On the Gradient of the Electron Pressure in Anti-Parallel Magnetic Reconnection

We first perform a two-dimensional particle-in-cell simulation of anti-parallel magnetic reconnection to verify that in the electron diffusion region the reconnection electric field is mainly balanced by the gradient of the electron pressure. Then, by following typical electron trajectories in the fixed electromagnetic field of anti- parallel reconnection, we calculate the gradient of the electron pressure. We find that the resulted gradient of the electron pressure is equal to the reconnection electric field. This indicates that in the electron diffusion region the reconnection electric field is balanced by the gradient of the electron pressure, which results from the electron nongyrotropic motions. Our result gives a microphysical explanation of the balance between the reconnection electric field and the gradient of the electron pressure.

Novel concept of tailorable magnetic field and electron pressure distribution in a magnetic nozzle for effective space propulsion

Magnetic nozzle appears to be a practical solution for prolonged space missions.For efficient handling of the spaceship,an in-flight solution to customize the thrust from the magnetic nozzle is essential.Here a new concept of three-thick coils system is proposed for tailoring the magnetic field in-flight in accordance with electron pressure distribution.The role of peak position of the pressure and its axial gradient is also uncovered for realizing higher thrust.About three-fold increase in thrust is observed when the electron temperature is raised to w2.5 times of its original value at the exit plane.The set-up is optimized for its best performance and efficient use in the electric space propulsion sector with thrust approaching 5 mN.In particular,this can contribute to the attitude control or the precision pointing of the spacecraft,the technology for removal of space debris and manipulating the ion momentum flux lost to a wall or unsteady laser produced plasma flow in a magnetic nozzle.

Pressure Tolerant Power Electronics： IGBT Gate Driver for Operation in High Pressure Hydrostatic Environment

Abstract： This paper presents results from an on-going research project on pressure tolerant power electronics at SINTEF Energy Research, Norway. The driving force for this research is to enable power electronic components to operate in pressurized dielectric environment. The intended application is the converters for operation down to 3,000 meters ocean depth, primarily for subsea oil and gas processing. The paper focuses on the needed modifications to a general purpose gate driver for IGBT （insulated gate bipolar transistors） that will give pressure tolerance. Adaptations and modifications of the individual driver components are presented.The results from preliminary testing are promising, which shows that the considered adaptations give feasible solutions.

Transparent Electronic Skin Device Based on Microstructured Silver Nanowire Electrode

Transparent, flexible electronic skin holds a wide range of applications in robotics, humanmachine interfaces, artificial intelligence, prosthetics, and health monitoring. Silver nanowire are mechanically flexible and robust, which exhibit great potential in transparent and electricconducting thin film. Herein, we report on a silver-nanowire spray-coating and electrodemicrostructure replicating strategy to construct a transparent, flexible, and sensitive electronic skin device. The electronic skin device shows highly sensitive piezo-capacitance response to pressure. It is found that micropatterning the surface of dielectric layer polyurethane elastomer by replicating from microstructures of natural-existing surfaces such as lotus leaf, silk, and frosted glass can greatly enhance the piezo-capacitance performance of the device. The microstructured pressure sensors based on silver nanowire exhibit good transparency, excellent flexibility, wide pressure detection range （0-150 kPa）, and high sensitivity （1.28 kPa-1）.

From Poincaré’s Electro-Gravific Ether (1905) to Cosmological Background Radiation (3°K, 1965)

It is well known that Einstein published in June 1905 his theory of Special Relativity (SR) without entirely based on space-time Lorentz Transformation (LT) with invariance of Light Velocity. It is much less known that Poincaré published, practically at the same time, a SR also based entirely on LT with also an invariant velocity. However, according to Poincaré, the invariant is not only that of light wave but also that of Gravific Wave in Ether. Poincaré’s Gravific ether exerts also a Gravific pressure, in the same paper, on charged (e) Electron (a “Hole in Ether” according to Poincaré). There are thus two SR: That of Einstein (ESR), without ether and without gravitation, and that of Poincaré (PSR), with Electro-Gravific-Ether. The crucial question arises then: Does “SPECIAL” Poincaré’s (e)-G field fall in the framework of Einstein’s GENERAL Relativity? Our answer is positive. On the basis of Einstein’s equation of gravitation (1917) with Minkowskian Metric (MM) and Zero Constant Cosmological (CC) we rediscover usual Static Vacuum (without charge e of electron). On the other hand with MM and Non-Zero CC, we discover the gravific field of a Cosmological Black Hole (CBH) with density of dark energy compatible with expanding vacuum. Hawking’s Stellar Black Hole (SBH) emits outgoing Black Radiation, whilst Poincaré’s CBH emits (at time zero) incoming Black Radiation. We show that Poincaré’s G-electron involves a (quantum) GRAVITON (on the model of Einstein’s quantum photon) underlying a de Broglie’s G-Wave. There is therefore a Gackground Cosmological model in Poincaré’s basic paper which predicts a density and a temperature of CBR very close to the observed (COBE) values.

Silver nanowire/polymer composite soft conductive film fabricated by large-area compatible coating for flexible pressure sensor array

Soft conductive films composed of a silver nanowire（AgNW） network, a neutral-pH PEDOT：PSS overcoating layer and a polydimethylsiloxane（PDMS） elastomer substrate are fabricated by large area compatible coating processes. The neutral-pH PEDOT：PSS layer is shown to be able to significantly improve the conductivity,stretchability and air stability of the conductive films. The soft conductive films are patterned using a simple maskless patterning approach to fabricate an 8 x 8 flexible pressure sensor array. It is shown that such soft conductive films can help to improve the sensitivity and reduce the signal crosstalk over the pressure sensor array.

Unusually high electron density in an intermolecular non-bonding region:Role of metal substrate

It has been demonstrated that intermolecular interaction,crucial in a plenty of chemical and physical processes,may vary in the presence of metal surface.However,such modification is yet to be quantitatively revealed.Here,we present a systematical density functional theory study on adsorbed bis（para-pyridyl）acetylene（BPPA） tetramer on Au（111） surface.We observed unusually high electron density between two head-to-head N atoms,an intermolecular ＂non-bonded＂ region,in adsorbed BPPA tetramer.This exceptional electron density originates from the wavefunction hybridization of the two compressed N lone-electron-pair states of two BPPA,as squeezed by a newly revealed N-Au-N threecenter bonding.This bond,together with the minor contribution from N...H-C intermolecular hydrogen bonding,shortens the N-N distance from over 4 A to 3.30 A and offers an attractive lateral interacting energy of 0.60 eV,effectively to a surface-confined in-plane pressure.The overlapped non-bonding vvavefunction hybridization arising from the effective pressure induced by the N-Au-N three-center bonding,as not been fully recognized in earlier studies,was manifested in non-contact Atomic Force Microscopy.