Images of triple gas electron multiplier with pixel-pads

Testing of a triple gas electron multiplier （GEM） with pixel-pads is described. Images by scanning and suspending radioactive sources were obtained by using 96 channels digital data acquisition （DAQ） system which was composed of 96 8×8 mm2 pads and associated electronics channels.

Recent Achievement of Gas Electron Multiplier

Gas electron multiplier (GEM) as a novel gas detector,due to it’s simple structure,high performance,well compatibility etc.,is widely used in high-energy physics,nuclear physics and other fields.In this review,the principle,recent achievements,developments and applications of GEM are mainly described.

Formation of a silicon micropore array of a two-dimension electron multiplier by photo electrochemical etching

A semiconductor PEC etching method is applied to fabricate the n-type silicon deep micropore channel array. In this method, it is important to arrange the direction of the micropore array along the crystal orientation of the Si substrate. Otherwise, serious lateral erosion will happen. The etching process is also relative to the light intensity and HF concentration. 5% HF concentration and 10-15 cm distance between the light source and the silicon wafer are demonstrated to be the best in our experiments. The n-type silicon deep micropore channel array with aperture of 3/2m and aspect ratio of 40-60, whose inner walls are smooth, is finally obtained.

Experimental study of channel electron multiplier

Background Channel electron multiplier(CEM)can be used to measure extremely few charged particles,such as electrons and ions.The CEM is widely used in particle detection,so it is very important to study their performance parameters.Purposes Test and analyze the performance parameters of the CEM,such as resistance,gain,and pulse output for a single entrance photoelectron.Methods The heated tantalum filament is used as a stable and adjustable planar electron source to test the performance of the CEM in the analog mode.The performance parameters of the CEM in the pulse counting mode are tested by using the ultraviolet LED to excite the gold photocathode to generate a single photoelectron.Results and conclusions The gain of the CEM in the analog mode can reach more than 106 and the gain in the pulse counting mode can be two orders of magnitude higher.The curved helical channel has a greater advantage than the ordinary straight channel,which is conducive to weakening the ion feedback phenomenon.

High signal-to-noise ratio sensing with Shack–Hartmann wavefront sensor based on auto gain control of electron multiplying CCD

High signal-to-noise ratio can be achieved with the electron multiplying charge-coupled-device（EMCCD） applied in the Shack–Hartmann wavefront sensor（S–H WFS） in adaptive optics（AO）.However,when the brightness of the target changes in a large scale,the fixed electron multiplying（EM） gain will not be suited to the sensing limitation.Therefore an auto-gain-control method based on the brightness of light-spots array in S–H WFS is proposed in this paper.The control value is the average of the maximum signals of every light spot in an array,which has been demonstrated to be kept stable even under the influence of some noise and turbulence,and sensitive enough to the change of target brightness.A goal value is needed in the control process and it is predetermined based on the characters of EMCCD.Simulations and experiments have demonstrated that this auto-gain-control method is valid and robust,the sensing SNR reaches the maximum for the corresponding signal level,and especially is greatly improved for those dim targets from 6 to 4 magnitude in the visual band.

Monte Carlo simulation of GEM-based for 14 MeV neutron detector

A new concept of neutron detector based on Gas Electron Multiplier(GEM) technology is presented in this paper,in which a novel multi-layer high density polyethylene(HDPE) as neutron-to-proton converter is proposed and studied with Geant4 toolkit for fast 14 MeV neutron.Our preliminary results show that the detection efficiency of the detector with 400 converter units is higher than 2.3% and reconstruction accuracy of the incident neutron position is higher than 2.6%.

Study on the novel neutron-to-proton convertor for improving the detection efficiency of a triple GEM based fast neutron detector

A high-efficiency fast neutron detector prototype based on a triple Gas Electron Multiplier（GEM） detector, which, coupled with a novel multi-layered high-density polyethylene（HDPE） as a neutron-to-proton converter for improving the neutron detection efficiency, is introduced and tested with the Am-Be neutron source in the Institute of Modern Physics（IMP） at Lanzhou in the present work. First, the developed triple GEM detector is tested by measuring its effective gain and energy resolution with55 Fe X-ray source to ensure that it has a good performance.The effective gain and obtained energy resolution is 5.0×104and around 19.2%, respectively. Secondly, the novel multi-layered HDPE converter is coupled with the cathode of the triple GEM detector making it a high-efficiency fast neutron detector. Its effective neutron response is four times higher than that of the traditional single-layered conversion technique when the converter layer number is 38.

Design and construction of a TPC prototype based on GEM detector readout

A time projection chamber （TPC） readout by gas electron multipliers （GEM） detector is a very promising candidate for the central tracking system of ILC （International Linear Collider）. A prototype is designed and set up in our lab and introduced here. The tests during and after the assembly prove that the prototype TPC has been constructed successfully. It is ready for further study.

Discriminating cosmic muons and X-rays based on rise time using a GEM detector

Gas electron multiplier （GEM） detectors have been used in cosmic muon scattering tomography and neutron imaging over the last decade. In this work, a triple GEM device with an effective readout area of 10 cm × 10 cm is developed, and a method of discriminating between cosmic muons and X-rays based on rise time is tested. The energy resolution of the GEM detector is tested by 55Fe ray source to prove the GEM detector has a good performance. Analysis of the complete signal-cycles allows us to get the rise time and pulse heights. The experiment result indicates that cosmic muons and X-rays can be discriminated with an appropriate rise time threshold.

Experimental study on the performance of a single-THGEM gas detector

A kind of thick GEM-like gaseous electron multiplier （THGEM）, which is mechanically an expansion of the GEM with its various dimensions being enlarged, is studied. The leak current of THGEM plates is measured. The effective gain and energy resolution of a single THGEM are studied with a source of 55Fe, and the effective gain of the single THGEM versus the electric field strength in the induction region is investigated. The results show that the leak current of THGEM plates is less than 200 pA. In an atmospheric-pressure standard gas mixture, 8×103 effective gain and about 32% energy resolution can be reached for the single-THGEM detector.

Reconstruction algorithm study of 2D interpolating resistive readout structure

Systematic investigations including both simulation and prototype tests have been done about the interpolating resistive readout structure with GEM （Gaseous Electron Multiplier） detector. From the simulation, we have a good knowledge of the process of charge diffusion on the surface of the readout plane and develop several reconstruction methods to determine the hit position. The total signal duration time of a typical event with the readout structure was about several hundred nanoseconds, which implied an ideal count rate up to 106 Hz. A stable working prototype was designed and fabricated after the simulation. Using 55Fe 5.9 performance of the prototype was examined with flat field image and some special geometry energy resolution of about 17% was obtained. keV X-ray, the image shapes, meanwhile, an

An X-ray imaging device based on a GEM detector with delay-line readout

An X-ray imaging device based on a triple-GEM （Gas Electron Multiplier） detector, a fast delay-line circuit with 700 MHz cut-off frequency and two dimensional readout strips with 150 μm width on the top and 250 μm width on the bottom, is designed and tested. The localization information is derived from the propagation time of the induced signals on the readout strips. This device has a good spatial resolution of 150 μm and works stably at an intensity of 105 Hz/mm2 with 8 keV X-rays.

Spatial resolution optimization in a THGEM-based UV photon detector

Introduction THick Gas Electron Multiplier(THGEM)is considered in many UV photon detector applications.It has the capability of detecting single photon and imaging with high sensitivity.Operating parameters such as choice of gas mixture,pressure,drift field,drift gap,multiplication voltage,induction field and induction gap play an important role in deciding the spatial resolution of the detector.Detailed simulation study enables to optimize the above-mentioned parameters for a given THGEM-based imaging detector and hence to achieve improved performance for the same.Materials and methods Simulation,using ANSYS and Garfield++,starts with the release of primary electrons at random coordinates on the photocathode plane.They are tracked as they pass through the drift gap and THGEM hole till the electron cloud reaches anode plane.Distribution of electron cloud on the anode plane along X and Y axis is plotted in histogram and fitted with Gaussian function to determine spatial resolution.Ar/CO_(2)(70:30)mixture,which shows higher ETE and lower transverse diffusion,is chosen for this simulation study.Conclusion Transverse diffusion has a major impact on both ETE and the spatial resolution.Lower transverse diffusion coefficient is always desired for having better resolution as well as for ETE.It is found from the simulation study that higher gas pressure,lower drift field and induction field,smaller drift and induction gap can provide optimum detection efficiency with the best spatial resolution.The simulation method proposed here can also be extended to X-ray imaging detectors.