To realize the efficient transient simulation of a grid-connected power generation system based on multiple inverters, this paper proposes a hybrid simulation method integrating the models of electromagnetic transient...To realize the efficient transient simulation of a grid-connected power generation system based on multiple inverters, this paper proposes a hybrid simulation method integrating the models of electromagnetic transient and dynamic phasors. Based on a demonstration of the concepts and properties of dynamic phasors, the models of single-phase and three-phase inverters described by dynamic phasors are established first. Considering the numerical compatibility problem between dynamic phasors and instantaneous values, an interface scheme between dynamic phasors and instantaneous values is designed, and the efficiency and precision differences of various transformation methods are compared in detail.Finally, by utilizing MATLAB/Simulink, a hybrid simulation platform of a multi-inverter grid-connected system is built, and the efficiency and accuracy of the hybrid simulation are validated via comparison with the full electromagnetic transient simulation.展开更多
In order to effectively imitate the dynamic operation characteristics of the HVDC （high voltage direct current） power transmission system at a real ±500kV HVDC transmission project, the electromechanical-electr...In order to effectively imitate the dynamic operation characteristics of the HVDC （high voltage direct current） power transmission system at a real ±500kV HVDC transmission project, the electromechanical-electromagnetic transient hybrid simulation was carried out based on advanced digital power system simulator （ADPSS）. In the simulation analysis, the built hybrid model＇s dynamic response outputs under three different fault conditions are considered, and by comparing with the selected fault recording waveforms, the validities of the simulation waveforms are estimated qualitatively. It can be ascertained that the hybrid simulation model has the ability to describe the HVDC system＇s dynamic change trends well under some special fault conditions.展开更多
The main goal of this paper is to study the characteristics of regression rate of solid grain during thrust regulation process. For this purpose, an unsteady numerical model of regression rate is established. Gas–sol...The main goal of this paper is to study the characteristics of regression rate of solid grain during thrust regulation process. For this purpose, an unsteady numerical model of regression rate is established. Gas–solid coupling is considered between the solid grain surface and combustion gas.Dynamic mesh is used to simulate the regression process of the solid fuel surface. Based on this model, numerical simulations on a H2O2/HTPB（hydroxyl-terminated polybutadiene） hybrid motor have been performed in the flow control process. The simulation results show that under the step change of the oxidizer mass flow rate condition, the regression rate cannot reach a stable value instantly because the flow field requires a short time period to adjust. The regression rate increases with the linear gain of oxidizer mass flow rate, and has a higher slope than the relative inlet function of oxidizer flow rate. A shorter regulation time can cause a higher regression rate during regulation process. The results also show that transient calculation can better simulate the instantaneous regression rate in the operation process.展开更多
为深入分析双馈型风力发电机组的动态响应,基于双馈风机的运行原理,建立了双馈风机的电磁暂态模型,并进行了电磁暂态–机电暂态混合仿真研究。在自主开发的大型电力系统分析软件包混合仿真平台(power system department-power system mo...为深入分析双馈型风力发电机组的动态响应,基于双馈风机的运行原理,建立了双馈风机的电磁暂态模型,并进行了电磁暂态–机电暂态混合仿真研究。在自主开发的大型电力系统分析软件包混合仿真平台(power system department-power system model,PSD-PSModel)中实现了双馈风机的混合仿真功能,建立了双馈风机的基本模型框架。采用单台机等值模拟风电场,并利用IEEE 14节点算例进行了详细的仿真研究,分析了其控制策略和暂态过程中的动态响应。便于今后与风机制造厂家合作建立实际风机的详细电磁暂态模型,为深化研究风电机组对电网稳定的影响提了供有力的技术支持。展开更多
提出了基于实时数字仿真器(real time digital simulator,RTDS)的电磁–机电暂态混合实时仿真方法。在RTDS/CBuilder环境下,采用多线程和双链表稀疏矩阵技术开发了实时机电暂态仿真程序。提出了电磁和机电侧接口等值电路模型,并将RTDS...提出了基于实时数字仿真器(real time digital simulator,RTDS)的电磁–机电暂态混合实时仿真方法。在RTDS/CBuilder环境下,采用多线程和双链表稀疏矩阵技术开发了实时机电暂态仿真程序。提出了电磁和机电侧接口等值电路模型,并将RTDS电磁模型与实时机电暂态程序进行了连接,建立了混合实时仿真平台。该平台可以在详细分析含直流输电局部电网的同时,又能较准确地考虑交流系统对暂态稳定的影响。仿真算例证明了所提混合实时仿真方法的正确性。展开更多
基金supported by the State Grid Science and Technology Project (grant no. KJ2021-069)。
文摘To realize the efficient transient simulation of a grid-connected power generation system based on multiple inverters, this paper proposes a hybrid simulation method integrating the models of electromagnetic transient and dynamic phasors. Based on a demonstration of the concepts and properties of dynamic phasors, the models of single-phase and three-phase inverters described by dynamic phasors are established first. Considering the numerical compatibility problem between dynamic phasors and instantaneous values, an interface scheme between dynamic phasors and instantaneous values is designed, and the efficiency and precision differences of various transformation methods are compared in detail.Finally, by utilizing MATLAB/Simulink, a hybrid simulation platform of a multi-inverter grid-connected system is built, and the efficiency and accuracy of the hybrid simulation are validated via comparison with the full electromagnetic transient simulation.
基金supported by the General Program of Chinese Postdoctoral Science Foundation under Grant No.2012M511595
文摘In order to effectively imitate the dynamic operation characteristics of the HVDC （high voltage direct current） power transmission system at a real ±500kV HVDC transmission project, the electromechanical-electromagnetic transient hybrid simulation was carried out based on advanced digital power system simulator （ADPSS）. In the simulation analysis, the built hybrid model＇s dynamic response outputs under three different fault conditions are considered, and by comparing with the selected fault recording waveforms, the validities of the simulation waveforms are estimated qualitatively. It can be ascertained that the hybrid simulation model has the ability to describe the HVDC system＇s dynamic change trends well under some special fault conditions.
基金co-supported by the Innovation Foundation of Beihang University for Ph.D. Graduatesthe National Natural Science Foundation of China (No. 51206007)
文摘The main goal of this paper is to study the characteristics of regression rate of solid grain during thrust regulation process. For this purpose, an unsteady numerical model of regression rate is established. Gas–solid coupling is considered between the solid grain surface and combustion gas.Dynamic mesh is used to simulate the regression process of the solid fuel surface. Based on this model, numerical simulations on a H2O2/HTPB（hydroxyl-terminated polybutadiene） hybrid motor have been performed in the flow control process. The simulation results show that under the step change of the oxidizer mass flow rate condition, the regression rate cannot reach a stable value instantly because the flow field requires a short time period to adjust. The regression rate increases with the linear gain of oxidizer mass flow rate, and has a higher slope than the relative inlet function of oxidizer flow rate. A shorter regulation time can cause a higher regression rate during regulation process. The results also show that transient calculation can better simulate the instantaneous regression rate in the operation process.
文摘为深入分析双馈型风力发电机组的动态响应,基于双馈风机的运行原理,建立了双馈风机的电磁暂态模型,并进行了电磁暂态–机电暂态混合仿真研究。在自主开发的大型电力系统分析软件包混合仿真平台(power system department-power system model,PSD-PSModel)中实现了双馈风机的混合仿真功能,建立了双馈风机的基本模型框架。采用单台机等值模拟风电场,并利用IEEE 14节点算例进行了详细的仿真研究,分析了其控制策略和暂态过程中的动态响应。便于今后与风机制造厂家合作建立实际风机的详细电磁暂态模型,为深化研究风电机组对电网稳定的影响提了供有力的技术支持。
文摘提出了基于实时数字仿真器(real time digital simulator,RTDS)的电磁–机电暂态混合实时仿真方法。在RTDS/CBuilder环境下,采用多线程和双链表稀疏矩阵技术开发了实时机电暂态仿真程序。提出了电磁和机电侧接口等值电路模型,并将RTDS电磁模型与实时机电暂态程序进行了连接,建立了混合实时仿真平台。该平台可以在详细分析含直流输电局部电网的同时,又能较准确地考虑交流系统对暂态稳定的影响。仿真算例证明了所提混合实时仿真方法的正确性。
