A carbon fiber mat is a sheet composed of intercrossing short carbon fibers,which has more stable and lower electrical resistivity compared with dispersed short carbon fiber mixed in cement.Thereby carbon fiber mat ce...A carbon fiber mat is a sheet composed of intercrossing short carbon fibers,which has more stable and lower electrical resistivity compared with dispersed short carbon fiber mixed in cement.Thereby carbon fiber mat cement could exhibit obvious electro-thermal effect.When electrified,the temperature of composite structures made up of cement mortar and carbon fiber mat will rise rapidly.If the temperature field is not uniform,temperature difference will cause structures to deform,which can be used to adjust the deformation of structures.The temperature field and deformation response driven by the electro-thermal effects of a type of carbon fiber mat cement beams are studied.Firstly,the temperature and deformation responses are studied using theories of thermal conduction and elasticity.Secondly,experimental results are given to verify the theoretical solution.These two parts lay the foundation for temperature and deformation adjustment.展开更多
A type of crank beam electro-thermal micro actuator was prescribed. Mechanical model of the actuator was established, and the static characteristic was analyzed.Comparing the theoretical analysis with experimental dat...A type of crank beam electro-thermal micro actuator was prescribed. Mechanical model of the actuator was established, and the static characteristic was analyzed.Comparing the theoretical analysis with experimental data, it is found that the thermodynamic character of material in micro actuator has a different variable regularity contrasted to that used in macro scale machines. It is the micro scale effect that results in the deviation between the simulating result and experimental results. The thermodynamic expression of polysilicon, which was fitted by means of the experimental data concerned, was used to modify the mechanical model. The modified model, in which the micro scale thermodynamic characteristic was considered, was more reasonable and could make the optimal design and control strategies analyzing the straight-line micro actuator more feasible.展开更多
Electro-thermal explosion directional spraying was used to prepare the stellite coating on substrate of the AISI 1045 steel. The morphologies of cross-section and worn scar, porosity, distribution of elements, micro- ...Electro-thermal explosion directional spraying was used to prepare the stellite coating on substrate of the AISI 1045 steel. The morphologies of cross-section and worn scar, porosity, distribution of elements, micro- hardness and wear resistance of the coating were determined by means of SEM, EDAX, micro-hardness tester and sliding wear tester. Because of the compact construction, good bonding and high hardness, the coating is characterized by good wear resistance. The results show that the mainly failure mode of the stellite coating is micro- plowing.展开更多
In the present paper,444 patients with vulvar leukoplasia were treated by selectingacupoints in the local area and along the meridian plus Qugu（CV 2）and Huiyin（CV 1）and usingelectro-thermal needling.The total effe...In the present paper,444 patients with vulvar leukoplasia were treated by selectingacupoints in the local area and along the meridian plus Qugu（CV 2）and Huiyin（CV 1）and usingelectro-thermal needling.The total effective rate was up to 100.0％and the cure rate 87.3％.Theelectro-thermal effect directly acted on the affected area but strengthened the immunologic function ofthe whole body and raised the content of serum copper.展开更多
98 patients with sciatica are treated.by stimubting acupoints using a self-made electro-thermal moxibustion instrument.Results show that 82 cases arecured,8 improved and 5 effective,with the total effective rate of 9...98 patients with sciatica are treated.by stimubting acupoints using a self-made electro-thermal moxibustion instrument.Results show that 82 cases arecured,8 improved and 5 effective,with the total effective rate of 96.9％.The temperature relesed from this instrument is adjustable.The electro-thermal moxibustion therapy is short in treatment duration and rapid in taking effect.Ithas no needling-induced pain and no side-effects,and is accepted preferably by patients.展开更多
As a new spraying technology used in the remanufacturing engineering, electro-thermal explosion spraying holds a lot of advantages. Electro-thermal explosion spraying coating aliquation phenomena are reduced and non-c...As a new spraying technology used in the remanufacturing engineering, electro-thermal explosion spraying holds a lot of advantages. Electro-thermal explosion spraying coating aliquation phenomena are reduced and non-crystal, micro-crystal and millimicron-crystal and other microstructure are formed. The corrosion-resistance ability of electro-thermal explosion spraying coating in high temperature environment was surveyed respectively. SEM equipped with EDS was employed to analyze the microstructure of spraying coating before and after corrosion. The corrosion-resistance mechanism of the spraying coating was discussed.展开更多
With surface- and bulk-micromachining, an 8 × 8 mirrors array is designed, fabricated and tested, which is based on electro-thermal actuators and can be addressed individually. The micromirror is square shaped, 4...With surface- and bulk-micromachining, an 8 × 8 mirrors array is designed, fabricated and tested, which is based on electro-thermal actuators and can be addressed individually. The micromirror is square shaped, 4-corner-actuated. Its dimension is 200 μm × 200 μm. The substrate below it is caved away to ensure a tilt at an angle as large as possible. To protect the etch-sensitive features on the front side of the wafer undamaged during wet deep silicon etch on the backside, the wax protective coating process is used. Mirror actuated by powering an alternative pair of heaters will tilt in 2-DOF. If its 4 cantilevers/heaters are powered synchronously, it will move in a piston mode. The effective arrays are more than 80% out of the three finished wafers. When the ramp voltage frequency applied to a pair of neighboring cantilevers is 5 Hz at 10 V, the average tilting angle can be ± 8°.展开更多
Carbon fiber-reinforced silicon carbonitride ceramic matrix composites （C/SiCN） were prepared by rapid electro-thermal pyrolysis CVD using liquid polymer hexamethyldisilazane （HMDS, （CH3）3SiNHSi（CH3）3） as prec...Carbon fiber-reinforced silicon carbonitride ceramic matrix composites （C/SiCN） were prepared by rapid electro-thermal pyrolysis CVD using liquid polymer hexamethyldisilazane （HMDS, （CH3）3SiNHSi（CH3）3） as precursor. Microstructure morphology and production technique of C/SiCN composites were investigated. Scanning electron microscopy and transmission electron microscopy were respectively employed to characterize microstructures of the as-received C/SiCN composites samples. The high temperature pyrolysis of HMDS results in destruction of molecular chain, fracture of bonds, as well as liquid-gas-solid conversion from polymer to ceramic. Microstructures observation indicates that there is a high degree of coalescence between SiCN matrix and C fiber. The deposition model of liquid precursor electro-thermal pyrolysis CVD is different from that of gas precursor isothermal chemical vapor infiltration. Rapid liquid flow and slow gas diffusion are key factors for the difference of two methods. Preparation of rapid electro-thermal pyrolysis CVD consists of four steps including liquid polymer infiltration, polymer pyrolysis, rapid deposition of pyrolyzed substances and rapid densification, respectively.展开更多
The fuzzy numerical value analysis method is adopted for the first time, which solves the problem of nanometer electro-thermal in filming process, The key technique is embodied by controlling the time distribution, te...The fuzzy numerical value analysis method is adopted for the first time, which solves the problem of nanometer electro-thermal in filming process, The key technique is embodied by controlling the time distribution, temperature and press in the filming process. The concrete technique of filming is showed by establishing the fuzzy mumbership function of above three indexes, which improves the precision of the materials of nanometer electro-thermal in hot-working. At the same time, the principles of the fuzzy relationship mapping inversion （FRMI） is put forward, Therefore, the standardization and continuity can be met.展开更多
A static security assessment approach considering electro-thermal coupling of transmission lines is proposed in this paper. Combined with the dynamic thermal rating technology and energy forecasting, the approach can ...A static security assessment approach considering electro-thermal coupling of transmission lines is proposed in this paper. Combined with the dynamic thermal rating technology and energy forecasting, the approach can track both the electrical variables and transmission lines’ temperature varying trajectory under anticipated contingencies. Accordingly, it identifies the serious contingencies by transmission lines’ temperature violation rather than its power flow, in this case the time margin of temperature rising under each serious contingency can be provided to operators as warning information and some unnecessary security control can also be avoided. Finally, numerical simulations are carried out to testify the validity of the proposed approach.展开更多
In recent years, Combined electro-thermal system has developed rapidly. In order to provide the initial data for the analysis of the combined electro-thermal system, a practical energy flow calculation method for the ...In recent years, Combined electro-thermal system has developed rapidly. In order to provide the initial data for the analysis of the combined electro-thermal system, a practical energy flow calculation method for the combined electro-thermal system is proposed in this paper. Based on the detailed analysis of the topology structure of the heating network and its hydraulic and thermodynamic model, the forward-backward sweep method for the heat flow of the heating network is established, which is more suitable for the actual radial heating network. The electric and thermal coupling model for heating source, such as thermoelectric unit and electric boiler is established, and the heat flow of heating network and the power flow of power grid are calculated orderly, thus a fast calculation method for the combined electro-thermal system is formed. What’s more, a combined electro-thermal system with two-stage peak-shaving electric boiler is used as the example system. This paper validates the effectiveness and rapidity of this method through the example system, and analyzes the influence for the energy flow of combined electro-thermal system caused by the operating parameters such as the installation location of electric boiler, the outlet water temperature of heat source and the outlet flow rate, etc.展开更多
A polycrystalline dense Ti3SiC2 based ceramic material has been produced by several techniques. The effect of addition of TiC and SiC is also studied. The Ti3SiC2 material shows extraordinary electrical, thermal and m...A polycrystalline dense Ti3SiC2 based ceramic material has been produced by several techniques. The effect of addition of TiC and SiC is also studied. The Ti3SiC2 material shows extraordinary electrical, thermal and mechanical properties. Furthermore, it shows a damage tolerance capability and oxidation resistance. In this work, we have synthesized Ti3SiC2 by electro-thermal explosion chemical reaction (ETE) with high current density (900 Amperes/a.u) followed by uniaxial pressure. The structural properties of the as-prepared materials are studied by x-ray diffraction (XRD), scanning electron microscope (SEM) and energy dispersive x-ray spectroscopy (EDX) techniques. The chemical cartography, imaging and electronic properties are investigated using Ultra-STEM and electron high energy loss resolution spectroscopy (EELS) techniques, respectively. The surface of Ti3SiC2 is characterized by means of X-ray photoelectron spectroscopy (XPS). High resolution C 1s, Si 2p, Ti 2p, Ti 3s core level spectra are explained in terms of crystallographic and electronic structure. Valence band spectrum is performed to confirm the validity of the theoretical calculations.展开更多
基金Project supported by National Natural Science Foundation of China(No.50238040).
文摘A carbon fiber mat is a sheet composed of intercrossing short carbon fibers,which has more stable and lower electrical resistivity compared with dispersed short carbon fiber mixed in cement.Thereby carbon fiber mat cement could exhibit obvious electro-thermal effect.When electrified,the temperature of composite structures made up of cement mortar and carbon fiber mat will rise rapidly.If the temperature field is not uniform,temperature difference will cause structures to deform,which can be used to adjust the deformation of structures.The temperature field and deformation response driven by the electro-thermal effects of a type of carbon fiber mat cement beams are studied.Firstly,the temperature and deformation responses are studied using theories of thermal conduction and elasticity.Secondly,experimental results are given to verify the theoretical solution.These two parts lay the foundation for temperature and deformation adjustment.
文摘A type of crank beam electro-thermal micro actuator was prescribed. Mechanical model of the actuator was established, and the static characteristic was analyzed.Comparing the theoretical analysis with experimental data, it is found that the thermodynamic character of material in micro actuator has a different variable regularity contrasted to that used in macro scale machines. It is the micro scale effect that results in the deviation between the simulating result and experimental results. The thermodynamic expression of polysilicon, which was fitted by means of the experimental data concerned, was used to modify the mechanical model. The modified model, in which the micro scale thermodynamic characteristic was considered, was more reasonable and could make the optimal design and control strategies analyzing the straight-line micro actuator more feasible.
文摘Electro-thermal explosion directional spraying was used to prepare the stellite coating on substrate of the AISI 1045 steel. The morphologies of cross-section and worn scar, porosity, distribution of elements, micro- hardness and wear resistance of the coating were determined by means of SEM, EDAX, micro-hardness tester and sliding wear tester. Because of the compact construction, good bonding and high hardness, the coating is characterized by good wear resistance. The results show that the mainly failure mode of the stellite coating is micro- plowing.
文摘In the present paper,444 patients with vulvar leukoplasia were treated by selectingacupoints in the local area and along the meridian plus Qugu（CV 2）and Huiyin（CV 1）and usingelectro-thermal needling.The total effective rate was up to 100.0％and the cure rate 87.3％.Theelectro-thermal effect directly acted on the affected area but strengthened the immunologic function ofthe whole body and raised the content of serum copper.
文摘98 patients with sciatica are treated.by stimubting acupoints using a self-made electro-thermal moxibustion instrument.Results show that 82 cases arecured,8 improved and 5 effective,with the total effective rate of 96.9％.The temperature relesed from this instrument is adjustable.The electro-thermal moxibustion therapy is short in treatment duration and rapid in taking effect.Ithas no needling-induced pain and no side-effects,and is accepted preferably by patients.
文摘As a new spraying technology used in the remanufacturing engineering, electro-thermal explosion spraying holds a lot of advantages. Electro-thermal explosion spraying coating aliquation phenomena are reduced and non-crystal, micro-crystal and millimicron-crystal and other microstructure are formed. The corrosion-resistance ability of electro-thermal explosion spraying coating in high temperature environment was surveyed respectively. SEM equipped with EDS was employed to analyze the microstructure of spraying coating before and after corrosion. The corrosion-resistance mechanism of the spraying coating was discussed.
文摘With surface- and bulk-micromachining, an 8 × 8 mirrors array is designed, fabricated and tested, which is based on electro-thermal actuators and can be addressed individually. The micromirror is square shaped, 4-corner-actuated. Its dimension is 200 μm × 200 μm. The substrate below it is caved away to ensure a tilt at an angle as large as possible. To protect the etch-sensitive features on the front side of the wafer undamaged during wet deep silicon etch on the backside, the wax protective coating process is used. Mirror actuated by powering an alternative pair of heaters will tilt in 2-DOF. If its 4 cantilevers/heaters are powered synchronously, it will move in a piston mode. The effective arrays are more than 80% out of the three finished wafers. When the ramp voltage frequency applied to a pair of neighboring cantilevers is 5 Hz at 10 V, the average tilting angle can be ± 8°.
基金Funded by the National Natural Science Foundation of China(No.50772089)the Program of Introducing Talents of Discipline in the Project of Advanced Materials and their Forming Technology(B08040)
文摘Carbon fiber-reinforced silicon carbonitride ceramic matrix composites （C/SiCN） were prepared by rapid electro-thermal pyrolysis CVD using liquid polymer hexamethyldisilazane （HMDS, （CH3）3SiNHSi（CH3）3） as precursor. Microstructure morphology and production technique of C/SiCN composites were investigated. Scanning electron microscopy and transmission electron microscopy were respectively employed to characterize microstructures of the as-received C/SiCN composites samples. The high temperature pyrolysis of HMDS results in destruction of molecular chain, fracture of bonds, as well as liquid-gas-solid conversion from polymer to ceramic. Microstructures observation indicates that there is a high degree of coalescence between SiCN matrix and C fiber. The deposition model of liquid precursor electro-thermal pyrolysis CVD is different from that of gas precursor isothermal chemical vapor infiltration. Rapid liquid flow and slow gas diffusion are key factors for the difference of two methods. Preparation of rapid electro-thermal pyrolysis CVD consists of four steps including liquid polymer infiltration, polymer pyrolysis, rapid deposition of pyrolyzed substances and rapid densification, respectively.
文摘The fuzzy numerical value analysis method is adopted for the first time, which solves the problem of nanometer electro-thermal in filming process, The key technique is embodied by controlling the time distribution, temperature and press in the filming process. The concrete technique of filming is showed by establishing the fuzzy mumbership function of above three indexes, which improves the precision of the materials of nanometer electro-thermal in hot-working. At the same time, the principles of the fuzzy relationship mapping inversion （FRMI） is put forward, Therefore, the standardization and continuity can be met.
文摘A static security assessment approach considering electro-thermal coupling of transmission lines is proposed in this paper. Combined with the dynamic thermal rating technology and energy forecasting, the approach can track both the electrical variables and transmission lines’ temperature varying trajectory under anticipated contingencies. Accordingly, it identifies the serious contingencies by transmission lines’ temperature violation rather than its power flow, in this case the time margin of temperature rising under each serious contingency can be provided to operators as warning information and some unnecessary security control can also be avoided. Finally, numerical simulations are carried out to testify the validity of the proposed approach.
文摘In recent years, Combined electro-thermal system has developed rapidly. In order to provide the initial data for the analysis of the combined electro-thermal system, a practical energy flow calculation method for the combined electro-thermal system is proposed in this paper. Based on the detailed analysis of the topology structure of the heating network and its hydraulic and thermodynamic model, the forward-backward sweep method for the heat flow of the heating network is established, which is more suitable for the actual radial heating network. The electric and thermal coupling model for heating source, such as thermoelectric unit and electric boiler is established, and the heat flow of heating network and the power flow of power grid are calculated orderly, thus a fast calculation method for the combined electro-thermal system is formed. What’s more, a combined electro-thermal system with two-stage peak-shaving electric boiler is used as the example system. This paper validates the effectiveness and rapidity of this method through the example system, and analyzes the influence for the energy flow of combined electro-thermal system caused by the operating parameters such as the installation location of electric boiler, the outlet water temperature of heat source and the outlet flow rate, etc.
文摘A polycrystalline dense Ti3SiC2 based ceramic material has been produced by several techniques. The effect of addition of TiC and SiC is also studied. The Ti3SiC2 material shows extraordinary electrical, thermal and mechanical properties. Furthermore, it shows a damage tolerance capability and oxidation resistance. In this work, we have synthesized Ti3SiC2 by electro-thermal explosion chemical reaction (ETE) with high current density (900 Amperes/a.u) followed by uniaxial pressure. The structural properties of the as-prepared materials are studied by x-ray diffraction (XRD), scanning electron microscope (SEM) and energy dispersive x-ray spectroscopy (EDX) techniques. The chemical cartography, imaging and electronic properties are investigated using Ultra-STEM and electron high energy loss resolution spectroscopy (EELS) techniques, respectively. The surface of Ti3SiC2 is characterized by means of X-ray photoelectron spectroscopy (XPS). High resolution C 1s, Si 2p, Ti 2p, Ti 3s core level spectra are explained in terms of crystallographic and electronic structure. Valence band spectrum is performed to confirm the validity of the theoretical calculations.
