Cu-Sn-Zn ternary alloy layer with 10 μm thickness was prepared through electroless plating method. The influences of process conditions including the concentration of metallic salts, reductant and complex agent on Cu...Cu-Sn-Zn ternary alloy layer with 10 μm thickness was prepared through electroless plating method. The influences of process conditions including the concentration of metallic salts, reductant and complex agent on Cu-Sn-Zn alloy were studied in details. The stability to bear color changes and corrosion resistance of Cu-Sn-Zn film layer were studied through air-exposure experiment and electrochemical analyses test respectively. The results show that the performances of Cu-Sn-Zn film layer are obviously superior to brass matrix. By use of SEM,EDS and XRD, the morphology, microstructure and chemical composition were investigated. The results show that complex agent can increase the content of Sn and Zn, improve the evenness and compactness and decrease needle holes, therefore the properties of electroless plating layer such as the stability to bear color changes and corrosion resistance are improved remarkably. The probable mechanism of complex agent was discussed.展开更多
A direct electroless Ni-P plating treatment was applied to AZ91D magnesium alloy for improving its corrosion resistance and wear resistance. Corrosion resistance of the Ni-P coatings was evaluated by potentiodynamic p...A direct electroless Ni-P plating treatment was applied to AZ91D magnesium alloy for improving its corrosion resistance and wear resistance. Corrosion resistance of the Ni-P coatings was evaluated by potentiodynamic polarization and immersing experiments in 3.5% NaCl solution. The wear resistance of the coatings was investigated by the wear track and the mass change after ball-on-disk experiment. The results show that corrosion resistance and wear resistance of the AZ91D alloy are greatly improved after direct electroless Ni-P plating. No discoloration is noticed until 4 d of immersion in 3.5% NaCl solution. Potentiodynamic polarization experiments show that the free corrosion potential of magnesium alloy is shifted from -1 500 mV to -250 mV and passivation occurs at 1 350 mV after direct electroless plating. The friction coefficients and wear rates of Ni-P coating and Ni-P coating after tempering are 0.10-0.351, 9.038×10-3 mm3/m and 0.13-0.177, 3.056×10-4 mm3/m, respectively, at a load of 1.5 N with dry sliding. Although minor hurt on corrosion resistance was caused, significant improvement of wear resistance was obtained after tempering treatment of the coating.展开更多
Ni-W-P coatings were deposited on the surface of glass fibers by the electroless plating process. The bath was very stable through the palladium salt test. There was no phenomenon of peeling and blistering on the surf...Ni-W-P coatings were deposited on the surface of glass fibers by the electroless plating process. The bath was very stable through the palladium salt test. There was no phenomenon of peeling and blistering on the surface of the Ni-W-P alloy glass fibers in the thermal shock test. It showed that the deposit had high impact strength and good adhesion. The morphology of the coatings was observed by scanning electron microscope (SEM). The elements and their contents were tested and analyzed by energy dispersion spectrometer (EDS). The tungsten content reached up to 12.1 wt.%. The effects of the concentrations of NiSO4, Na2WO4, and NaH2PO2.H20 on the conductivity of the coatings were studied. The resistivity of the Ni-W-P alloy glass fibers reached 7.39 × 10^-3 Ωcm. The alloy coatings on glass fibers were analyzed by XRD. The results indicated that the deposit had an amorphous structure and good heat stability. The suitable work temperature range was lower than 190℃. Finally, the electromagnetic parameters of the Ni-W-P alloy glass fibers were tested and analyzed primarily. The magnetic loss reached 0.04023 and the dielectric loss reached -5.80239. The plated alloy is a kind of soft magnetic material.展开更多
A mechanically assisted electroless barrel-plating Ni-P was carried out in a rolling drum containing Mg alloy specimens and ceramic balls, which was submerged in a bath containing electroless plating solution deposite...A mechanically assisted electroless barrel-plating Ni-P was carried out in a rolling drum containing Mg alloy specimens and ceramic balls, which was submerged in a bath containing electroless plating solution deposited by this novel technique have a It is demonstrated that the Ni-P coatings crystallized Ni-P solid solution structure, showing fine-grains, higher hardness, and higher corrosion resistance compared with the conventional electroless plated amorphous Ni-P coatings. After heat treatment at 400 ℃ for 1 h, the structure of such Ni-P coatings were transformed to a structure with Ni-Ni3P double phases, and cracks in these coatings could not be observed, whereas cracks appeared seriously in the conventional electroless plated Ni-P coating after same heat treatment. Therefore, both hardness and corrosion resistance of these Ni-P coatings can be improved further by heat treatment. All of these beneficial effects can be attributed to the role of mechanical attrition during the mechanically assisted electroless barrel-plating process.展开更多
Base on the analysis for the corrosion mechanism of the Mg alloys,the technology of Ni-P directly electroless plating on the Mg-10Li-1Zn alloys was studied.The effects of the pre-treatment on the morphologies of subst...Base on the analysis for the corrosion mechanism of the Mg alloys,the technology of Ni-P directly electroless plating on the Mg-10Li-1Zn alloys was studied.The effects of the pre-treatment on the morphologies of substrate and plating films were investigated,The result shows that Ni-P electroless plating could be divided two steps:the induction period and the rapid deposition period.The Ni-P film is amorphous structure:A excellent Ni-P coating can be obtained under the optimal parameter.The Ni-P coating can obviously improve the corrosion resistance of Mg alloy in variety environment.展开更多
A novel Ni-P-SiC composite coating was prepared by electroless plating in order to improve the corrosion capacity and wear resistance of AZ91D magnesium alloy.The influence of pH values on deposition rates and propert...A novel Ni-P-SiC composite coating was prepared by electroless plating in order to improve the corrosion capacity and wear resistance of AZ91D magnesium alloy.The influence of pH values on deposition rates and properties of the coatings was studied.The microstructure and phase structure of the Ni-P-SiC coatings were analyzed by scanning electron microscopy(SEM)and X-ray diffractometry(XRD).The corrosion and wear resistance performances of the coatings were also investigated through electrochemical technique and pin-on-disk tribometer,respectively.The results indicate that the composite coating is composed of Ni, P and SiC.It exhibits an amorphous structure and good adhesion to the substrate.The coatings have higher open circuit potential than that of the substrate.The composite coating obtained at pH value of 5.2 possesses optimal integrated properties,which shows similar corrosion resistance and ascendant wear resistance properties to the substrate.展开更多
In order to improve the corrosion resistance of nanoporous coppers(NPCs),the electroless Ni-P coated NPCs were prepared in plating solutions with different pH values(5,8,11) and complexing agent(actic acid,citric acid...In order to improve the corrosion resistance of nanoporous coppers(NPCs),the electroless Ni-P coated NPCs were prepared in plating solutions with different pH values(5,8,11) and complexing agent(actic acid,citric acid).The morphologies and corrosion resistances of the as-prepared samples were investigated.The results showed that the double complexing agent composed of lactic acid and citric acid is relatively suitable for preparing the Ni-P coated NPC with three-dimensional continuous interpenetrating ligament-channel structures,and the uniform ligaments and nanoporous channels could be obtained at pH8.The Ni-P coated NPC showed higher corrosion potentials than NPC in H2SO4,NaOH and NaCl corrosion solutions.展开更多
The electrochemical behavior of Cu-Zn-Al shape memory alloy (SMA) with andwithout electroless plated Ni-P was investigated by electrochemical methods, in artificial Tyrode'ssolution. The results showed that Cu-Zn-...The electrochemical behavior of Cu-Zn-Al shape memory alloy (SMA) with andwithout electroless plated Ni-P was investigated by electrochemical methods, in artificial Tyrode'ssolution. The results showed that Cu-Zn-Al SMA engendered dezincification corrosion in Tyrode'ssolution. The anodic active current densities as well as electrochemical dissolution sensitivity ofthe electroless plated Ni-P Cu-Zn-Al SMA increased with NaCl concentration rising, pH of solutiondecreasing and environmental temperature uprising. X-ray diffraction analysis indicated that aftersurface modification by electroless plated Ni-P, an amorphous plated film formed on the surface ofCu-Zn-Al SMA. This film can effectively isolate matrix metal from corrosion media and significantlyimprove the electrochemical property of Cu-Zn-Al SMA in artificial Tyrode's solution.展开更多
The electroless Ni-P/Ni-W-P duplex coatings were deposited directly on AZ91D magnesium alloy by an acid-sulfate nickel bath.Nickel sulphate and sodium tungstate were used as metal ion sources and sodium hypophosphite ...The electroless Ni-P/Ni-W-P duplex coatings were deposited directly on AZ91D magnesium alloy by an acid-sulfate nickel bath.Nickel sulphate and sodium tungstate were used as metal ion sources and sodium hypophosphite was used as reducing agent.The coating was characterized for its structure,morphologies,microhardness and corrosion properties.The presence of dense and coarse nodules in the duplex coatings was observed by SEM and EDS.Tungsten content in Ni-P/Ni-W-P alloy is about 0.65%(mass fraction) and the phosphorus content is 8.18%(mass fraction).The microhardness of the coatings is 622 VHN.The coating shows good adhesion to the substrate.The results of electrochemical analysis,the porosity and the immersion test show that Ni-P/Ni-W-P duplex coatings possess noble anticorrosion properties to protect the AZ91D magnesium alloy.展开更多
基金Project(04JJ40036)Supported by the Natural Science Foundation of Hunan Province, China
文摘Cu-Sn-Zn ternary alloy layer with 10 μm thickness was prepared through electroless plating method. The influences of process conditions including the concentration of metallic salts, reductant and complex agent on Cu-Sn-Zn alloy were studied in details. The stability to bear color changes and corrosion resistance of Cu-Sn-Zn film layer were studied through air-exposure experiment and electrochemical analyses test respectively. The results show that the performances of Cu-Sn-Zn film layer are obviously superior to brass matrix. By use of SEM,EDS and XRD, the morphology, microstructure and chemical composition were investigated. The results show that complex agent can increase the content of Sn and Zn, improve the evenness and compactness and decrease needle holes, therefore the properties of electroless plating layer such as the stability to bear color changes and corrosion resistance are improved remarkably. The probable mechanism of complex agent was discussed.
基金Project(2006031117-04) supported by Tackling Key Science and Technology of Shanxi Province, ChinaProject(07010763) supported by Academic Innovation of Taiyuan City, China
文摘A direct electroless Ni-P plating treatment was applied to AZ91D magnesium alloy for improving its corrosion resistance and wear resistance. Corrosion resistance of the Ni-P coatings was evaluated by potentiodynamic polarization and immersing experiments in 3.5% NaCl solution. The wear resistance of the coatings was investigated by the wear track and the mass change after ball-on-disk experiment. The results show that corrosion resistance and wear resistance of the AZ91D alloy are greatly improved after direct electroless Ni-P plating. No discoloration is noticed until 4 d of immersion in 3.5% NaCl solution. Potentiodynamic polarization experiments show that the free corrosion potential of magnesium alloy is shifted from -1 500 mV to -250 mV and passivation occurs at 1 350 mV after direct electroless plating. The friction coefficients and wear rates of Ni-P coating and Ni-P coating after tempering are 0.10-0.351, 9.038×10-3 mm3/m and 0.13-0.177, 3.056×10-4 mm3/m, respectively, at a load of 1.5 N with dry sliding. Although minor hurt on corrosion resistance was caused, significant improvement of wear resistance was obtained after tempering treatment of the coating.
基金The project was financially supported by The Space Foundation of Supporting-Technology of China (No. 2002EK1803)the Graduate Starting Seed Fund of Northwestern Polytechnical University (No. W016663)
文摘Ni-W-P coatings were deposited on the surface of glass fibers by the electroless plating process. The bath was very stable through the palladium salt test. There was no phenomenon of peeling and blistering on the surface of the Ni-W-P alloy glass fibers in the thermal shock test. It showed that the deposit had high impact strength and good adhesion. The morphology of the coatings was observed by scanning electron microscope (SEM). The elements and their contents were tested and analyzed by energy dispersion spectrometer (EDS). The tungsten content reached up to 12.1 wt.%. The effects of the concentrations of NiSO4, Na2WO4, and NaH2PO2.H20 on the conductivity of the coatings were studied. The resistivity of the Ni-W-P alloy glass fibers reached 7.39 × 10^-3 Ωcm. The alloy coatings on glass fibers were analyzed by XRD. The results indicated that the deposit had an amorphous structure and good heat stability. The suitable work temperature range was lower than 190℃. Finally, the electromagnetic parameters of the Ni-W-P alloy glass fibers were tested and analyzed primarily. The magnetic loss reached 0.04023 and the dielectric loss reached -5.80239. The plated alloy is a kind of soft magnetic material.
基金supported by the National Natural Science Foundation of China (Grant No.50671006)the National R&D Infrastructure and Facility Development Program of China (2005DKA10400-Z1)
文摘A mechanically assisted electroless barrel-plating Ni-P was carried out in a rolling drum containing Mg alloy specimens and ceramic balls, which was submerged in a bath containing electroless plating solution deposited by this novel technique have a It is demonstrated that the Ni-P coatings crystallized Ni-P solid solution structure, showing fine-grains, higher hardness, and higher corrosion resistance compared with the conventional electroless plated amorphous Ni-P coatings. After heat treatment at 400 ℃ for 1 h, the structure of such Ni-P coatings were transformed to a structure with Ni-Ni3P double phases, and cracks in these coatings could not be observed, whereas cracks appeared seriously in the conventional electroless plated Ni-P coating after same heat treatment. Therefore, both hardness and corrosion resistance of these Ni-P coatings can be improved further by heat treatment. All of these beneficial effects can be attributed to the role of mechanical attrition during the mechanically assisted electroless barrel-plating process.
基金National Hi-Tech Research and Development Program"863"
文摘Base on the analysis for the corrosion mechanism of the Mg alloys,the technology of Ni-P directly electroless plating on the Mg-10Li-1Zn alloys was studied.The effects of the pre-treatment on the morphologies of substrate and plating films were investigated,The result shows that Ni-P electroless plating could be divided two steps:the induction period and the rapid deposition period.The Ni-P film is amorphous structure:A excellent Ni-P coating can be obtained under the optimal parameter.The Ni-P coating can obviously improve the corrosion resistance of Mg alloy in variety environment.
基金Project(KJ070602)supported by Program of Applied Science Foundation of Chongqing Education Committee,ChinaProject(KF0604)supported by the Open Foundation of Key Laboratory of Low Dimensional Materials&Application Technology(Xiangtan University),Ministry of Education,China
文摘A novel Ni-P-SiC composite coating was prepared by electroless plating in order to improve the corrosion capacity and wear resistance of AZ91D magnesium alloy.The influence of pH values on deposition rates and properties of the coatings was studied.The microstructure and phase structure of the Ni-P-SiC coatings were analyzed by scanning electron microscopy(SEM)and X-ray diffractometry(XRD).The corrosion and wear resistance performances of the coatings were also investigated through electrochemical technique and pin-on-disk tribometer,respectively.The results indicate that the composite coating is composed of Ni, P and SiC.It exhibits an amorphous structure and good adhesion to the substrate.The coatings have higher open circuit potential than that of the substrate.The composite coating obtained at pH value of 5.2 possesses optimal integrated properties,which shows similar corrosion resistance and ascendant wear resistance properties to the substrate.
基金supported by the National Natural Science Foundation of China(Grant Nos.51174161,51202191)Scientific and Technological Innovation and Co-ordination Funded by Science and Technology Department of Shaanxi Province,China(Grant No.2012KPCQ01-14)+1 种基金A part of this work was also supported by Natural Science Basic Research Plan in Shaanxi Province of China(Grant No.2012JQ6002)Scientific Research Program Funded by Shaanxi Provincial Education Department(Grant No.12JK0427)
文摘In order to improve the corrosion resistance of nanoporous coppers(NPCs),the electroless Ni-P coated NPCs were prepared in plating solutions with different pH values(5,8,11) and complexing agent(actic acid,citric acid).The morphologies and corrosion resistances of the as-prepared samples were investigated.The results showed that the double complexing agent composed of lactic acid and citric acid is relatively suitable for preparing the Ni-P coated NPC with three-dimensional continuous interpenetrating ligament-channel structures,and the uniform ligaments and nanoporous channels could be obtained at pH8.The Ni-P coated NPC showed higher corrosion potentials than NPC in H2SO4,NaOH and NaCl corrosion solutions.
文摘The electrochemical behavior of Cu-Zn-Al shape memory alloy (SMA) with andwithout electroless plated Ni-P was investigated by electrochemical methods, in artificial Tyrode'ssolution. The results showed that Cu-Zn-Al SMA engendered dezincification corrosion in Tyrode'ssolution. The anodic active current densities as well as electrochemical dissolution sensitivity ofthe electroless plated Ni-P Cu-Zn-Al SMA increased with NaCl concentration rising, pH of solutiondecreasing and environmental temperature uprising. X-ray diffraction analysis indicated that aftersurface modification by electroless plated Ni-P, an amorphous plated film formed on the surface ofCu-Zn-Al SMA. This film can effectively isolate matrix metal from corrosion media and significantlyimprove the electrochemical property of Cu-Zn-Al SMA in artificial Tyrode's solution.
基金Project(2004CB619301)supported by the National Basic Research Program of ChinaProject supported by the"985"Project of JilinUniversity,ChinaProject(2007KZ09)supported by the 2007 Science and Technology Support Plan of Changchun City,China
文摘The electroless Ni-P/Ni-W-P duplex coatings were deposited directly on AZ91D magnesium alloy by an acid-sulfate nickel bath.Nickel sulphate and sodium tungstate were used as metal ion sources and sodium hypophosphite was used as reducing agent.The coating was characterized for its structure,morphologies,microhardness and corrosion properties.The presence of dense and coarse nodules in the duplex coatings was observed by SEM and EDS.Tungsten content in Ni-P/Ni-W-P alloy is about 0.65%(mass fraction) and the phosphorus content is 8.18%(mass fraction).The microhardness of the coatings is 622 VHN.The coating shows good adhesion to the substrate.The results of electrochemical analysis,the porosity and the immersion test show that Ni-P/Ni-W-P duplex coatings possess noble anticorrosion properties to protect the AZ91D magnesium alloy.