Results of measurements of permeability, permittivity and radar absorption properties of composites on basis of carbonyl iron particles R-10 brand are presented in this paper. The calculations and experimental studies...Results of measurements of permeability, permittivity and radar absorption properties of composites on basis of carbonyl iron particles R-10 brand are presented in this paper. The calculations and experimental studies have shown that in the super high frequency (SHF) and extremely high frequency (EHF) ranges on the basis of two-layer structures with different content of carbonyl iron particles can create a radar absorbing coatings with a reflectivity of less than -10 dB over a wide bandwidth from 3.1 to 17.1 GHz and from 27 to 37 GHz. Absorbing properties of composites are saved in terahertz frequency range from 250 to 525 GHz.展开更多
Porous carbon(PC)is a promising electromagnetic(EM)wave absorbing material thanks to its light weight,large specific surface area as well as good dissipating capacity.To further improve its microwave absorbing perform...Porous carbon(PC)is a promising electromagnetic(EM)wave absorbing material thanks to its light weight,large specific surface area as well as good dissipating capacity.To further improve its microwave absorbing performance,silver coated porous carbon(Ag@PC)is synthesized by one-step hydro-thermal synthesis process making use of fir as a biomass formwork.Phase compositions,morphological structure,and microwave absorption capability of the Ag@PC has been explored.Research results show that the metallic Ag was successfully reduced and the particles are evenly distributed inward the pores of the carbon formwork,which accelerates graphitization process of the amorphous carbon.The Ag@PC composite without adding polyvinyl pyrrolidone(PVP)exhibits higher dielectric constant and better EM wave dissipating capability.This is because the larger particles of Ag give rise to higher electric conductivity.After combing with frequency selective surface(FSS),the EM wave absorbing performance is further improved and the frequency region below-10 d B is located in8.20-11.75 GHz,and the minimal reflection loss value is-22.5 dB.This work indicates that incorporating metallic Ag particles and FSS provides a valid way to strengthen EM wave absorbing capacity of PC material.展开更多
For enhancing the electromagnetic wave(EW)attenuation and adsorption,rational constructing and homogeneously distributing bimetallic electromagnetic coupling units in hollow structure is an effective way,but hard to a...For enhancing the electromagnetic wave(EW)attenuation and adsorption,rational constructing and homogeneously distributing bimetallic electromagnetic coupling units in hollow structure is an effective way,but hard to achieve.Herein,a CoNi-doped hybrid zeolite imidazole framework was synthesized as precursor,which was further converted into a hollow CoNi-bimetallic doped molyb-denum carbide sphere(H-CoNi@MoC/NC)through a two-step etching and calcination strategy.At the loading amount of 15 wt%,a strong absorption of minimum reflection loss(RL_(min))of-60.05 dB at 7.2 GHz with the thickness of 3.1 mm and a wide effective ad-sorption bandwidth(EAB)of 3.52 GHz at the thickness of 2.5 mm were achieved,which was far beyond the reported MoC-based metallic hybrids.The crucial synergistic Co-Ni electromagnetic coupling effect in the composite was characterized,not only enhanc-ing the dipolar/interfacial polarization,but also promoting the impedance matching,displaying the optimized EW absorbing perfor-mance.展开更多
Al2O3/TiOe/FeeO3/Yb2O3 composite powder was synthesized via the sol-gel method. The structure, morphology, and ra- dar-absorption properties of the composite powder were characterized by transmission electron microsco...Al2O3/TiOe/FeeO3/Yb2O3 composite powder was synthesized via the sol-gel method. The structure, morphology, and ra- dar-absorption properties of the composite powder were characterized by transmission electron microscopy, X-ray diffraction analysis and RF impedance analysis. The results show that two types of particles exist in the composite powder. One is irregular flakes （100-200 rim） and the other is spherical A1203 particles （smaller than 80 rim）. Electromagnetic wave attenuation is mostly achieved by dielectric loss. The maximum value of the dissipation factor reaches 0.76 （at 15.68 GHz） in the frequency range of 2-18 GHz. The electromagnetic absorption of waves covers 2-18 GHz with the matching thicknesses of 1.5-4.5 mm. The absorption peak shifts to the lower-frequency area with increas- ing matching thickness. The effective absorption hand covers the frequency range of 2.16-9.76 GHz, and the maximum absorption peak reaches -20.18 dB with a matching thickness of 3.5 mm at a frequency of 3.52 GHz.展开更多
文摘Results of measurements of permeability, permittivity and radar absorption properties of composites on basis of carbonyl iron particles R-10 brand are presented in this paper. The calculations and experimental studies have shown that in the super high frequency (SHF) and extremely high frequency (EHF) ranges on the basis of two-layer structures with different content of carbonyl iron particles can create a radar absorbing coatings with a reflectivity of less than -10 dB over a wide bandwidth from 3.1 to 17.1 GHz and from 27 to 37 GHz. Absorbing properties of composites are saved in terahertz frequency range from 250 to 525 GHz.
基金supported by National Natural Science Foundation of China(No.52103361)Shaanxi University Youth Outstanding Talents Support Plan,Scientific and Technological Plan Project of Xi’an Beilin District(No.GX2143)。
文摘Porous carbon(PC)is a promising electromagnetic(EM)wave absorbing material thanks to its light weight,large specific surface area as well as good dissipating capacity.To further improve its microwave absorbing performance,silver coated porous carbon(Ag@PC)is synthesized by one-step hydro-thermal synthesis process making use of fir as a biomass formwork.Phase compositions,morphological structure,and microwave absorption capability of the Ag@PC has been explored.Research results show that the metallic Ag was successfully reduced and the particles are evenly distributed inward the pores of the carbon formwork,which accelerates graphitization process of the amorphous carbon.The Ag@PC composite without adding polyvinyl pyrrolidone(PVP)exhibits higher dielectric constant and better EM wave dissipating capability.This is because the larger particles of Ag give rise to higher electric conductivity.After combing with frequency selective surface(FSS),the EM wave absorbing performance is further improved and the frequency region below-10 d B is located in8.20-11.75 GHz,and the minimal reflection loss value is-22.5 dB.This work indicates that incorporating metallic Ag particles and FSS provides a valid way to strengthen EM wave absorbing capacity of PC material.
基金financially supported by the National Natural Science Foundation of China(22001156,22271178)the Youth Talent Fund of University Association for Science and Technology in Shaanxi,China(20210602)International Cooperation Key Project of Science and Technology Department of Shaanxi,China(2022KWZ-06).
文摘For enhancing the electromagnetic wave(EW)attenuation and adsorption,rational constructing and homogeneously distributing bimetallic electromagnetic coupling units in hollow structure is an effective way,but hard to achieve.Herein,a CoNi-doped hybrid zeolite imidazole framework was synthesized as precursor,which was further converted into a hollow CoNi-bimetallic doped molyb-denum carbide sphere(H-CoNi@MoC/NC)through a two-step etching and calcination strategy.At the loading amount of 15 wt%,a strong absorption of minimum reflection loss(RL_(min))of-60.05 dB at 7.2 GHz with the thickness of 3.1 mm and a wide effective ad-sorption bandwidth(EAB)of 3.52 GHz at the thickness of 2.5 mm were achieved,which was far beyond the reported MoC-based metallic hybrids.The crucial synergistic Co-Ni electromagnetic coupling effect in the composite was characterized,not only enhanc-ing the dipolar/interfacial polarization,but also promoting the impedance matching,displaying the optimized EW absorbing perfor-mance.
基金financially supported by the National Natural Science Foundation of China (No.51471023)the Major State Basic Research Development Program of China (No.2014GB120000)
文摘Al2O3/TiOe/FeeO3/Yb2O3 composite powder was synthesized via the sol-gel method. The structure, morphology, and ra- dar-absorption properties of the composite powder were characterized by transmission electron microscopy, X-ray diffraction analysis and RF impedance analysis. The results show that two types of particles exist in the composite powder. One is irregular flakes （100-200 rim） and the other is spherical A1203 particles （smaller than 80 rim）. Electromagnetic wave attenuation is mostly achieved by dielectric loss. The maximum value of the dissipation factor reaches 0.76 （at 15.68 GHz） in the frequency range of 2-18 GHz. The electromagnetic absorption of waves covers 2-18 GHz with the matching thicknesses of 1.5-4.5 mm. The absorption peak shifts to the lower-frequency area with increas- ing matching thickness. The effective absorption hand covers the frequency range of 2.16-9.76 GHz, and the maximum absorption peak reaches -20.18 dB with a matching thickness of 3.5 mm at a frequency of 3.52 GHz.
