Based on three different kinds of conductive paths in microstructure of soil and theory of electrochemical impedance spectroscopy(EIS), an integrated equivalent circuit model and impedance formula for soils were propo...Based on three different kinds of conductive paths in microstructure of soil and theory of electrochemical impedance spectroscopy(EIS), an integrated equivalent circuit model and impedance formula for soils were proposed, which contain 6 meaningful resistance and reactance parameters. Considering the conductive properties of soils and dispersion effects, mathematical equations for impedance under various circuit models were deduced and studied. The mathematical expression presents two semicircles for theoretical EIS Nyquist spectrum, in which the center of one semicircle is degraded to simply the equivalent model. Based on the measured parameters of EIS Nyquist spectrum, meaningful soil parameters can easily be determined. Additionally, EIS was used to investigate the soil properties with different water contents along with the mathematical relationships and mechanism between the physical parameters and water content. Magnitude of the impedance decreases with the increase of testing frequency and water content for Bode graphs. The proposed model would help us to better understand the soil microstructure and properties and offer more reasonable explanations for EIS spectra.展开更多
Vanadium pentoxide xerogel films used for lithium rechargeable batteries were prepared from crystalline c-V2O5 by melt quenching method,then the electrochemical process of lithium intercalation into vanadium pentoxide...Vanadium pentoxide xerogel films used for lithium rechargeable batteries were prepared from crystalline c-V2O5 by melt quenching method,then the electrochemical process of lithium intercalation into vanadium pentoxide xerogel films was simulated with an equivalent circuit model, which was derived from the mechanism of electrode reactions. Measured electrochemical impedance spectra at various electrode potentials were analyzed by using the complex non-linear least-squares fitting method. The results show that impedance spectra consist of 2 high-to- medium frequency depressed arcs and a low frequency straight line. The high frequency arc is attributed to the absorption reaction of lithium ions into the oxide film, the medium frequency arc is attributed to the charge transfer reaction at the vanadium oxide/electrolyte interface and the low frequency is characterized by a straight line with a phase angle of 45° corresponding to the diffusion of lithium ion through vanadium oxide phase. The experimental and calculated results are compared and discussed focusing on the electrochemical performance and the state of charge of the electrode. Moreover, the high consistence of the fitted values of the model to the experimental data indicates that this mathematical model does give a satisfying description of the intercalation process of vanadium pentoxide xerogel films.展开更多
In order to investigate the anticorrosion performance of the organic coating/metal system, electrochemical impedance spectra （EIS） were measured in the 3.5wt% NaCl solution, the chemical component and the formation ...In order to investigate the anticorrosion performance of the organic coating/metal system, electrochemical impedance spectra （EIS） were measured in the 3.5wt% NaCl solution, the chemical component and the formation of corrosion products scale were analyzed by laser Raman microspectroscopy, and the pattern of the organic coating/metal system was observed by scanning electron microscopy （SEM）. The characteristics and the delamination process of the organic coating/metal system were investigated systematically, and the emphases were on the transportation of the corrosive medium and the changes of the coating/metal interface. The results show that the impedance decreases at the initial immersion, then increases at the middle-immersion, and again decreases at last, which is related to the corrosion products scale. The concentration of Cl in the coating, which destroys the corrosion products scale, increases with the immersion time.展开更多
The corrosion inhibition for carbon steel in circulating cooling water by modified lignosulphonate has been investigated using electrochemical impedance spectroscopy technique. Results show that the inhibition efficie...The corrosion inhibition for carbon steel in circulating cooling water by modified lignosulphonate has been investigated using electrochemical impedance spectroscopy technique. Results show that the inhibition efficiency of modified lignosulphonate GCL2 is a great improvement on that of lignosulphonate. The maximum inhibition efficiency of GCL2 reaches 99.21% at the concentration of 400mg·L^-1 at 303K. The corrosion inhibition of GCL2 is attributed to forming adsorption film on the metal surface for the electrochemical impedance spectroscopy in GCL2 solution shows more than one time-constant.Moreover,results also indicate that it is more efficient in stirring solution than in still solution for GCL2 because the constant of adsorption in stirring solution is much larger than that in still solution. The adsorption of inhibitor GCL2 follows Langmuir＇s adsorption isotherm.展开更多
The present study aims at understanding the electrochemical impedance and biocorrosion characteristics of AZ91 Mg-alloy in Ringer’s solution.As-cast AZ91 Mg-alloy was subjected to T4 heat treatment in a way to homoge...The present study aims at understanding the electrochemical impedance and biocorrosion characteristics of AZ91 Mg-alloy in Ringer’s solution.As-cast AZ91 Mg-alloy was subjected to T4 heat treatment in a way to homogenize its microstructure by dissolving most of theβ-Mg 17 Al 12 phase at the vicinity of grain boundaries.The electrochemical impedance and biocorrosion performances of these two different microstructures(as-cast and T4 heat treated AZ91 Mg-alloys)in Ringer solution were evaluated by electrochemical impendence spectroscopy,potentiodynamic polarization and weight loss method.EIS spectra showed that both microstructures exhibit similar dynamic response as a function of the immersion time;however,the value of impedance and maximum phase angle are about 50%higher in as-cast AZ91 Mg-alloy as compared to that of homogenized AZ91 Mg-alloy.Weight loss measurement indicated that corrosion resistance of as-cast AZ91 was significantly better than that of homogenized AZ91.Microstructural and XRD analysis revealed that as-cast AZ91 contains a passive film of MgCO_(3)and CaCO_(3)precipitates with near spherical morphologies,whereas homogenized AZ91 comprised mainly unstable Mg(OH)_(2)film featured by irregular plate-like morphologies.展开更多
The electrochemical characteristics of 1Cr18Ni9Ti in sulphate-reducing bacteria （SRB） solutions and the biofilm of SRB on the surface of the 1Cr18Ni9Ti electrode were studied by electrochemical, microbiological, and...The electrochemical characteristics of 1Cr18Ni9Ti in sulphate-reducing bacteria （SRB） solutions and the biofilm of SRB on the surface of the 1Cr18Ni9Ti electrode were studied by electrochemical, microbiological, and surface analysis methods. Electrochemical impedance spectroscopy （EIS） of 1Cr18Ni9Ti was measured in the solutions with and without SRB at the culture time of 2, 4, 8 d, respectively. The measurement used two test methods, the nonimmersion electrode method and the immersion electrode method. It was found that the polarization resistance （Rp） of 1Cr18Ni9Ti in the solutions without SRB is the greatest for each test method. When using the nonimmersion electrode method, Rp shifts negatively at first and then positively, and the time constant is only one. Although using the immersion electrode method, the Rp shifts positively at first and then negatively, and the time constant also changes when the biofilm forms. The biofilm observed through SEM is with pores. It was demonstrated that SRB has accelerated corrosion action on 1Cr18Ni9Ti. The protection effect of the biofilm on the electrode depends on the compact degree of the film.展开更多
The corrosion behavior and electrochemical impedance spectroscopy (EIS) features of 8090 Al-Li alloys in EXCO solution were investigated, and the EIS was simulated using an equivalent circuit. At the beginning of imme...The corrosion behavior and electrochemical impedance spectroscopy (EIS) features of 8090 Al-Li alloys in EXCO solution were investigated, and the EIS was simulated using an equivalent circuit. At the beginning of immersion in EXCO solution, the EIS is comprised by a depressed capacitive arc at high-mediate frequency and an inductive arc at low frequency, and the inductive component decreases and disappears with im- mersion time. Once exfoliation or severe pitting corrosion is produced, two capacitive arcs appear in the EIS. These two capacitive arcs are originated from the two parts of the corroded alloy surface, the original flat alloy surface and the new inter-face exposed to the aggressive EXCO solution due to the exfoliation or pitting corrosion. Some corrosion development features of 8090 Al-Li alloys in EXCO solution can be obtained through simulated EIS information.展开更多
The exfoliation corrosion susceptibility and electrochemical impedance spectrosc opy(EIS) of rolled and peak-aged 8090 Al-Li alloys in EXCO solution were studi ed,and the EIS after exfoliation was simulated. Once exfo...The exfoliation corrosion susceptibility and electrochemical impedance spectrosc opy(EIS) of rolled and peak-aged 8090 Al-Li alloys in EXCO solution were studi ed,and the EIS after exfoliation was simulated. Once exfoliation occurs,two ca pacitive arcs appear in the EIS at high-mediate frequency and mediate-low freq uency respectively. The exfoliation-attacked alloy surface consists of two part s,an original flat alloy surface and a new inter-face exposed to EXCO solution due to the exfoliation. The capacitance corresponding to the new exfoliation in ter-face increases approximately linearly with time at early exfoliation stage,due to the enlargement of the new inter-face. Then it maintains stable,due to the corrosion product covering on the new inter-face. The exfoliation suscepti bility can be judged through the average slope of the capacitance vs time curve of the early exfoliation stage. This average slope of the rolled 8090 alloy is m uch higher than that of the peak-aged 8090 alloy,accordingly the rolled 8090 a lloy is more susceptible to exfoliation than the peak-aged 8090 alloy.展开更多
The exfoliation morphologies and electrochemical impedance spectroscopy (EIS) features of as received rolled AA8090 Al Li alloy in EXCO solution were studied. The EIS was simulated using an equivalent circuit. The res...The exfoliation morphologies and electrochemical impedance spectroscopy (EIS) features of as received rolled AA8090 Al Li alloy in EXCO solution were studied. The EIS was simulated using an equivalent circuit. The results show that once the exfoliation occurs, the EIS is composed of two capacitive arcs at high frequency and mediate low frequency; among them, the capacitance corresponding to high frequency ( C 1) is originated from original flat alloy surface, while the capacitance corresponding to mediate low frequency ( C 2) from new interface exposed to EXCO solution due to the exfoliation and the ratio of C 2 to C 1 increases with exfoliation degree. It is advanced that the exfoliation degree can be quantitatively judged through this ratio.展开更多
Degradation behavior is the main technical problem in the field of commercial application of lithiumion batteries. According to the characteristics of voltage, discharge capacity and inner resistance during the charge...Degradation behavior is the main technical problem in the field of commercial application of lithiumion batteries. According to the characteristics of voltage, discharge capacity and inner resistance during the charge/discharge process of commercial lithium-ion batteries of mobile telephone, degradation analysis and related mechanisms are put forward and discussed in the paper. The impedance spectra of prismatic commercial lithium-ion batteries are measured at various state of charge after different charge/discharge cycles. The incastared impedance spectra are discussed with a proposed equivalent circuit. Results indicated that the structure change of electrode materials or swell and shrink of crystal lattice, decompose of electrolyte, dissolution of active materials and solid electrolyte interphase film formation are the main reasons leading to the capacity degradation.展开更多
基金Projects(5120833351078253)supported by the National Natural Science Foundation of China+4 种基金Projects(2014011036-12014131019TYUT2014YQ017OIT2015)supported by the Natural Science Foundation of Shanxi ProvinceChina
文摘Based on three different kinds of conductive paths in microstructure of soil and theory of electrochemical impedance spectroscopy(EIS), an integrated equivalent circuit model and impedance formula for soils were proposed, which contain 6 meaningful resistance and reactance parameters. Considering the conductive properties of soils and dispersion effects, mathematical equations for impedance under various circuit models were deduced and studied. The mathematical expression presents two semicircles for theoretical EIS Nyquist spectrum, in which the center of one semicircle is degraded to simply the equivalent model. Based on the measured parameters of EIS Nyquist spectrum, meaningful soil parameters can easily be determined. Additionally, EIS was used to investigate the soil properties with different water contents along with the mathematical relationships and mechanism between the physical parameters and water content. Magnitude of the impedance decreases with the increase of testing frequency and water content for Bode graphs. The proposed model would help us to better understand the soil microstructure and properties and offer more reasonable explanations for EIS spectra.
文摘Vanadium pentoxide xerogel films used for lithium rechargeable batteries were prepared from crystalline c-V2O5 by melt quenching method,then the electrochemical process of lithium intercalation into vanadium pentoxide xerogel films was simulated with an equivalent circuit model, which was derived from the mechanism of electrode reactions. Measured electrochemical impedance spectra at various electrode potentials were analyzed by using the complex non-linear least-squares fitting method. The results show that impedance spectra consist of 2 high-to- medium frequency depressed arcs and a low frequency straight line. The high frequency arc is attributed to the absorption reaction of lithium ions into the oxide film, the medium frequency arc is attributed to the charge transfer reaction at the vanadium oxide/electrolyte interface and the low frequency is characterized by a straight line with a phase angle of 45° corresponding to the diffusion of lithium ion through vanadium oxide phase. The experimental and calculated results are compared and discussed focusing on the electrochemical performance and the state of charge of the electrode. Moreover, the high consistence of the fitted values of the model to the experimental data indicates that this mathematical model does give a satisfying description of the intercalation process of vanadium pentoxide xerogel films.
文摘In order to investigate the anticorrosion performance of the organic coating/metal system, electrochemical impedance spectra （EIS） were measured in the 3.5wt% NaCl solution, the chemical component and the formation of corrosion products scale were analyzed by laser Raman microspectroscopy, and the pattern of the organic coating/metal system was observed by scanning electron microscopy （SEM）. The characteristics and the delamination process of the organic coating/metal system were investigated systematically, and the emphases were on the transportation of the corrosive medium and the changes of the coating/metal interface. The results show that the impedance decreases at the initial immersion, then increases at the middle-immersion, and again decreases at last, which is related to the corrosion products scale. The concentration of Cl in the coating, which destroys the corrosion products scale, increases with the immersion time.
基金supported by the National Natural Science Foundation of China(No.20276024)the Guangdong Provincial Laboratory of Green Chemical Technology
文摘The corrosion inhibition for carbon steel in circulating cooling water by modified lignosulphonate has been investigated using electrochemical impedance spectroscopy technique. Results show that the inhibition efficiency of modified lignosulphonate GCL2 is a great improvement on that of lignosulphonate. The maximum inhibition efficiency of GCL2 reaches 99.21% at the concentration of 400mg·L^-1 at 303K. The corrosion inhibition of GCL2 is attributed to forming adsorption film on the metal surface for the electrochemical impedance spectroscopy in GCL2 solution shows more than one time-constant.Moreover,results also indicate that it is more efficient in stirring solution than in still solution for GCL2 because the constant of adsorption in stirring solution is much larger than that in still solution. The adsorption of inhibitor GCL2 follows Langmuir＇s adsorption isotherm.
文摘The present study aims at understanding the electrochemical impedance and biocorrosion characteristics of AZ91 Mg-alloy in Ringer’s solution.As-cast AZ91 Mg-alloy was subjected to T4 heat treatment in a way to homogenize its microstructure by dissolving most of theβ-Mg 17 Al 12 phase at the vicinity of grain boundaries.The electrochemical impedance and biocorrosion performances of these two different microstructures(as-cast and T4 heat treated AZ91 Mg-alloys)in Ringer solution were evaluated by electrochemical impendence spectroscopy,potentiodynamic polarization and weight loss method.EIS spectra showed that both microstructures exhibit similar dynamic response as a function of the immersion time;however,the value of impedance and maximum phase angle are about 50%higher in as-cast AZ91 Mg-alloy as compared to that of homogenized AZ91 Mg-alloy.Weight loss measurement indicated that corrosion resistance of as-cast AZ91 was significantly better than that of homogenized AZ91.Microstructural and XRD analysis revealed that as-cast AZ91 contains a passive film of MgCO_(3)and CaCO_(3)precipitates with near spherical morphologies,whereas homogenized AZ91 comprised mainly unstable Mg(OH)_(2)film featured by irregular plate-like morphologies.
文摘The electrochemical characteristics of 1Cr18Ni9Ti in sulphate-reducing bacteria （SRB） solutions and the biofilm of SRB on the surface of the 1Cr18Ni9Ti electrode were studied by electrochemical, microbiological, and surface analysis methods. Electrochemical impedance spectroscopy （EIS） of 1Cr18Ni9Ti was measured in the solutions with and without SRB at the culture time of 2, 4, 8 d, respectively. The measurement used two test methods, the nonimmersion electrode method and the immersion electrode method. It was found that the polarization resistance （Rp） of 1Cr18Ni9Ti in the solutions without SRB is the greatest for each test method. When using the nonimmersion electrode method, Rp shifts negatively at first and then positively, and the time constant is only one. Although using the immersion electrode method, the Rp shifts positively at first and then negatively, and the time constant also changes when the biofilm forms. The biofilm observed through SEM is with pores. It was demonstrated that SRB has accelerated corrosion action on 1Cr18Ni9Ti. The protection effect of the biofilm on the electrode depends on the compact degree of the film.
文摘The corrosion behavior and electrochemical impedance spectroscopy (EIS) features of 8090 Al-Li alloys in EXCO solution were investigated, and the EIS was simulated using an equivalent circuit. At the beginning of immersion in EXCO solution, the EIS is comprised by a depressed capacitive arc at high-mediate frequency and an inductive arc at low frequency, and the inductive component decreases and disappears with im- mersion time. Once exfoliation or severe pitting corrosion is produced, two capacitive arcs appear in the EIS. These two capacitive arcs are originated from the two parts of the corroded alloy surface, the original flat alloy surface and the new inter-face exposed to the aggressive EXCO solution due to the exfoliation or pitting corrosion. Some corrosion development features of 8090 Al-Li alloys in EXCO solution can be obtained through simulated EIS information.
文摘The exfoliation corrosion susceptibility and electrochemical impedance spectrosc opy(EIS) of rolled and peak-aged 8090 Al-Li alloys in EXCO solution were studi ed,and the EIS after exfoliation was simulated. Once exfoliation occurs,two ca pacitive arcs appear in the EIS at high-mediate frequency and mediate-low freq uency respectively. The exfoliation-attacked alloy surface consists of two part s,an original flat alloy surface and a new inter-face exposed to EXCO solution due to the exfoliation. The capacitance corresponding to the new exfoliation in ter-face increases approximately linearly with time at early exfoliation stage,due to the enlargement of the new inter-face. Then it maintains stable,due to the corrosion product covering on the new inter-face. The exfoliation suscepti bility can be judged through the average slope of the capacitance vs time curve of the early exfoliation stage. This average slope of the rolled 8090 alloy is m uch higher than that of the peak-aged 8090 alloy,accordingly the rolled 8090 a lloy is more susceptible to exfoliation than the peak-aged 8090 alloy.
文摘The exfoliation morphologies and electrochemical impedance spectroscopy (EIS) features of as received rolled AA8090 Al Li alloy in EXCO solution were studied. The EIS was simulated using an equivalent circuit. The results show that once the exfoliation occurs, the EIS is composed of two capacitive arcs at high frequency and mediate low frequency; among them, the capacitance corresponding to high frequency ( C 1) is originated from original flat alloy surface, while the capacitance corresponding to mediate low frequency ( C 2) from new interface exposed to EXCO solution due to the exfoliation and the ratio of C 2 to C 1 increases with exfoliation degree. It is advanced that the exfoliation degree can be quantitatively judged through this ratio.
基金"973"Project (2002CB211800)Teaching and Research Fund of Beijing Institute of Technology(20070542008)
文摘Degradation behavior is the main technical problem in the field of commercial application of lithiumion batteries. According to the characteristics of voltage, discharge capacity and inner resistance during the charge/discharge process of commercial lithium-ion batteries of mobile telephone, degradation analysis and related mechanisms are put forward and discussed in the paper. The impedance spectra of prismatic commercial lithium-ion batteries are measured at various state of charge after different charge/discharge cycles. The incastared impedance spectra are discussed with a proposed equivalent circuit. Results indicated that the structure change of electrode materials or swell and shrink of crystal lattice, decompose of electrolyte, dissolution of active materials and solid electrolyte interphase film formation are the main reasons leading to the capacity degradation.
