Inductance-bared electromagnetic tomography (EMT) is a novel industrial process tomographic technique. Exact expressions of the magnetic field distribution in a two-dimensional object space were derived by analyticall...Inductance-bared electromagnetic tomography (EMT) is a novel industrial process tomographic technique. Exact expressions of the magnetic field distribution in a two-dimensional object space were derived by analytically solving the forward problem for a particular two-component pow. The physical mechanisms within the sensor and the detectability limits of the EMT technique were quantitatively analyzed. Direct mathematical expressions for the field sensitivity and the sensitivity maps were established. To a certain extent, mathematical and theoretical bares are given for quantitative design of the sensor, detectability analysis of the EMT technique and image reconstruction of two-component processes based on the linear back-projection algorithm.展开更多
Because of gravitational differentiation of multi-phase fluids, gas-water flow is usually stratified in highly inclined or horizontal gas wells. By using electrode arrays to scan flowing fluids, electromagnetic tomogr...Because of gravitational differentiation of multi-phase fluids, gas-water flow is usually stratified in highly inclined or horizontal gas wells. By using electrode arrays to scan flowing fluids, electromagnetic tomography can identify the flow patterns of mixed fluid from the different electrical properties of gas and water. The responses for different gas-water interface locations were calculated and then physical measurements were undertaken. We compared the results of the numerical simulation with the experimental data, and found that the response characteristics were consistent in the circumstances of uniform physical fields and stratified flows. By analyzing the signal characteristics, it is found that, with the change of the interface location, the response curves showed "steps" whose position and width were decided by the location of fluid interface. The measurement accuracy of this method depended on the vertical distance between adjacent electrodes. The results showed that computer simulation can simulate the measurement of the electromagnetic tomography accurately, so the physical experiment can be replaced.展开更多
A novel electromagnetic tomography(EMT)system for defect detection of high-speed rail wheel is proposed,which differs from traditional electromagnetic tomography systems in its spatial arrangements of coils.A U-shaped...A novel electromagnetic tomography(EMT)system for defect detection of high-speed rail wheel is proposed,which differs from traditional electromagnetic tomography systems in its spatial arrangements of coils.A U-shaped sensor array was designed,and then a simulation model was built with the low frequency electromagnetic simulation software.Three different algorithms were applied to perform image reconstruction,therefore the defects can be detected from the reconstructed images.Based on the simulation results,an experimental system was built and image reconstruction were performed with the measured data.The reconstructed images obtained both from numerical simulation and experimental system indicated the locations of the defects of the wheel,which verified the feasibility of the EMT system and revealed its good application prospect in the future.展开更多
Electromagnetic Computer Tomography (ECT) is a method to probe the interior of an inhomogeneous medium via surface measurement in a non-linear way. Due to the great differences in conductivity and permittivity betwe...Electromagnetic Computer Tomography (ECT) is a method to probe the interior of an inhomogeneous medium via surface measurement in a non-linear way. Due to the great differences in conductivity and permittivity between oil and water in the well, Electromagnetic Tomography Well Logging (ETWL), a new flow imaging measurement system, is proposed to describe the distribution and movement of oil/water two-phase flow in the well by scanning the detected region and applying a suitable data processing algorithm. The results of the numerical simulation and physical modeling show that the system could provide a clear image of the flow profile.展开更多
This article reviews the constructs of stress, appraisal, coping, according to a transactional perspective, and executive function, and presents a stress control rating scale (ECOSTRESS), which design is founded in th...This article reviews the constructs of stress, appraisal, coping, according to a transactional perspective, and executive function, and presents a stress control rating scale (ECOSTRESS), which design is founded in these constructs. This psychometric tool is useful in the assessment of cognitive control of stress, correlated with the function of dorsolateral prefrontal cortex. It has been validated for its use in the assessment of Portuguese people in situations of stress related to unemployment and economic insufficiency. Also, within the context of the cognitive control of stress, it is highlighted the usefulness of low resolution brain electromagnetic tomography (LORETA).展开更多
In crosswell observation of electromagnetic tomography, now there is no feasible way to calibrate the in situ radiation constant, while the effect of induced wave field always exists in observational data. Therefor...In crosswell observation of electromagnetic tomography, now there is no feasible way to calibrate the in situ radiation constant, while the effect of induced wave field always exists in observational data. Therefore the absorption coefficient obtained by a common used image reconstruction method is only a relative value. The consistency of tomograms in linked profiles inevitably is affected seriously. An improved equation involving the effect of induced wave field and an alternative tracing method to calculate the in situ radiation constant is proposed in the present paper. Based on the results from a series of parameter calibration performed in water and the experiments with rock samples, the standard meter readings of borehole electromagnetic systems, types EW—1 and JWQ—3, are accurately defined here. Additionally, frequency reduction and boundary smoothing of linked profiles are discussed. In research on groundwater prospecting in Tanggongta, Inner Mongolia, we used the above mentioned method and obtained the tomograms of linked profiles with good consistency. The absorption coefficient in the tomogram are not only reasonable and reliable, but also coincided with the result from rock parameter measurement. The depth, extension direction and water bearing structure of two aquifers were well detected. This result correctly guides hydrologic drilling there.展开更多
The construction of modern livable cities faces challenges in karst areas,including ground collapse and engineering problems.Wuhan,with a population of 13.74×10^(6) and approximately 1161 km^(2)of soluble rocks i...The construction of modern livable cities faces challenges in karst areas,including ground collapse and engineering problems.Wuhan,with a population of 13.74×10^(6) and approximately 1161 km^(2)of soluble rocks in the urban area of 8569.15 km^(2),predominantly consists of concealed karst areas where occasional ground collapse events occur,posing significant threats to underground engineering projects.To address these challenges,a comprehensive geological survey was conducted in Wuhan,focusing on major karstrelated issues.Geophysical methods offer advantages over drilling in detecting concealed karst areas due to their efficiency,non-destructiveness,and flexibility.This paper reviewed the karst geological characteristics in Wuhan and the geophysical exploration methods for karst,selected eight effective geophysical methods for field experimentation,evaluated their suitability,and proposed method combinations for different karst scenarios.The results show that different geophysical methods have varying applicability for karst detection in Wuhan,and combining multiple methods enhances detection effectiveness.The specific recommendations for method combinations provided in this study serve as a valuable reference for karst detection in Wuhan.展开更多
文摘Inductance-bared electromagnetic tomography (EMT) is a novel industrial process tomographic technique. Exact expressions of the magnetic field distribution in a two-dimensional object space were derived by analytically solving the forward problem for a particular two-component pow. The physical mechanisms within the sensor and the detectability limits of the EMT technique were quantitatively analyzed. Direct mathematical expressions for the field sensitivity and the sensitivity maps were established. To a certain extent, mathematical and theoretical bares are given for quantitative design of the sensor, detectability analysis of the EMT technique and image reconstruction of two-component processes based on the linear back-projection algorithm.
文摘Because of gravitational differentiation of multi-phase fluids, gas-water flow is usually stratified in highly inclined or horizontal gas wells. By using electrode arrays to scan flowing fluids, electromagnetic tomography can identify the flow patterns of mixed fluid from the different electrical properties of gas and water. The responses for different gas-water interface locations were calculated and then physical measurements were undertaken. We compared the results of the numerical simulation with the experimental data, and found that the response characteristics were consistent in the circumstances of uniform physical fields and stratified flows. By analyzing the signal characteristics, it is found that, with the change of the interface location, the response curves showed "steps" whose position and width were decided by the location of fluid interface. The measurement accuracy of this method depended on the vertical distance between adjacent electrodes. The results showed that computer simulation can simulate the measurement of the electromagnetic tomography accurately, so the physical experiment can be replaced.
基金Supported by the National Natural Science Foundation of China(61771041)。
文摘A novel electromagnetic tomography(EMT)system for defect detection of high-speed rail wheel is proposed,which differs from traditional electromagnetic tomography systems in its spatial arrangements of coils.A U-shaped sensor array was designed,and then a simulation model was built with the low frequency electromagnetic simulation software.Three different algorithms were applied to perform image reconstruction,therefore the defects can be detected from the reconstructed images.Based on the simulation results,an experimental system was built and image reconstruction were performed with the measured data.The reconstructed images obtained both from numerical simulation and experimental system indicated the locations of the defects of the wheel,which verified the feasibility of the EMT system and revealed its good application prospect in the future.
基金This work was supported by the National Natural Science Foundation of China(60472019).
文摘Electromagnetic Computer Tomography (ECT) is a method to probe the interior of an inhomogeneous medium via surface measurement in a non-linear way. Due to the great differences in conductivity and permittivity between oil and water in the well, Electromagnetic Tomography Well Logging (ETWL), a new flow imaging measurement system, is proposed to describe the distribution and movement of oil/water two-phase flow in the well by scanning the detected region and applying a suitable data processing algorithm. The results of the numerical simulation and physical modeling show that the system could provide a clear image of the flow profile.
文摘This article reviews the constructs of stress, appraisal, coping, according to a transactional perspective, and executive function, and presents a stress control rating scale (ECOSTRESS), which design is founded in these constructs. This psychometric tool is useful in the assessment of cognitive control of stress, correlated with the function of dorsolateral prefrontal cortex. It has been validated for its use in the assessment of Portuguese people in situations of stress related to unemployment and economic insufficiency. Also, within the context of the cognitive control of stress, it is highlighted the usefulness of low resolution brain electromagnetic tomography (LORETA).
文摘In crosswell observation of electromagnetic tomography, now there is no feasible way to calibrate the in situ radiation constant, while the effect of induced wave field always exists in observational data. Therefore the absorption coefficient obtained by a common used image reconstruction method is only a relative value. The consistency of tomograms in linked profiles inevitably is affected seriously. An improved equation involving the effect of induced wave field and an alternative tracing method to calculate the in situ radiation constant is proposed in the present paper. Based on the results from a series of parameter calibration performed in water and the experiments with rock samples, the standard meter readings of borehole electromagnetic systems, types EW—1 and JWQ—3, are accurately defined here. Additionally, frequency reduction and boundary smoothing of linked profiles are discussed. In research on groundwater prospecting in Tanggongta, Inner Mongolia, we used the above mentioned method and obtained the tomograms of linked profiles with good consistency. The absorption coefficient in the tomogram are not only reasonable and reliable, but also coincided with the result from rock parameter measurement. The depth, extension direction and water bearing structure of two aquifers were well detected. This result correctly guides hydrologic drilling there.
基金jointly supported by the project of Chinese National Natural Science Foundation(42107485)National Key R&D Program(2020YFC1512400,2018YFC800804)China Geological Survey(DD20190282,DD20221734,and DD20230323)。
文摘The construction of modern livable cities faces challenges in karst areas,including ground collapse and engineering problems.Wuhan,with a population of 13.74×10^(6) and approximately 1161 km^(2)of soluble rocks in the urban area of 8569.15 km^(2),predominantly consists of concealed karst areas where occasional ground collapse events occur,posing significant threats to underground engineering projects.To address these challenges,a comprehensive geological survey was conducted in Wuhan,focusing on major karstrelated issues.Geophysical methods offer advantages over drilling in detecting concealed karst areas due to their efficiency,non-destructiveness,and flexibility.This paper reviewed the karst geological characteristics in Wuhan and the geophysical exploration methods for karst,selected eight effective geophysical methods for field experimentation,evaluated their suitability,and proposed method combinations for different karst scenarios.The results show that different geophysical methods have varying applicability for karst detection in Wuhan,and combining multiple methods enhances detection effectiveness.The specific recommendations for method combinations provided in this study serve as a valuable reference for karst detection in Wuhan.