Organic electro-optic polymer materials and organic-based hybrid electro-optic modulators

High performance electro-optic modulator,as the key device of integrated ultra-wideband optical systems,have be-come the focus of research.Meanwhile,the organic-based hybrid electro-optic modulators,which make full use of the advant-ages of organic electro-optic(OEO)materials(e.g.high electro-optic coefficient,fast response speed,high bandwidth,easy pro-cessing/integration and low cost)have attracted considerable attention.In this paper,we introduce a series of high-perform-ance OEO materials that exhibit good properties in electro-optic activity and thermal stability.In addition,the recent progress of organic-based hybrid electro-optic devices is reviewed,including photonic crystal-organic hybrid(PCOH),silicon-organic hy-brid(SOH)and plasmonic-organic hybrid(POH)modulators.A high-performance integrated optical platform based on OEO ma-terials is a promising solution for growing high speeds and low power consumption in compact sizes.

Waveguide electro-optic modulators based on self-assembled material systems

Fabrication and characterization of electro-optic modulators based on the novel organic electro-optic materials composed of self-assembled superlattices (SAS) were presented, both wet-dipping self-assembly and vapor phase deposition approaches were discussed. Prototype waveguide electro-optic modulators were fabricated using SAS films integrated with low-loss polymeric materials functioning as partial guiding and cladding layers.Promising electro-optic thin film materials including DTPT and PEPCOOH grown from the vapor phase were used for fabrication and test of electro-optic prototype modulators. Finally,the EO coefficient of tens of pm/V was obtained,which can sufficiently support high-speed and small size EO modulators.

Recent Progress in Silicon Electro-optic Modulators for High Speed Applications

Silicon-based high-speed electro-optical modulator is the key component of silicon photonics for future communiction and interconnection systems. In this paper, introduced are the optical mudulation mechanisms in silicon, reviewed are some recent progresses in high-speed silicon modulators, and analyzed are advantages and shortages of the silicon modulators of different types.

The effect of conductor loss on half-wave voltage and modulation bandwidth of electro-optic modulators

In this paper, we theoretically deduce the expressions of half-wave voltage and 3-dB modulation bandwidth in which conductor loss is taken into account. The results suggest that it will affect the theoretical values of half-wave voltage and bandwidth as well as the optimized electrode's dimension whether considering the conductor loss or not. As an example, we present a Mach-Zehnder (MZ) type polymer waveguide amplitude modulator. The half-wave voltage increases by 1 V and the 3-dB bandwidth decreases by 30% when the conductor loss is taken into account. Besides, the effects of impedance mismatching and velocity mismatching between microwave and light wave on the half-wave voltage, and 3-dB bandwidth are discussed.

Bend effect of the electrode for travelling wave integrated electro-optic modulators

In this paper, we have studied electrode bend effects on electrical characteristics of the modulator in the three aspects, which are arc length, characteristic impedance, and loss, applying the model in Ref. [1] and the finite element method (FEM). The results have shown that the effect only caused by the characteristic impedance is necessarily considered while its deviation is large, but others are negligible as we design a practical device. Finally, some transmission characteristics of coplanar line with different arc length of the bend have been tested, and the measured results are in good agreement with the theoretical analyses.

Ultra-high-linearity integrated lithium niobate electro-optic modulators

Integrated lithium niobate(LN)photonics is a promising platform for future chip-scale microwave photonics systems owing to its unique electro-optic properties,low optical loss,and excellent scalability.A key enabler for such systems is a highly linear electro-optic modulator that could faithfully convert analog electrical signals into optical signals.In this work,we demonstrate a monolithic integrated LN modulator with an ultra-high spurious-free dynamic range(SFDR)of 120.04 dB·Hz^(4/5)at 1 GHz,using a ring-assisted Mach–Zehnder interferometer configuration.The excellent synergy between the intrinsically linear electro-optic response of LN and an optimized linearization strategy allows us to fully suppress the cubic terms of third-order intermodulation distortions(IMD3)without active feedback controls,leading to∼20 dB improvement over previous results in the thin-film LN platform.Our ultra-high-linearity LN modulators could become a core building block for future large-scale functional microwave photonic integrated circuits by further integration with other high-performance components like low-loss delay lines,tunable filters,and phase shifters available on the LN platform.

A review of liquid crystal spatial light modulators:devices and applications

Spatial light modulators,as dynamic flat-panel optical devices,have witnessed rapid development over the past two decades,concomitant with the advancements in micro-and opto-electronic integration technology.In particular,liquid-crystal spatial light modulator(LC-SLM)technologies have been regarded as versatile tools for generating arbitrary optical fields and tailoring all degrees of freedom beyond just phase and amplitude.These devices have gained significant interest in the nascent field of structured light in space and time,facilitated by their ease of use and real-time light manipulation,fueling both fundamental research and practical applications.Here we provide an overview of the key working principles of LC-SLMs and review the significant progress made to date in their deployment for various applications,covering topics as diverse as beam shaping and steering,holography,optical trapping and tweezers,measurement,wavefront coding,optical vortex,and quantum optics.Finally,we conclude with an outlook on the potential opportunities and technical challenges in this rapidly developing field.

Unveiling the biological role of sphingosine-1-phosphate receptor modulators in inflammatory bowel diseases

Inflammatory bowel disease(IBD)is chronic inflammation of the gastrointestinal tract that has a high epidemiological prevalence worldwide.The increasing disease burden worldwide,lack of response to current biologic therapeutics,and treatment-related immunogenicity have led to major concerns regarding the clinical management of IBD patients and treatment efficacy.Understanding disease pathogenesis and disease-related molecular mechanisms is the most important goal in developing new and effective therapeutics.Sphingosine-1-phosphate(S1P)receptor(S1PR)modulators form a class of oral small molecule drugs currently in clinical development for IBD have shown promising effects on disease improvement.S1P is a sphingosine-derived phospholipid that acts by binding to its receptor S1PR and is involved in the regulation of several biological processes including cell survival,differentiation,migration,proliferation,immune response,and lymphocyte trafficking.T lymphocytes play an important role in regulating inflammatory responses.In inflamed IBD tissue,an imbalance between T helper(Th)and regulatory T lymphocytes and Th cytokine levels was found.The S1P/S1PR signaling axis and metabolism have been linked to inflammatory responses in IBD.S1P modulators targeting S1PRs and S1P metabolism have been developed and shown to regulate inflammatory responses by affecting lymphocyte trafficking,lymphocyte number,lymphocyte activity,cytokine production,and contributing to gut barrier function.

A Novel Multiple DBC-staked units Package to Parallel More Chips for SiC Power Module

Silicon carbide(SiC) power modules play an essential role in the electric vehicle drive system. To improve their performance, reduce their size, and increase production efficiency, this paper proposes a multiple staked direct bonded copper(DBC) unit based power module packaging method to parallel more chips. This method utilizes mutual inductance cancellation effect to reduce parasitic inductance. Because the conduction area in the new package is doubled, the overall area of power module can be reduced. Entire power module is divided into smaller units to enhance manufacture yield, and improve design freedom. This paper provides a detailed design, analysis and fabrication procedure for the proposed package structure. Additionally, this paper offers several feasible solutions for the connection between power terminals and DBC untis. With the structure, 18dies were paralleled for each phase-leg in a econodual size power module. Both simulation and double pulse test results demonstrate that, compared to conventional layouts, the proposed package method has 74.8% smaller parasitic inductance and 34.9% lower footprint.

Ultra-low V_(pp)and high-modulation-depth InP-based electro-optic microring modulator

A modulator is an essential building block in the integrated photonics,connecting the electrical with optical signals.The microring modulator gains much attention because of the small footprint,low drive voltage and high extinction ratio.An ultra-low V_(pp)and high-modulation-depth indium phosphide-based racetrack microring modulator is demonstrated in this paper.The proposed device mainly comprises one racetrack microring,incorporating a semiconductor amplifier,and coupling with a bus waveguide through a multimode interference coupler.Traveling wave electrodes are employed to supply bidirectional bias ports,terminating with a 50-Ω impedance.The on/off extinction ratio of the microring reaches 43.3 dB due to the delicately tuning of the gain.An 11 mV V_(pp),a maximum 42.5 dB modulation depth and a 6.6 GHz bandwidth are realized,respectively.This proposed microring modulator could enrich the functionalities and designability of the fundamental integrated devices.

Measurement of Frequency Shift Characteristics Based on LiNbO_3 Waveguide Electro-Optic Intensity Modulator

High-speed and wide-band LiNbO3 waveguide electro-optic intensity modulator has drawn great attention in the field of optical fiber communication and sensor. This paper reports the research results on the measurement of frequency shift characteristics of Mach-Zehnder electro-optic intensity modulator. Two measurement methods of frequency shift characteristics for high and low frequency modulations are studied in theory and experiment and demonstrate different results. The realization of a multi-wavelength optical source based on Mach-Zehnder electro-optic intensity modulator has been introduced. The technique to reach the maximum intensity for interesting shift frequency, particularly for heterodyne detection of Brillouin distributed optical fiber sensing, has been given.

Low-power electro-optic phase modulator based on multilayer graphene/silicon nitride waveguide

Electro-optic modulator is a key component for on-chip optical signal processing.An electro-optic phase modulator based on multilayer graphene embedded in silicon nitride waveguide is demonstrated to fulfill low-power operation.Finite element method is adopted to investigate the interaction enhancement between the graphene flake and the optical mode.The impact of multilayer graphene on the performance of phase modulator is studied comprehensively.Simulation results show that the modulation efficiency improves with the increment of graphene layer number,as well as the modulation length.The 3-dB bandwidth of around 48 GHz is independent of graphene layer number and length.Compared to modulator with two-or four-layer graphene,the six-layer graphene/silicon nitride waveguide modulator can realizeπphase shift at a low-power consumption of 14 fJ/bit when the modulation length is 240μm.

Polymer Electro-optic Modulator Linear Bias Using the Thermo-optic Effect

A quasi-rectangular waveguide polymer MacH^(-)Zehnder (M-Z) electro-optic (EO) modulator based on an organic/inorganic hybrid material with thermal bias control is fabricated and demonstrated.Linear bias for the modulator is obtained through thermo-optic effect.The optical output is adjusted by changing phase difference between the two arms of the M-Z interferometer.A power consumption of 16.1 m W for π phase change is observed owing to the application of silica cladding.This approach is proved to be effective to suppress direct current drift in polymer EO modulators.

Waveguide-integrated optical modulators with two-dimensional materials

Waveguide-integrated optical modulators are indispensable for on-chip optical interconnects and optical computing.To cope with the ever-increasing amount of data being generated and consumed,ultrafast waveguide-integrated optical modulators with low energy consumption are highly demanded.In recent years,two-dimensional(2D)materials have attracted a lot of attention and have provided tremendous opportunities for the development of high-performance waveguide-integrated optical modulators because of their extraordinary optoelectronic properties and versatile compatibility.This paper reviews the state-of-the-art waveguide-integrated optical modulators with 2D materials,providing researchers with the developing trends in the field and allowing them to identify existing challenges and promising potential solutions.First,the concept and fundamental mechanisms of optical modulation with 2D materials are summarized.Second,a review of waveguide-integrated optical modulators employing electro-optic,all-optic,and thermo-optic effects is provided.Finally,the challenges and perspectives of waveguide-integrated modulators with 2D materials are discussed.

Electro-optical dual modulation on resistive switching behavior in BaTiO3/BiFeO3/TiO2 heterojunction

The novel BaTiO3/BiFeO3/TiO2 multilayer heterojunction is prepared on a fluorine-doped tinoxide(FTO) substrate by the sol–gel method. The results indicate that the Pt/Ba TiO3/BiFeO3/TiO2/FTO heterojunction exhibits stable bipolar resistive switching characteristic, good retention performance, and reversal characteristic. Under different pulse voltages and light fields, four stable resistance states can also be realized. The analysis shows that the main conduction mechanism of the resistive switching characteristic of the heterojunction is space charge limited current(SCLC) effect. After the comprehensive analysis of the band diagram and the P–E ferroelectric property of the multilayer heterojunction, we can deduce that the SCLC is formed by the effect of the oxygen vacancy which is controlled by ferroelectric polarizationmodulated change of interfacial barrier. And the effective photo-generated carrier also plays a regulatory role in resistance state(RS), which is formed by the double ferroelectric layer Ba TiO3/BiFeO3 under different light fields. This research is of potential application values for developing the multi-state non-volatile resistance random access memory(RRAM) devices based on ferroelectric materials.

Magneto and Electro-Optic Intensity Modulator Based on Liquid Crystal and Magnetic Fluid Filled Photonic Crystal Fiber

We propose a novel light intensity modulator based on magnetic fluid and liquid crystal（LC） filled photonic crystal fibers（PCFs）. The influences of electric and magnetic fields on the transmission intensity are theoretically and experimentally analyzed and investigated. Both the electric and magnetic fields can manipulate the molecular arrangement of LC to array a certain angle without changing the refractive index of the LC. Therefore, light loss in the PCF varies with the electric and magnetic fields whereas the peak wavelengths remain constant. The experimental results show that the transmission intensity decreases with the increase of the electric and magnetic fields. The cut-off electric field is 0.899 V/um at 20 Hz and the cut-off magnetic field is 195 m T. This simple and compacted optical modulator will have a great prospect in sensing applications.

Analysis of electro-optical intensity modulator for bunch arrival-time monitor at SXFEL

A bunch arrival-time monitor(BAM) based on an electro-optical intensity modulation scheme is currently under development at Shanghai Soft X-ray Free-Electron Laser to meet the high-resolution requirements for bunch stability. The BAM uses a radio frequency signal generated by a pickup cavity to modulate the reference laser pulses in an electro-optical intensity modulator(EOM), and the bunch arrival-time information is derived from the amplitude change of the laser pulse after laser pulse modulation.EOM is a key optical component in the BAM system.Through the basic principle analysis of BAM, many parameters of the EOM are observed to affect the measurement resolution of the BAM system. Therefore, a systematic analysis of the EOM is crucial. In this paper, we present two schemes to compare and analyze an EOM and provide a reference for selecting a new version of the EOM.

Influence of substrate effect on near-field radiative modulator based on biaxial hyperbolic materials

Relative rotation between the emitter and receiver could effectively modulate the near-field radiative heat transfer(NFRHT)in anisotropic media.Due to the strong in-plane anisotropy,natural hyperbolic materials can be used to construct near-field radiative modulators with excellent modulation effects.However,in practical applications,natural hyperbolic materials need to be deposited on the substrate,and the influence of substrate on modulation effect has not been studied yet.In this work,we investigate the influence of substrate effect on near-field radiative modulator based onα-MoO_(3).The results show that compared to the situation without a substrate,the presence of both lossless and lossy substrate will reduce the modulation contrast(MC)for different film thicknesses.When the real or imaginary component of the substrate permittivity increases,the mismatch of hyperbolic phonon polaritons(HPPs)weakens,resulting in a reduction in MC.By reducing the real and imaginary components of substrate permittivity,the MC can be significantly improved,reaching 4.64 forε_(s)=3 at t=10 nm.This work indicates that choosing a substrate with a smaller permittivity helps to achieve a better modulation effect,and provides guidance for the application of natural hyperbolic materials in the near-field radiative modulator.

Hypertrophic Scar Formation and Wound Healing Modulation Fatty Acids as Modulators of Severe Scars

Scar tissue usually generates severe discomfort in the short and long term. Common symptoms include anesthetics sequelae, pruritus, joint malfunction, new wounds on the scar surface, and pain. There are several treatments for scars, like compression, topical or intralesional steroid infiltration, 5-fluorouracil, dermabrasion, and surgeries with new scar tissue. For adult patients, it is easier to choose the treatment. However, compression is commonly applied in children to prevent treatments that have adverse effects. This study reports the outcomes of 15 patients submitted to abdominoplasty, traumatic wounds and post-burn scar treatments, which showed significant changes after the continuous use of an ointment composed of petrolatum, cod liver oil, BHT, Chamomilla recutita (chamomile) oil, Helianthus annuus (sunflower) oil, and Prunus amygdalus dulcis (sweet almond) oil. As components of the stratum corneum, unsaturated fatty acids influence the cutaneous structural and immune status and permeability. They also interfere with the maturation and differentiation of the stratum corneum and inhibit the production of proinflammatory eicosanoids, reactive species (ROS and RNS), and cytokines, thereby influencing the inflammatory response and possibly wound healing. This article aims to share our experience with the regular use of an ointment in adult and pediatric patients for three months. The increase in proinflammatory cytokine production at wound sites, resulting in a noninvasive, therapeutical, and effective cutaneous wound healing and scarring modulation, may provide a physiopathological explanation for the fast improvement of scars.

Design of Protograph LDPC-Coded MIMO-VLC Systems with Generalized Spatial Modulation

This paper investigates the bit-interleaved coded generalized spatial modulation(BICGSM) with iterative decoding(BICGSM-ID) for multiple-input multiple-output(MIMO) visible light communications(VLC). In the BICGSM-ID scheme, the information bits conveyed by the signal-domain(SiD) symbols and the spatial-domain(SpD) light emitting diode(LED)-index patterns are coded by a protograph low-density parity-check(P-LDPC) code. Specifically, we propose a signal-domain symbol expanding and re-allocating(SSER) method for constructing a type of novel generalized spatial modulation(GSM) constellations, referred to as SSERGSM constellations, so as to boost the performance of the BICGSM-ID MIMO-VLC systems.Moreover, by applying a modified PEXIT(MPEXIT) algorithm, we further design a family of rate-compatible P-LDPC codes, referred to as enhanced accumulate-repeat-accumulate(EARA) codes,which possess both excellent decoding thresholds and linear-minimum-distance-growth property. Both analysis and simulation results illustrate that the proposed SSERGSM constellations and P-LDPC codes can remarkably improve the convergence and decoding performance of MIMO-VLC systems. Therefore, the proposed P-LDPC-coded SSERGSM-mapped BICGSMID configuration is envisioned as a promising transmission solution to satisfy the high-throughput requirement of MIMO-VLC applications.