In this study,the effects of hybridizing micron-sized titanium particles with nano-sized boron carbide particles on the microstructural and mechanical properties of Mg-Ti composite were investigated.Microstructural ch...In this study,the effects of hybridizing micron-sized titanium particles with nano-sized boron carbide particles on the microstructural and mechanical properties of Mg-Ti composite were investigated.Microstructural characterization revealed grain refinement attributed to the presence of uniformly distributed micro-Ti particles embedded with nano-B_(4)C particulates.Electron back scattered diffraction(EBSD)analyses of the Mg-(Ti+B_(4)C)BM hybrid composite showed relatively more localized recrystallized grains and lesser tensile twin fraction,when compared to Mg-Ti.The evaluation of mechanical properties indicated that the best combination of strength and ductility was observed in the Mg-(Ti+B_(4)C)BM hybrid composite.The superior properties of the Mg-(Ti+B_(4)C)BM hybrid composite when compared to Mg-Ti can be attributed to the presence of nano-reinforcement,the uniform distribution of the hybridized particles and the better interfacial bonding between the matrix and the reinforcement particles achieved by nano-B_(4)C addition.展开更多
The microstructure and misorientation of ultrathin hot strip were analyzed by CSP technology using electron back scattered diffraction (EBSD) method and Autoforge finite element program. The experimental results showe...The microstructure and misorientation of ultrathin hot strip were analyzed by CSP technology using electron back scattered diffraction (EBSD) method and Autoforge finite element program. The experimental results showed that the finishing hot rolling microstructures were the mixture of recrystallized and deformed austenite. After phase transformation, ferrite grains embody substructures and dislocations, leading to the high strength and relatively low elongation rate of the ultrathin hot strip. The FEM simulation of strain mode and distribution in deformation area has been fulfilled. The simulation results are in good agreement with the theoretical analysis and experimental results.展开更多
The recrystallization behavior of 98.5% cold rolled high purity aluminum foils annealed at 300 ℃ was investigated,and the evolution of the microstructures was followed by electron back scattered diffraction(EBSD).The...The recrystallization behavior of 98.5% cold rolled high purity aluminum foils annealed at 300 ℃ was investigated,and the evolution of the microstructures was followed by electron back scattered diffraction(EBSD).The results show that the recrystallization process of the high purity aluminum foils at 300 ℃ is a mixture of discontinuous-and continuous-recrystallization.The orientations of the recrystallization nuclei include not only the cube orientation,but also other orientations such as some near deformation texture components which are the results of strong recovery process.However,such continuously recrystallized grains are usually associated with relatively high free energy,so they would be consumed by the discontinuously-recrystallized grains(cube-oriented grains)in subsequent annealing.On the other hand,the pattern quality index of recrystallized grains shows dependence on the crystal orientation which might introduce some errors into evaluating volume fraction of recrystallization by integrating pattern quality index of EBSD.展开更多
文摘In this study,the effects of hybridizing micron-sized titanium particles with nano-sized boron carbide particles on the microstructural and mechanical properties of Mg-Ti composite were investigated.Microstructural characterization revealed grain refinement attributed to the presence of uniformly distributed micro-Ti particles embedded with nano-B_(4)C particulates.Electron back scattered diffraction(EBSD)analyses of the Mg-(Ti+B_(4)C)BM hybrid composite showed relatively more localized recrystallized grains and lesser tensile twin fraction,when compared to Mg-Ti.The evaluation of mechanical properties indicated that the best combination of strength and ductility was observed in the Mg-(Ti+B_(4)C)BM hybrid composite.The superior properties of the Mg-(Ti+B_(4)C)BM hybrid composite when compared to Mg-Ti can be attributed to the presence of nano-reinforcement,the uniform distribution of the hybridized particles and the better interfacial bonding between the matrix and the reinforcement particles achieved by nano-B_(4)C addition.
基金This research is supported by the State Foundation for Key Projects, Fundamental Research on New Generation of Steels (No.G1998061500)
文摘The microstructure and misorientation of ultrathin hot strip were analyzed by CSP technology using electron back scattered diffraction (EBSD) method and Autoforge finite element program. The experimental results showed that the finishing hot rolling microstructures were the mixture of recrystallized and deformed austenite. After phase transformation, ferrite grains embody substructures and dislocations, leading to the high strength and relatively low elongation rate of the ultrathin hot strip. The FEM simulation of strain mode and distribution in deformation area has been fulfilled. The simulation results are in good agreement with the theoretical analysis and experimental results.
基金Project(2004053304) supported by the PhD Program Foundation of Education Ministry of China
文摘The recrystallization behavior of 98.5% cold rolled high purity aluminum foils annealed at 300 ℃ was investigated,and the evolution of the microstructures was followed by electron back scattered diffraction(EBSD).The results show that the recrystallization process of the high purity aluminum foils at 300 ℃ is a mixture of discontinuous-and continuous-recrystallization.The orientations of the recrystallization nuclei include not only the cube orientation,but also other orientations such as some near deformation texture components which are the results of strong recovery process.However,such continuously recrystallized grains are usually associated with relatively high free energy,so they would be consumed by the discontinuously-recrystallized grains(cube-oriented grains)in subsequent annealing.On the other hand,the pattern quality index of recrystallized grains shows dependence on the crystal orientation which might introduce some errors into evaluating volume fraction of recrystallization by integrating pattern quality index of EBSD.
