MOF‐derived 1D/3D N‐doped porous carbon for spatially confined electrochemical CO_(2) reduction to adjustable syngas

Electrochemical reduction of CO_(2) to syngas(CO and H_(2))offers an efficient way to mitigate carbon emissions and store intermittent renewable energy in chemicals.Herein,the hierarchical one‐dimensional/three‐dimensional nitrogen‐doped porous carbon(1D/3D NPC)is prepared by carbonizing the composite of Zn‐MOF‐74 crystals in situ grown on a commercial melamine sponge(MS),for electrochemical CO_(2) reduction reaction(CO_(2)RR).The 1D/3D NPC exhibits a high CO/H_(2) ratio(5.06)and CO yield(31 mmol g^(−1)h^(−1))at−0.55 V,which are 13.7 times and 21.4 times those of 1D porous carbon(derived from Zn‐MOF‐74)and N‐doped carbon(carbonized by MS),respectively.This is attributed to the unique spatial environment of 1D/3D NPC,which increases the adsorption capacity of CO_(2) and promotes electron transfer from the 3D N‐doped carbon framework to 1D carbon,improving the reaction kinetics of CO_(2)RR.Experimental results and charge density difference plots indicate that the active site of CO_(2)RR is the positively charged carbon atom adjacent to graphitic N on 1D carbon and the active site of HER is the pyridinic N on 1D carbon.The presence of pyridinic N and pyrrolic N reduces the number of electron transfer,decreasing the reaction kinetics and the activity of CO_(2)RR.The CO/H_(2) ratio is related to the distribution of N species and the specific surface area,which are determined by the degree of spatial confinement effect.The CO/H_(2) ratios can be regulated by adjusting the carbonization temperature to adjust the degree of spatial confinement effect.Given the low cost of feedstock and easy strategy,1D/3D NPC catalysts have great potential for industrial application.

Chalcogen heteroatoms doped nickel-nitrogen-carbon single-atom catalysts with asymmetric coordination for efficient electrochemical CO_(2) reduction

The electronic configuration of central metal atoms in single-atom catalysts(SACs)is pivotal in electrochemical CO_(2) reduction reaction(eCO_(2)RR).Herein,chalcogen heteroatoms(e.g.,S,Se,and Te)were incorporated into the symmetric nickel-nitrogen-carbon(Ni-N_(4)-C)configuration to obtain Ni-X-N_(3)-C(X:S,Se,and Te)SACs with asymmetric coordination presented for central Ni atoms.Among these obtained Ni-X-N_(3)-C(X:S,Se,and Te)SACs,Ni-Se-N_(3)-C exhibited superior eCO_(2)RR activity,with CO selectivity reaching~98% at-0.70 V versus reversible hydrogen electrode(RHE).The Zn-CO_(2) battery integrated with Ni-Se-N_(3)-C as cathode and Zn foil as anode achieved a peak power density of 1.82 mW cm^(-2) and maintained remarkable rechargeable stability over 20 h.In-situ spectral investigations and theoretical calculations demonstrated that the chalcogen heteroatoms doped into the Ni-N_(4)-C configuration would break coordination symmetry and trigger charge redistribution,and then regulate the intermediate behaviors and thermodynamic reaction pathways for eCO_(2)RR.Especially,for Ni-Se-N_(3)-C,the introduced Se atoms could significantly raise the d-band center of central Ni atoms and thus remarkably lower the energy barrier for the rate-determining step of ^(*)COOH formation,contributing to the promising eCO_(2)RR performance for high selectivity CO production by competing with hydrogen evolution reaction.

Bimetallic In_(2)O_(3)/Bi_(2)O_(3) Catalysts Enable Highly Selective CO_(2) Electroreduction to Formate within Ultra-Broad Potential Windows

CO_(2)electrochemical reduction reaction(CO_(2)RR)to formate is a hopeful pathway for reducing CO_(2)and producing high-value chemicals,which needs highly selective catalysts with ultra-broad potential windows to meet the industrial demands.Herein,the nanorod-like bimetallic ln_(2)O_(3)/Bi_(2)O_(3)catalysts were successfully synthesized by pyrolysis of bimetallic InBi-MOF precursors.The abundant oxygen vacancies generated from the lattice mismatch of Bi_(2)O_(3)and ln_(2)O_(3)reduced the activation energy of CO_(2)to*CO_(2)·^(-)and improved the selectivity of*CO_(2)·^(-)to formate simultaneously.Meanwhile,the carbon skeleton derived from the pyrolysis of organic framework of InBi-MOF provided a conductive network to accelerate the electrons transmission.The catalyst exhibited an ultra-broad applied potential window of 1200 mV(from-0.4 to-1.6 V vs RHE),relativistic high Faradaic efficiency of formate(99.92%)and satisfactory stability after 30 h.The in situ FT-IR experiment and DFT calculation verified that the abundant oxygen vacancies on the surface of catalysts can easily absorb CO_(2)molecules,and oxygen vacancy path is dominant pathway.This work provides a convenient method to construct high-performance bimetallic catalysts for the industrial application of CO_(2)RR.

Elucidating the Role of Mass Transfer in Electrochemical Redox Reactions on Electrospun Fibers

Mass transfer can tune the surface concentration of reactants and products and subsequently infl uence the catalytic perfor-mance.The morphology of nanomaterials plays an important role in the mass transfer of reaction microdomains,but related studies are lacking.Herein,a facile electrospinning technique utilizing cellulose was employed to fabricate a series of carbon nanofi bers with diff erent diameters,which exhibited excellent electrochemical nitrate reduction reaction and oxygen evolu-tion reaction activities.Furthermore,the microstructure of electrocatalysts could infl uence the gas-liquid-solid interfacial mass transfer,resulting in diff erent electrochemical performances.

Activation of Transition Metal(Fe,Co and Ni)-Oxide Nanoclusters by Nitrogen Defects in Carbon Nanotube for Selective CO_(2) Reduction Reaction

The electrochemical carbon dioxide reduction reaction(CO_(2)RR),which can produce value-added chemical feedstocks,is a proton-coupled-electron process with sluggish kinetics.Thus,highly efficient,cheap catalysts are urgently required.Transition metal oxides such as CoO_(x),FeO_(x),and NiO_(x)are low-cost,low toxicity,and abundant materials for a wide range of electrochemical reactions,but are almost inert for CO_(2)RR.Here,we report for the first time that nitrogen doped carbon nanotubes(N-CNT)have a surprising activation effect on the activity and selectivity of transition metal-oxide(MO_(x)where M=Fe,Ni,and Co)nanoclusters for CO_(2)RR.MO_(x)supported on N-CNT,MO_(x)/N-CNT,achieves a CO yield of 2.6–2.8 mmol cm−2 min−1 at an overpotential of−0.55 V,which is two orders of magnitude higher than MO_(x)supported on acid treated CNTs(MO_(x)/O-CNT)and four times higher than pristine N-CNT.The faraday efficiency for electrochemical CO_(2)-to-CO conversion is as high as 90.3%at overpotential of 0.44 V.Both in-situ XAS measurements and DFT calculations disclose that MO_(x)nanoclusters can be hydrated in CO_(2)saturated KHCO_(3),and the N defects of N-CNT effectively stabilize these metal hydroxyl species under carbon dioxide reduction reaction conditions,which can split the water molecules and provide local protons to inhibit the poisoning of active sites under carbon dioxide reduction reaction conditions.

Enhancing ammonia production rates from electrochemical nitrogen reduction by engineering three-phase boundary with phosphorus-activated Cu catalysts

Electrochemical N_(2) reduction reaction(eNRR) over Cu-based catalysts suffers from an intrinsically low activity of Cu for activation of stable N_(2) molecules and the limited supply of N_(2) to the catalyst due to its low solubility in aqueous electrolytes.Herein,we propose phosphorus-activated Cu electrocatalysts to generate electron-deficient Cu sites on the catalyst surface to promote the adsorption of N_(2) molecules.The eNRR system is further modified using a gas diffusion electrode(GDE) coated with polytetrafluoroethylene(PTFE) to form an effective three-phase boundary of liquid water-gas N_(2)-solid catalyst to facilitate easy access of N_(2) to the catalytic sites.As a result,the new catalyst in the flow-type cell records a Faradaic efficiency of 13.15% and an NH_(3) production rate of 7.69 μg h^(-1) cm^(-2) at-0.2 V_(RHE),which represent 3.56 and 59.2 times increases from those obtained with a pristine Cu electrode in a typical electrolytic cell.This work represents a successful demonstration of dual modification strategies;catalyst modification and N_(2) supplying system engineering,and the results would provide a useful platform for further developments of electrocatalysts and reaction systems.

Zeolite-mediated hybrid Cu^(+)/Cu~0 interface for electrochemical nitrate reduction to ammonia

The electrocatalytic conversion of reactive nitrogen species to ammonia is a promising strategy for efficient NH_(3) synthesis.In this study,we reveal that the hybrid Cu^(+)/Cu~0 interface is catalytically active for electrochemical ammonia synthesis from nitrate reduction.To maintain the hybrid Cu^(+)/Cu~0 state at negative reaction potentials,hydrophilic zeolite is used to modify Cu/Cu_(2)O electrocatalyst,which demonstrates an impressive NH_(3) production rate of 41.65 mg h^(-1) cm^(-2)with ~100% Faradaic efficiency of ammonia synthesis at-0.6 V vs.RHE.In-situ Raman spectroscopy unveil the high activity originates from the zeolite reconstruction at the electrode–electrolyte interface,which protects the valence state of Cu~0/Cu^(+) site under negative potential and promotes electrochemical activity towards NH_(3) synthesis.

Transition metal-nitrogen sites for electrochemical carbon dioxide reduction reaction

Electrochemical CO2 reduction reaction(CO2RR)powered by renewable electricity has emerged as the most promising technique for CO2 conversion,making it possible to realize a carbon‐neutral cycle.Highly efficient,robust,and cost‐effective catalysts are highly demanded for the near‐future practical applications of CO2RR.Previous studies on atomically dispersed metal‐nitrogen(M‐Nx)sites constituted of earth abundant elements with maximum atom‐utilization efficiency have demonstrated their performance towards CO2RR.This review summarizes recent advances on a variety of M‐Nx sites‐containing transition metal‐centered macrocyclic complexes,metal organic frameworks,and M‐Nx‐doped carbon materials for efficient CO2RR,including both experimental and theoretical studies.The roles of metal centers,coordinated ligands,and conductive supports on the intrinsic activity and selectivity,together with the importance of reaction conditions for improved performance are discussed.The mechanisms of CO2RR over these M‐Nx‐containing materials are presented to provide useful guidance for the rational design of efficient catalysts towards CO2RR.

Bi-Atom Electrocatalyst for Electrochemical Nitrogen Reduction Reactions

The electrochemical nitrogen reduction reaction(NRR)to directly produce NH3 from N_(2) and H_(2)O under ambient conditions has attracted significant attention due to its ecofriendliness.Nevertheless,the electrochemical NRR presents several practical challenges,including sluggish reaction and low selectivity.Here,bi-atom catalysts have been proposed to achieve excellent activity and high selectivity toward the electrochemical NRR by Ma and his co-workers.It could accelerate the kinetics of N_(2)-to-NH_(3) electrochemical conversion and possess better electrochemical NRR selectivity.This work sheds light on the introduction of bi-atom catalysts to enhance the performance of the electrochemical NRR.

A combinatorial descriptor for volcano relationships of electrochemical nitrogen reduction reaction

Though touted as a potential way to realize clean ammonia synthesis,electrochemical ammonia synthesis is currently limited by its catalytic efficiency.Great effort has been made to find catalysts with improved activity toward electrochemical nitrogen reduction reaction(eNRR).Rational screening of catalysts can be facilitated using the volcano relationship between catalytic activity and adsorption energy of an intermediate,namely,the activity descriptor.In this work,we proposeΔG^(*)_(NH_(2))+ΔG^(*)_(NNH)as a combinatorial descriptor,which shows better predictive power than traditional descriptors using the adsorption free energies of single intermediates.The volcano plots based on the combinatorial descriptor exhibits peak activity fixedly at the descriptor value corresponding to the formation free energy of NH3,regardless of the catalyst types;while the descriptor values correspond to the top activities for eNRR on volcano plots based on single descriptors usually vary with the types of catalysts.

CeO_(x)-supported monodispersed MoO_(3) clusters for high-efficiency electrochemical nitrogen reduction under ambient condition

Developing efficient and low-cost electrocatalysts is essential for the electroreduction of N_(2) to NH_(3).Here,highly monodispersed MoO_(3) clusters loaded on a coral-like CeO_(x)compound with abundant oxygen vacancies are successfully prepared by an impregnation-reduction method.The MoO_(3) clusters with small sizes of 2.6±0.5 nm are induced and anchored by the oxygen vacancies of CeO_(x),resulting in excellent nitrogen reduction reaction(NRR)performance.Additionally,the synergistic effects between MoO_(3) and CeO_(x)lead to a further improvement of the electrochemical performance.The as-prepared MoO_(3)-CeO_(x)catalyst shows an NH_(3) yield rate of 32.2 μg h^(-1) mg^(-1) cat and a faradaic efficiency of 7.04%at-0.75 V(vs.reversible hydrogen electrode)in 0.01 M Dulbecco’s Phosphate Buffered Saline.Moreover,it displays decent electrochemical stability over 30,000 s.Besides,the electrochemical NRR mechanism for MoO_(3)-CeO_(x)is investigated by in-situ Fourier transform infrared spectroscopy.N-H stretching,H-N-H bending,and N-N stretching are detected during the reaction,suggesting that an associative pathway is followed.This work provides an approach to designing and synthesizing potential electrocatalysts for NRR.

Cu-Zn-based alloy/oxide interfaces for enhanced electroreduction of CO_(2) to C_(2+) products

The electrochemical CO_(2)reduction reaction to produce multi-carbon(C_(2+)) hydrocarbons or oxygenate compounds is a promising route to obtain a renewable fuel of high energy density.However,producing C_(2+)at high current densities is still a challenge.Herein,we develop a Cu-Zn alloy/Cu-Zn aluminate oxide composite electrocatalytic system for enhanced conversion of CO_(2)to C_(2+)products.The Cu-Zn-Al-Layered Double Hydroxide(LDH) is used as a precursor to decompose into uniform Cu-Zn oxide/Cu-Zn aluminate pre-catalyst.Under electrochemical reduction,Cu-Zn oxide generates Cu-Zn alloy while Cu-Zn aluminate oxide remains unchanged.The alloy and oxide are closely stacked and arranged alternately,and the aluminate oxide induces the strong electron interaction of Cu,Zn and Al,creating a large number of highly active reaction interfaces composed of 0 to+3 valence metal sites.With the help of the interface effect,the optimized Cu_(9)Zn_(1)/Cu_(0.8)Zn_(0.2)Al_(2)O_(4)catalyst achieves a Faradaic efficiency of 88.5% for C_(2+)products at a current density of 400 mA cm^(-2)at-1.15 V versus reversible hydrogen electrode.The in-situ Raman and attenuate total reflectance-infrared absorption spectroscopy(ATR-IRAS) spectra show that the aluminate oxide at the interface significantly enhances the adsorption and activation of CO_(2)and the dissociation of H2O and strengthens the adsorption of CO intermediates,and the alloy promotes the C-C coupling to produce C_(2+)products.This work provides an efficient strategy to construct highly active reaction interfaces for industrial-scale electrochemical CO_(2)RR.

Rational catalyst design and interface engineering for electrochemical CO_(2) reduction to high-valued alcohols

Electrochemical CO_(2) reduction(eCO_(2)RR) is an emerging strategy to address the global carbon balance issues and fulfill the carbon-neutral goal through converting CO_(2) to value-added chemicals/fuels driven by renewable energy sources. The production of highly reduced carbon compounds beyond CO and formate, especially oxygenate alcohol products with high energy densities and large global market capacities, is particularly desirable for practical applications. However, the building of alcohol-selective e CO_(2)RR electrocatalysis systems to overcome the high overpotential and poor durability remains a big challenge.Recently, diverse strategies have been developed for rational catalyst design towards alcohol productions from e CO_(2)RR on the basis of the corresponding reaction mechanisms. In this review article, we firstly highlight recent advances in fundamental understanding of mechanisms in three electrochemical CO_(2)-alcohol reaction pathways. Then, the design strategies focused on catalyst and interface design are summarized for building alcohol-selective e CO_(2)RR electrocatalysis systems. The advanced characterization techniques are also discussed to provide more insights into e CO_(2) RR-to-alcohols processes. Finally, the remaining challenges and perspectives for promoting e CO_(2)RR to alcohols are proposed.

Recent advances of bismuth-based electrocatalysts for CO_(2)reduction:Strategies,mechanism and applications

Electrocatalytic CO_(2)reduction reaction(CO_(2)RR),driven by clean electric energy such as solar and wind,can not only alleviate environmental greenhouse effect stemming from excessive CO_(2)emissions,but also realize the storage of renewable energy,for it guarantees the production of value-added chemicals and fuels.Among CO_(2)RR products,formic acid shows great advantages in low energy consumption and high added-value,and thus producing formic acid is generally considered as a profitable line for CO_(2)RR.Bismuth-based electrocatalysts exhibit high formic acid selectivity in CO_(2)RR.Herein,we review the recent progress in bismuth-based electrocatalysts for CO_(2)RR,including material synthesis,performance optimization/validation,and electrolyzers.The effects of morphologies,structure,and composition of bismuth-based electrocatalysts on CO_(2)RR performance are highlighted.Simultaneously,in situ spectroscopic characterization and DFT calculations for reaction mechanism of CO_(2)RR on Bi-based catalysts are emphasized.The applications and optimization of electrolyzers with high current density for CO_(2)RR are summarized.Finally,conclusions and future directions in this field are prospected.

Defect spinel oxides for electrocatalytic reduction reactions

Electrocatalytic reduction reactions play a crucial role in electrochemical energy conversion and storage technology,which are emerging technologies to ameliorate environmental problems.Spinel oxides are widely explored in electrocatalytic oxidation reactions but have a poor intrinsic ability to reduction reactions,making their electrocatalytic ability less effective.To improve this,defect engineering is a valuable method for regulating the electronic structure and coordination environment.Herein,this manuscript discusses the use of defect spinel oxides in electrocatalytic reduction reactions,including the different types of defects,construction methods,and characterization techniques.It also outlines the various applications of defect spinel oxides in different electrocatalytic reduction reactions.Finally,it goes over the challenges and future outlooks for defect spinels.This review aims to thoroughly explain how defect spinels work in electrocatalytic reduction reactions and serve as a helpful guide for creating effective electrocatalysts.

Inspecting design rules of metal-nitrogen-carbon catalysts for electrochemical CO_(2)reduction reaction:From a data science perspective

The development of inexpensive metal-nitrogen-carbon(M-N-C)catalysts for electrochemical CO_(2)reduction reaction(CO_(2)RR)on an industrial scale has come to a standstill.Although the number of related studies and reviews has grown fast,the complexity of the M-N-C composite has limited researchers to focus on only a few variables and carry out sluggish trial-and-error optimizations in their studies.As a result,the conclusions are drawn only by artificial analysis based on a few orthogonal experimental results.To obtain more general design strategies,we have innovatively introduced machine learning(ML)into this field to address this bottleneck.A standard workflow that comprehensively utilizes different ML algorithms and black-box interpretation methods is proposed for this purpose.Besides predicting CO_(2)RR performance metrics for M-N-C catalysts,such as maximum faradaic efficiency with great accuracy,the ML models have also indicated simple and clear design strategies that would guide future exploration from a data science perspective.Besides,we have also demonstrated the potential of the models in guiding the development of new material systems.We thereby believe that the new research paradigm proposed may accelerate the development of this field soon.

Operando HERFD-XANES and surface sensitive Δμ analyses identify the structural evolution of copper(Ⅱ) phthalocyanine for electroreduction of CO_(2)

The quantitative understanding of how atomic-level catalyst structural changes affect the reactivity of the electrochemical CO_(2)reduction reaction is challenging.Due to the complexity of catalytic systems,conventional in situ X-ray spectroscopy plays a limited role in tracing the underlying dynamic structural changes in catalysts active sites.Herein,operando high-energy resolution fluorescence-detected X-ray absorption spectroscopy was used to precisely identify the dynamic structural transformation of well-defined active sites of a representative model copper(Ⅱ)phthalocyanine catalyst which is of guiding significance in studying single-atom catalysis system.Comprehensive X-ray spectroscopy analyses,including surface sensitive△μspectra which isolates the surface changes by subtracting the disturb of bulk base and X-ray absorption near-edge structure spectroscopy simulation,were used to discover that Cu species aggregated with increasing applied potential,which is responsible for the observed evolution of C_(2)H_(4).The approach developed in this work,characterizing the active-site geometry and dynamic structural change,is a novel and powerful technique to elucidate complex catalytic mechanisms and is expected to con tribute to the rational design of highly effective catalysts.

Copper-based metal-organic frameworks for electrochemical reduction of CO_(2)

The electrochemical CO_(2)reduction reaction(CO_(2)ER)is an emerging process that involves utilizing CO_(2)to produce valuable chemicals and fuels by consuming excess electricity from renewable sources.Recently,Cu and Cu-based nanoparticles,as earth-abundant and economical metal sources,have been attracting significant interest.The chemical and physical properties of Cu-based nanoparticles are modified by different strategies,and CO_(2)can be converted into multicarbon products.Among various Cu-based nanoparticles,Cu-based metal-organic frameworks(MOFs)are gaining increasing interest in the field of catalysis because of their textural,topological,and electrocatalytic properties.In this minireview,we summarized and highlighted the main achievements in the research on Cu-based MOFs and their advantages in the CO_(2)ER as electrocatalysts,supports,or precursors.

High-Con cent rat ion Electrosynthesis of Formic Acid/Formate from CO_(2):Reactor and Electrode Design Strategies

The electrochemical CO_(2)reduction reaction(CO_(2)RR),driven by renewable energy,provides a potential carbon-neutral avenue to convert CO_(2)into valuable fuels and feedstocks.Conversion of CO_(2)into formic acid/formate is considered one of the economical and feasible methods,owing to their high energy densities,and ease of distribution and storage.The separation of formic acid/formate from the reaction mixtures accounts for the majority of the overall CO_(2)RR process cost,while the increment of product concentration can lead to the reduction of separation cost,remarkably.In this paper,we give an overview of recent strategies for highly concentrated formic acid/formate products in CO_(2)RR.CO_(2)RR is a complex process with several different products,as it has different intermediates and reaction pathways.Therefore,this review focuses on recent study strategies that can enhance targeted formic acid/formate yield,such as the all-solid-state reactor design to deliver a high concentration of products during the reduction of CO_(2)in the electrolyzer.Firstly,some novel electrolyzers are introduced as an engineering strategy to improve the concentration of the formic acid/formate and reduce the cost of downstream separations.Also,the design of planar and gas diffusion electrodes(GDEs)with the potential to deliver high-concentration formic acid/formate in CO_(2)RR is summarized.Finally,the existing technological challenges are highlighted,and further research recommendations to achieve high-concentration products in CO_(2)RR.This review can provide some inspiration for future research to further improve the product concentration and economic benefits of CO_(2)RR.

Tuning Double Layer Structure of WO3 Nanobelt for Promoting the Electrochemical Nitrogen Reduction Reaction in Water

Electrochemical fixation of nitrogen to ammonia with highly active,highly selective and low cost electrocatalysts is a sustainable alternative to the extremely energy-and capital-intensive Haber-Bosch process.Herein,we demonstrate a near electroneutral WO3 nanobelt catalyst to be a promising electrocatalyst for selective and efficient nitrogen reduction.The concept of near electroneutral interface is demonstrated by fabricating WO3 nanobelts with small zeta potential value on carbon fiber paper,which ensures a loose double layer structure of the electrode/electrolyte interface and allows nitrogen molecules access the active sites more easily and regulates proton transfer to increase the catalytic selectivity.The WO3/CFP electrode with optimal surface charge achieves a NH3 yield rate of 4.3μg·h-1·mg-1 and a faradaic efficiency of 37.3%at-0.3 V vs.RHE,rivalling the performance of the state-of-the-art nitrogen reduction reaction electrocatalysts.The result reveals that an unobstructed gas-diffusion pathway for continually supplying enough nitrogen to the active catalytic sites is of great importance to the overall catalytic performance.