This paper describes technology of the electromagnetic pump made in a hybrid polymer-ceramic technology. The pumping mechanism is realized with a mutual excitation between an electromagnetic coil and a neodymium magne...This paper describes technology of the electromagnetic pump made in a hybrid polymer-ceramic technology. The pumping mechanism is realized with a mutual excitation between an electromagnetic coil and a neodymium magnet bonded to a flexible membrane. A PDMS （poly（dimethylsiloxane）） material was used to manufacture a membrane sufficient for the presented micropump. A fish trap construction is adapted to the ceramic technology. The bonding process of ceramics and polymer, using plasma oxidation method, is described as well. Moreover, a membrane deflection depending on magnet dimensions and applied voltage was measured.展开更多
Pumps with magnet systems constructed on permanent magnets and performed in two manners like two-disk type and the cylindrical rotor type are discussed.First,by way of example we consider the experimental study of dis...Pumps with magnet systems constructed on permanent magnets and performed in two manners like two-disk type and the cylindrical rotor type are discussed.First,by way of example we consider the experimental study of disk pump with straight channel;second,we analyse the results of numerical simulation of cylindrical pump in two cases,namely,of straight and U-bend forms of pump channels.At a high speed of pump rotation when induced magnetic field becomes essential in as against the applied field,i.e.when the skin-effect takes place,the pump characteristics are analyzed.Visualization of physical fields of the pumps is reported.展开更多
Obtaining petroleum at the cost of electrical energy is a common problem in almost all oil fields, and it is mainly caused by low duty radio of induction motor used in beam pumping units. Traditional beam-pumping unit...Obtaining petroleum at the cost of electrical energy is a common problem in almost all oil fields, and it is mainly caused by low duty radio of induction motor used in beam pumping units. Traditional beam-pumping units have many intrinsic disadvantages such as low efficiency, complex transmission devices, poor flexibility, tremendous volume and weight in long stroke, etc.Therefore, a novel direct driven linear electromagnetic pumping unit (EMPU) has been developed by combining oil extraction technology with linear motor technology. The thrust of EMPU matches the changing of suspension center load to improve the system efficiency and cut down the consumption of energy. Based on previous experience, a small-scale prototype was developed and a simulation was conducted with it. Both theoretical analyses and experimental study showed that the problems exiting in beam pumping units can be solved with EMPU system, and this is a new method which can be used to solve high energy waste in oil fields.展开更多
In this paper, a novel liquid metal-based minichannel heat dissipation method was developed for cooling electric devices with high heat flux. A high-performance electromagnetic induction pump driven by rotating perman...In this paper, a novel liquid metal-based minichannel heat dissipation method was developed for cooling electric devices with high heat flux. A high-performance electromagnetic induction pump driven by rotating permanent magnets is designed to achieve a pressure head of 160 kPa and a flow rate of 3.24 L/min, which could enable the liquid metal to remove the waste heat quickly. The liquid metal-based minichannel thermal management system was established and tested experimentally to investigate the pumping capacity and cooling performance. The results show that the liquid metal cooling system can dissipate heat flux up to 242 W/cm2 with keeping the temperature rise of the heat source below 50°C. It could remarkably enhance the cooling performance by increasing the rotating speed of permanent magnets. Moreover, thermal contact resistance has a critical importance for the heat dissipation capacity. The liquid metal thermal grease is introduced to efficiently reduce the thermal contact resistance (a decrease of about 7.77 × 10−3 °C/W). This paper provides a powerful cooling strategy for thermal management of electric devices with large heat power and high heat flux.展开更多
The paper studies specific pumping characteristics of the annular linear pumps with travelling field(ALIP)for liquid sodium.This research represents a preliminary step in the study and development of very large electr...The paper studies specific pumping characteristics of the annular linear pumps with travelling field(ALIP)for liquid sodium.This research represents a preliminary step in the study and development of very large electromagnetic pumps able to provide high flow rates.Since in such cases the magnetic Reynolds number are quite large,it is necessary to take into account the full magnetohydrodynamic interaction between the electromagnetic field and the liquid metal flow inside the pumping channel.The case where the velocity field is uniform in the channel cross section is firstly considered. Then,the coupling between the electromagnetic aspects with the hydrodynamic ones in a 2D axisyrnmetric fmite element model is studied,in order to compare the magnetic convection and the magnetic diffusion.展开更多
文摘This paper describes technology of the electromagnetic pump made in a hybrid polymer-ceramic technology. The pumping mechanism is realized with a mutual excitation between an electromagnetic coil and a neodymium magnet bonded to a flexible membrane. A PDMS （poly（dimethylsiloxane）） material was used to manufacture a membrane sufficient for the presented micropump. A fish trap construction is adapted to the ceramic technology. The bonding process of ceramics and polymer, using plasma oxidation method, is described as well. Moreover, a membrane deflection depending on magnet dimensions and applied voltage was measured.
基金Sponsored by German Research Foundation (Deutsche Forschungsgemeinschaft) in the Framework of the Research Training Group (Graduiertenkolleg) "Lorentz Force Velocimetry and Lorentz Force Eddy Current Testing"
文摘Pumps with magnet systems constructed on permanent magnets and performed in two manners like two-disk type and the cylindrical rotor type are discussed.First,by way of example we consider the experimental study of disk pump with straight channel;second,we analyse the results of numerical simulation of cylindrical pump in two cases,namely,of straight and U-bend forms of pump channels.At a high speed of pump rotation when induced magnetic field becomes essential in as against the applied field,i.e.when the skin-effect takes place,the pump characteristics are analyzed.Visualization of physical fields of the pumps is reported.
文摘Obtaining petroleum at the cost of electrical energy is a common problem in almost all oil fields, and it is mainly caused by low duty radio of induction motor used in beam pumping units. Traditional beam-pumping units have many intrinsic disadvantages such as low efficiency, complex transmission devices, poor flexibility, tremendous volume and weight in long stroke, etc.Therefore, a novel direct driven linear electromagnetic pumping unit (EMPU) has been developed by combining oil extraction technology with linear motor technology. The thrust of EMPU matches the changing of suspension center load to improve the system efficiency and cut down the consumption of energy. Based on previous experience, a small-scale prototype was developed and a simulation was conducted with it. Both theoretical analyses and experimental study showed that the problems exiting in beam pumping units can be solved with EMPU system, and this is a new method which can be used to solve high energy waste in oil fields.
基金This work was supported by the National Natural Science Foundation of China(No.52076213)the 2115 Talent Development Program of China Agricultural University.
文摘In this paper, a novel liquid metal-based minichannel heat dissipation method was developed for cooling electric devices with high heat flux. A high-performance electromagnetic induction pump driven by rotating permanent magnets is designed to achieve a pressure head of 160 kPa and a flow rate of 3.24 L/min, which could enable the liquid metal to remove the waste heat quickly. The liquid metal-based minichannel thermal management system was established and tested experimentally to investigate the pumping capacity and cooling performance. The results show that the liquid metal cooling system can dissipate heat flux up to 242 W/cm2 with keeping the temperature rise of the heat source below 50°C. It could remarkably enhance the cooling performance by increasing the rotating speed of permanent magnets. Moreover, thermal contact resistance has a critical importance for the heat dissipation capacity. The liquid metal thermal grease is introduced to efficiently reduce the thermal contact resistance (a decrease of about 7.77 × 10−3 °C/W). This paper provides a powerful cooling strategy for thermal management of electric devices with large heat power and high heat flux.
文摘The paper studies specific pumping characteristics of the annular linear pumps with travelling field(ALIP)for liquid sodium.This research represents a preliminary step in the study and development of very large electromagnetic pumps able to provide high flow rates.Since in such cases the magnetic Reynolds number are quite large,it is necessary to take into account the full magnetohydrodynamic interaction between the electromagnetic field and the liquid metal flow inside the pumping channel.The case where the velocity field is uniform in the channel cross section is firstly considered. Then,the coupling between the electromagnetic aspects with the hydrodynamic ones in a 2D axisyrnmetric fmite element model is studied,in order to compare the magnetic convection and the magnetic diffusion.
