 MW by 2020. However, by 2020, production had only reached 1040 MW, leading Cameroon to devise a new national energy sector development strategy targeting 5000 MW by 2035. This paper provides an overview of the current state of energy production and projects future output by 2035. Scientific articles and investigative reports on energy production in Cameroon have enabled an assessment of the current electrical energy production. The 2035 production estimate is based on the Energy Sector Development Projects (PDSEN) report in Cameroon. The current production is estimated at around 1600 MW. Considering the ongoing construction of power plants, future projects, and financing delays, achieving the 5000 MW goal by 2035 appears challenging. Nonetheless, diversifying energy production sources could bring Cameroon closer to this target.

Uplifting the complexity of analysis for probabilistic security of electricity supply assessments using artificial neural networks

The energy sector faces rapid decarbonisation and decision-makers demand reliable assessments of the security of electricity supply. For this, detailed simulation models with a high temporal and technological resolution are required. When confronted with increasing weather-dependent renewable energy generation, probabilistic simulation models have proven. The significant computational costs of calculating a scenario, however, limit the complexity of further analysis. Advances in code optimization as well as the use of computing clusters still lead to runtimes of up to eight hours per scenario. However ongoing research highlights that tailor-made approximations are potentially the key factor in further reducing computing time. Consequently, current research aims to provide a method for the rapid prediction of widely varying scenarios. In this work artificial neural networks (ANN) are trained and compared to approximate the system behavior of the probabilistic simulation model. To do so, information needs to be sampled from the probabilistic simulation in an efficient way. Because only a limited space in the whole design space of the 16 independent variables is of interest, a classification is developed. Finally it required only around 35 min to create the regression models, including sampling the design space, simulating the training data and training the ANNs. The resulting ANNs are able to predict all scenarios within the validity range of the regression model with a coefficient of determination of over 0.9998 for independent test data (1.051.200 data points). They need only a few milliseconds to predict one scenario, enabling in-depth analysis in a brief period of time.

Development of Simulated Testbed for Electrical Power Subsystem of a Certain Kind of Satellite

In order to testify and examine the ability and correctness of an expert system for diagnosing the faults in the electrical power system of a certain kind of satellite, the authors have developed a simulated testbed according to the operational principle of the electrical power system. This paper takes the solar battery array as an instance to introduce the designing principle of its hardware circuits, and presents the methods to design the interface and the software program of the single-chip microprocessor system. The software scheme of the upper computer is introduced at the end of this paper. It has been proved that this simulated system could effectively achieve the complete functions coupled with the simple design by using of various mature techniques in the fields of electronic circuits, single-chip microprocessor and numerical emulation.

THE PROSPECTIVE OF NEW TECHNOLOGY DEVELOPMENT FOR SUSTAINABLE ELECTRIC POWER SUPPLY IN CHINA

China is a large developing country with rapid growth rate. To the year 2050, its electric power will be increased by six to eight times, reaching 1.5—1.8 TW total installed capacity. The development can not only rely on the existing technology, it is crucial to accelerate the new technology development. This article discusses the perspective of various new technologies from the available energy resources and the required increase of electric power.

Study on Transformer Magnetic Biasing Control Method for AC Power Supplies

This paper presents a novel transformer magnetic biasing control method for high-power high-performance AC power supplies. Serious consequences due to magnetic biasing and several methods to overcome magnetic biasing are first discussed. The causes of the transformer magnetic biasing are then analyzed in detail. The proposed method is based on a high-pass filter inserted in the forward path and the feedforward control. Without testing magnetic biasing of transformer, this method can eliminate magnetic biasing of transformer completely in real-time waveform feedback control systems though the zero error of the Hall effect sensors varies with time and temperature. The method has already been employed in a 90KVA AC power supply. It is shown that it offers improved performance over existing ones. In this method, no sensors are used such that the zero error of the Hall effect sensors has not any influence on the system. It is simple to design and implement. Furthermore, the method is suitable for various power applications.

Electro Energetic Technological Control in Eastern Siberia Railway

By system analysis and imitating modeling authors show the most effective modern techniques for railway electric systems control. Modem measure technologies PMU-WAMS and smart grid allow to solve real time tasks of centralizing control of railway electric systems. Quantity characteristics of control effectiveness are determined. According to computer modeling the situation approach is available for practical tasks of railway electric system control.

Future Market of Small Reactors and Feasibility Study in Mongolia

The relation between the implementation time of small reactor and its market was studied if small reactor could be implemented to be utilized as a base load operation. If the small reactors with 100 or 50 MWe could be implemented from 2020, the potential countries could be selected from the view point of the estimated total electricity consumption in 2020 and the stability of the electrical grid system. The commercialization of small reactors should be best done early because the market for these power units as a base load operation might be reduced due to the increase of the electricity consumption in the future after 2020. The implementation program of small reactors for the district heating and electricity supply in Mongolia, which is one of the countries having the interests in small reactor, was investigated and the future implementation plan was proposed too. In order to reduce the air pollution by coal fired heating system, there is an urgent need to start the discussion for the utilization of nuclear district heating reactor in Ulaanbaatar.

Novel Radio on Fiber Access Eliminating External Electric Power Supply at Base Station

A novel Radio On Fiber(ROF) access is proposed and demonstrated which enables the pico-cell Base Station (BS) for high-speed wireless communications to eliminate external electric power supply facilities. We demonstrated 2.4-GHz band radio signal transmission through the BS without external electric power supply. The electrical power used for BS circuit is feeded by optical power over optical fiber from central station.

An optimal hydropower contract load determination method considering both human and riverine ecosystem needs

In this research, a new method is developed to determine the optimal contract load for a hydropower reservoir, which is achieved by incorporating environ- mental flows into the determination process to increase hydropower revenues, while mitigating the negative impacts ofhydropower generation on riverine ecosystems. In this method, the degree of na^ral flow regime alteration is adopted as a constraint of hydropower generation to protect riverine ecosystems, and the maximization of mean annual revenue is set as the optimization objective. The contract load in each month and the associated reservoir operating parameters were simultaneously optimized by a genetic algorithm. The proposed method was applied to China＇s Wangkuai Reservoir to test its effectiveness. The new method offers two advantages over traditional studies. First, it takes into account both the economic benefits and the ecological needs of riverine systems, rather than only the economic benefits, as in previous methods. Second, although many measures have been established to mitigate the negative ecological impacts ofhydropower generation, few have been applied to the hydropower planning stage. Thus, since the contract load is an important planning parameter for hydropower generation, influencing both economic benefits and riverine ecosystem protection, this new method could provide guidelines for the establishment of river protection measures at the hydropower planning stage.

Managing economic and social profit of cooperative models in three-echelon reverse supply chain for waste electrical and electronic equipment

In addition to maximizing economic benefits, reverse supply chains should further seek to maximize social benefits by increasing the quantity of waste electrical and electronic equipment （WEEE）. The paper investigates cooperative models with different parties in a three-echelon reverse supply chain for WEEE consisting of a single collector, a single remanufacturer, and two retailers based on complete information. In acldition, the optimal decisions of four cooperative models and the effect of the market demand of remanufactured WEEE products and the market share of two retailers on the optimal decisions are discussed. The results indicate that optimal total channel profit and recycle quantity in a reverse supply chain are maximized in a centralized model. The optimal total channel profit and recycle quantity increase with an increase in the market demand of remanufactured WEEE products. The three-echelon reverse supply chain consisting of duopolistic retailers maximizes total channel profit and recycle quantity in a reverse supply chain fbr WEEE.

Monte-Carlo simulation of effective stiffness of time-sharing optical tweezers

The Brownian motion of a polystyrene bead trapped in a time-sharing optical tweezers （TSOT） is numerically simulated by adopting Monte-Carlo technique. By analyzing the Brownian motion signal, the effective stiffness of a TSOT is acquired at different switching frequencies. Simulation results confirm that for a specific laser power and duty ratio, the effective stiffness varies with the frequency at low frequency range, while at high frequency range it keeps constant. Our results reveal that the switching frequency can be used to control the stability of time-sharing optical tweezers in a range.