A fully coherent free electron laser(FEL) seeded with a higher-order harmonic(HH) pulse from high-order harmonic generation(HHG) is successfully operated for a sufficiently prolonged time in pilot user experiments by ...A fully coherent free electron laser(FEL) seeded with a higher-order harmonic(HH) pulse from high-order harmonic generation(HHG) is successfully operated for a sufficiently prolonged time in pilot user experiments by using a timing drift feedback. For HHG-seeded FELs, the seeding laser pulses have to be synchronized with electron bunches. Despite seeded FELs being non-chaotic light sources in principle, external laser-seeded FELs are often unstable in practice because of a timing jitter and a drift between the seeding laser pulses and the accelerated electron bunches. Accordingly,we constructed a relative arrival-timing monitor based on non-invasive electro-optic sampling(EOS). The EOS monitor made uninterrupted shot-to-shot monitoring possible even during the seeded FEL operation. The EOS system was then used for arrival-timing feedback with an adjustability of 100 fs for continual operation of the HHG-seeded FEL. Using the EOS-based beam drift controlling system, the HHG-seeded FEL was operated over half a day with an effective hit rate of 20%–30%. The output pulse energy was 20 μJ at the 61.2 nm wavelength. Towards seeded FELs in the water window region, we investigated our upgrade plan to seed high-power FELs with HH photon energy of 30–100 e V and lase at shorter wavelengths of up to 2 nm through high-gain harmonic generation(HGHG) at the energy-upgraded SPring-8Compact SASE Source(SCSS) accelerator. We studied a benefit as well as the feasibility of the next HHG-seeded FEL machine with single-stage HGHG with tunability of a lasing wavelength.展开更多
The Electro-optical sampling delay scanning technique can be used for electron beam bunch length measurement. A novel non-synchronous delay scanning technique based on the electro-optical sampling measurements is pres...The Electro-optical sampling delay scanning technique can be used for electron beam bunch length measurement. A novel non-synchronous delay scanning technique based on the electro-optical sampling measurements is presented. Based on Beijing Free Electron Laser （BFEL）, the electron beam bunch length was measured with the electro-optical sampling technique for the first time in China. The result shows that the electron beam bunch length at BFEL is about 5.6±1.2 ps.展开更多
Transparent electro-optic(EO)ceramics of La-doped 0.75Pb(Mg_(1/3)Nb_(2/3))O_(3)-0.25PbTiO_(3)(0.75PMN-0.25PT)were prepared successfully.High transparency of 69%in the near-infrared(IR)wavelength(1550 nm)was achieved a...Transparent electro-optic(EO)ceramics of La-doped 0.75Pb(Mg_(1/3)Nb_(2/3))O_(3)-0.25PbTiO_(3)(0.75PMN-0.25PT)were prepared successfully.High transparency of 69%in the near-infrared(IR)wavelength(1550 nm)was achieved at 2 mo1%La doping,meanwhile it shows an extremely high quadratic EO coeficient of 45.4×10^(-16)m^(2)·V^(-2),which s indispensable for applications in EO devices.The distribution of a polar nanodomain structure of the samples experiences disorder-order-disorder evolution in a La doping range.It is found that a parallelly-stacked polar nanodomain structure with an easier and faster polarization switching in the 2 mol%La-doped sample suggests that an ordering distribution of polar nanoregions would be critical to inducing large EO effect,transparency,and piezoelectric response.A triple-cavity tunable optical filter(TOF)with a single transmission peak and a tuning voltage below 30 V in a tuning range of 190-197 THz was designed based on our ceramics.The work is believed to bridge the relationship among doping-engineering,EO properties,and polarization behavior,which would guide the further optimization of transparent EO ceramics.展开更多
Ultrafast optoelectronic technology has been widely used in terahertz time domain spectrum,terahertz imaging technology,terahertz communication and so on,and great progress has been achieved in the past two decade.Rec...Ultrafast optoelectronic technology has been widely used in terahertz time domain spectrum,terahertz imaging technology,terahertz communication and so on,and great progress has been achieved in the past two decade.Recently,this innovative technology has been applied in radio metrology and supplied a potential and hopeful method to solve the existent challenges of calibration devices and equipments with bandwidth up to 100 GHz.This paper generally summarizes the emerging applications of the ultrafast optoelectronic technology in radio metrology.The main applications of this technology in calibrating broadband sampling oscilloscopes,the high-speed photodiodes and calibrating the electrical pulse generators are emphasized,and the testing of monolithic microwave integrated circuits is also presented.展开更多
We theoretically investigate terahertz(THz)emission and detection from h110i-oriented electro-optic(EO) crystals adapted for Yb-doped femtosecond pulse laser.According to the principles of phase-matching condition, th...We theoretically investigate terahertz(THz)emission and detection from h110i-oriented electro-optic(EO) crystals adapted for Yb-doped femtosecond pulse laser.According to the principles of phase-matching condition, the dispersion relation between optical velocity and THz pulse,THz absorption spectra, and coherence lengths of CdTe, GaP,and GaAs crystals below the phonon resonant frequency are calculated correspondingly. The optical rectification and EO sampling process of above crystals with the same thickness of0.1 mm are simulated. As a consequence, we found that the optimal emission frequency of CdTe is at 2.65 THz, however,it reaches 6.56 THz of GaAs and 4.77 THz of GaP. With the help of frequency response function, the calculated cut-off frequency of CdTe is only 3.45 THz, while GaAs and GaP achieve 7.15 and 6.37 THz correspondingly. Finally, the EO sampling sensitivity of GaAs is higher than CdTe and GaP when the crystal's thickness exceeds 1.58 mm. The strong THz absorption of CdTe saturates distinctly the EO sampling sensitivity with its thickness increasing.展开更多
The interaction of ultra-intense high-power lasers with solid-state targets has been largely studied for the past 20 years as a future compact proton and ion source.Indeed,the huge potential established on the target ...The interaction of ultra-intense high-power lasers with solid-state targets has been largely studied for the past 20 years as a future compact proton and ion source.Indeed,the huge potential established on the target surface by the escaping electrons provides accelerating gradients of TV/m.This process,called target normal sheath acceleration,involves a large number of phenomena and is very difficult to study because of the picosecond scale dynamics.At the SPARC LAB Test Facility,the high-power laser FLAME is employed in experiments with solid targets,aiming to study possible correlations between ballistic fast electrons and accelerated protons.In detail,we have installed in the interaction chamber two different diagnostics,each one devoted to characterizing one beam.The first relies on electro-optic sampling,and it has been adopted to completely characterize the ultrafast electron components.On the other hand,a time-of-flight detector,based on chemical-vapour-deposited diamond,has allowed us to retrieve the proton energy spectrum.In this work,we report preliminary studies about simultaneous temporal resolved measurements of both the first forerunner escaping electrons and the accelerated protons for different laser parameters.展开更多
文摘A fully coherent free electron laser(FEL) seeded with a higher-order harmonic(HH) pulse from high-order harmonic generation(HHG) is successfully operated for a sufficiently prolonged time in pilot user experiments by using a timing drift feedback. For HHG-seeded FELs, the seeding laser pulses have to be synchronized with electron bunches. Despite seeded FELs being non-chaotic light sources in principle, external laser-seeded FELs are often unstable in practice because of a timing jitter and a drift between the seeding laser pulses and the accelerated electron bunches. Accordingly,we constructed a relative arrival-timing monitor based on non-invasive electro-optic sampling(EOS). The EOS monitor made uninterrupted shot-to-shot monitoring possible even during the seeded FEL operation. The EOS system was then used for arrival-timing feedback with an adjustability of 100 fs for continual operation of the HHG-seeded FEL. Using the EOS-based beam drift controlling system, the HHG-seeded FEL was operated over half a day with an effective hit rate of 20%–30%. The output pulse energy was 20 μJ at the 61.2 nm wavelength. Towards seeded FELs in the water window region, we investigated our upgrade plan to seed high-power FELs with HH photon energy of 30–100 e V and lase at shorter wavelengths of up to 2 nm through high-gain harmonic generation(HGHG) at the energy-upgraded SPring-8Compact SASE Source(SCSS) accelerator. We studied a benefit as well as the feasibility of the next HHG-seeded FEL machine with single-stage HGHG with tunability of a lasing wavelength.
基金Supported by National Natural Science Foundation of China (10575116)
文摘The Electro-optical sampling delay scanning technique can be used for electron beam bunch length measurement. A novel non-synchronous delay scanning technique based on the electro-optical sampling measurements is presented. Based on Beijing Free Electron Laser （BFEL）, the electron beam bunch length was measured with the electro-optical sampling technique for the first time in China. The result shows that the electron beam bunch length at BFEL is about 5.6±1.2 ps.
基金supported by the National Natural Science Foundation of China(Grant No.61971459)the Fund from Science,Technology and Innovation Commission of Shenzhen Municipality(Grant No.JCYJ2019080909-5009521)+2 种基金the Innovation Team Program of Hubei Province,China(Grant No.2019CFA004)the Innovation Fund of Wuhan National Laboratory for Optoelectronics&Optical Valley Laboratory(WNLO)2022 Shenzhen Central Leading Local Science and Technology Development Special Funding Program Virtual University Park Laboratory Project.
文摘Transparent electro-optic(EO)ceramics of La-doped 0.75Pb(Mg_(1/3)Nb_(2/3))O_(3)-0.25PbTiO_(3)(0.75PMN-0.25PT)were prepared successfully.High transparency of 69%in the near-infrared(IR)wavelength(1550 nm)was achieved at 2 mo1%La doping,meanwhile it shows an extremely high quadratic EO coeficient of 45.4×10^(-16)m^(2)·V^(-2),which s indispensable for applications in EO devices.The distribution of a polar nanodomain structure of the samples experiences disorder-order-disorder evolution in a La doping range.It is found that a parallelly-stacked polar nanodomain structure with an easier and faster polarization switching in the 2 mol%La-doped sample suggests that an ordering distribution of polar nanoregions would be critical to inducing large EO effect,transparency,and piezoelectric response.A triple-cavity tunable optical filter(TOF)with a single transmission peak and a tuning voltage below 30 V in a tuning range of 190-197 THz was designed based on our ceramics.The work is believed to bridge the relationship among doping-engineering,EO properties,and polarization behavior,which would guide the further optimization of transparent EO ceramics.
文摘Ultrafast optoelectronic technology has been widely used in terahertz time domain spectrum,terahertz imaging technology,terahertz communication and so on,and great progress has been achieved in the past two decade.Recently,this innovative technology has been applied in radio metrology and supplied a potential and hopeful method to solve the existent challenges of calibration devices and equipments with bandwidth up to 100 GHz.This paper generally summarizes the emerging applications of the ultrafast optoelectronic technology in radio metrology.The main applications of this technology in calibrating broadband sampling oscilloscopes,the high-speed photodiodes and calibrating the electrical pulse generators are emphasized,and the testing of monolithic microwave integrated circuits is also presented.
基金supported by the National Natural Science Foundation of China(61307130)National Basic Research Program of China(2012CB326402)+2 种基金Innovation Program of Shanghai Municipal Education Commission(14YZ077)Innovation Group(DXL121)Starting Funding from Shanghai Normal University(A-3501-13-002006)
文摘We theoretically investigate terahertz(THz)emission and detection from h110i-oriented electro-optic(EO) crystals adapted for Yb-doped femtosecond pulse laser.According to the principles of phase-matching condition, the dispersion relation between optical velocity and THz pulse,THz absorption spectra, and coherence lengths of CdTe, GaP,and GaAs crystals below the phonon resonant frequency are calculated correspondingly. The optical rectification and EO sampling process of above crystals with the same thickness of0.1 mm are simulated. As a consequence, we found that the optimal emission frequency of CdTe is at 2.65 THz, however,it reaches 6.56 THz of GaAs and 4.77 THz of GaP. With the help of frequency response function, the calculated cut-off frequency of CdTe is only 3.45 THz, while GaAs and GaP achieve 7.15 and 6.37 THz correspondingly. Finally, the EO sampling sensitivity of GaAs is higher than CdTe and GaP when the crystal's thickness exceeds 1.58 mm. The strong THz absorption of CdTe saturates distinctly the EO sampling sensitivity with its thickness increasing.
文摘The interaction of ultra-intense high-power lasers with solid-state targets has been largely studied for the past 20 years as a future compact proton and ion source.Indeed,the huge potential established on the target surface by the escaping electrons provides accelerating gradients of TV/m.This process,called target normal sheath acceleration,involves a large number of phenomena and is very difficult to study because of the picosecond scale dynamics.At the SPARC LAB Test Facility,the high-power laser FLAME is employed in experiments with solid targets,aiming to study possible correlations between ballistic fast electrons and accelerated protons.In detail,we have installed in the interaction chamber two different diagnostics,each one devoted to characterizing one beam.The first relies on electro-optic sampling,and it has been adopted to completely characterize the ultrafast electron components.On the other hand,a time-of-flight detector,based on chemical-vapour-deposited diamond,has allowed us to retrieve the proton energy spectrum.In this work,we report preliminary studies about simultaneous temporal resolved measurements of both the first forerunner escaping electrons and the accelerated protons for different laser parameters.
