ABS is an active safety system which showed a valuable contribution to vehicle safety and stability since it was first introduced. Recently, EVs with in-wheel-motors have drawn increasing attention owing to their grea...ABS is an active safety system which showed a valuable contribution to vehicle safety and stability since it was first introduced. Recently, EVs with in-wheel-motors have drawn increasing attention owing to their greatest advantages. Wheels torques are precisely and swiftly controlled thanks to electric motors and their advanced driving techniques. In this paper, a regenerative-ABS control RABS is proposed for all-in-wheel-motors-drive EVs. The RABS is realized as a pure electronic braking system called brake-by-wire. A coordination strategy is suggested to control RABS compromising three layers. First, wheels slip control takes place, and braking torque is calculated in the higher layer. In the coordinate interlayer, torque is allocated between actuators ensuring maximal energy recovery and vehicle stability. While in the lower layer, actuator control is performed. The RABS effectiveness is validated on a 3-DOF EVSimulink model through two straight-line braking manoeuvres with low and high initial speeds of 50 km/h and 150 km/h, respectively. Both regular and emergency braking manoeuvres are considered with ABS enabled and disabled for comparison. Simulation results showed the high performance of the proposed RABS control in terms of vehicle stability, brake response, stopping distance, and battery re-charging.展开更多
Based on the dynamics of ABS-equipped vehicles during cornering braking, the electronic brake- force distribution （EBD） control methods of ABS-equipped vehicles during cornering braking are proposed. According to th...Based on the dynamics of ABS-equipped vehicles during cornering braking, the electronic brake- force distribution （EBD） control methods of ABS-equipped vehicles during cornering braking are proposed. According to the dynamics and the tire model under tire adhesion limit, the stability acceptance criteria of vehicles during cornering braking are proposed. According to the stability acceptance criteria and the ABS control, the EBD control methods of ABS-equipped vehicles during cornering braking are implemented by adjusting the threshold values of tires slip independently. The vehicle states during cornering braking at two typical initial velocities of the vehicle are analyzed by the EBD control methods, whose results indicate the EBD control methods can improve the braking performances of the vehicle during cornering braking comparing with the ABS control.展开更多
The principle of electric braking system is analyzed and an anti-skid braking system based on the slip rate control is proposed.The fuzzy-PID controller with parameter self-adjustment feature is designed for the anti-...The principle of electric braking system is analyzed and an anti-skid braking system based on the slip rate control is proposed.The fuzzy-PID controller with parameter self-adjustment feature is designed for the anti-skid braking system.The dynamic model of aircraft ground braking is established in the simulation environment of MATLAB/SIMULINK,and simulation results of dry runway and wet runway are presented.The results show that the fuzzy-PID controller with parameter self-adjustment feature for the electric anti-skid braking system keeps working in the state of stability and the brake efficiencies are increased to 93%on dry runway and 82%on wet runway respectively.展开更多
In asymmetric conditions,the movement and loads of left/right wheels or front/back wheels of the aircraft with multi-wheel or four-wheel bogie landing gears are inconsistent.There are few open literatures related to a...In asymmetric conditions,the movement and loads of left/right wheels or front/back wheels of the aircraft with multi-wheel or four-wheel bogie landing gears are inconsistent.There are few open literatures related to anti-skid braking system for multi-wheels due to technology blockade.In China,the research on multi-channel control and non-equilibrium regulation has just started,and the design of multi-channel control system for anti-skid braking,the simulation of asymmetry taxiing under braking are not studied.In this paper,a dynamics model of ground movement for aircraft with four-wheel bogie landing gears is established for braking simulation, considering the six-degree-of-freedom aircraft body and the movement of bogies and wheels.A multi-channel anti-skid braking system is designed for the wheels of the main landing gears with four-wheel bogies.The eight wheels on left and right landing gears are divided into four groups,and each group is controlled via one channel.The cross protection and self-locked protection modules are added between different channels.A multi-channel anti-skid braking system with slip-ratio control or with slip-velocity control is established separately.Based on the aircraft dynamics model,aircraft braking to stop with anti-skid control on dry runway and on wet runway are simulated.The simulation results demonstrate that in asymmetric conditions,added with cross protection and self-locked protection modules,the slip-ratio-controlled braking system can automatically regulate brake torque to avoid deep slipping and correct aircraft course.The proposed research has reference value for improving brake control effect on wet runway.展开更多
文摘ABS is an active safety system which showed a valuable contribution to vehicle safety and stability since it was first introduced. Recently, EVs with in-wheel-motors have drawn increasing attention owing to their greatest advantages. Wheels torques are precisely and swiftly controlled thanks to electric motors and their advanced driving techniques. In this paper, a regenerative-ABS control RABS is proposed for all-in-wheel-motors-drive EVs. The RABS is realized as a pure electronic braking system called brake-by-wire. A coordination strategy is suggested to control RABS compromising three layers. First, wheels slip control takes place, and braking torque is calculated in the higher layer. In the coordinate interlayer, torque is allocated between actuators ensuring maximal energy recovery and vehicle stability. While in the lower layer, actuator control is performed. The RABS effectiveness is validated on a 3-DOF EVSimulink model through two straight-line braking manoeuvres with low and high initial speeds of 50 km/h and 150 km/h, respectively. Both regular and emergency braking manoeuvres are considered with ABS enabled and disabled for comparison. Simulation results showed the high performance of the proposed RABS control in terms of vehicle stability, brake response, stopping distance, and battery re-charging.
基金the National Natural Science Foundation of China (50122155)
文摘Based on the dynamics of ABS-equipped vehicles during cornering braking, the electronic brake- force distribution （EBD） control methods of ABS-equipped vehicles during cornering braking are proposed. According to the dynamics and the tire model under tire adhesion limit, the stability acceptance criteria of vehicles during cornering braking are proposed. According to the stability acceptance criteria and the ABS control, the EBD control methods of ABS-equipped vehicles during cornering braking are implemented by adjusting the threshold values of tires slip independently. The vehicle states during cornering braking at two typical initial velocities of the vehicle are analyzed by the EBD control methods, whose results indicate the EBD control methods can improve the braking performances of the vehicle during cornering braking comparing with the ABS control.
基金Supported by the National Natural Science Foundation of China(51105197,51305198,11372129)the Project Funded by the Priority Academic Program Department of Jiangsu Higher Education Instructions
文摘The principle of electric braking system is analyzed and an anti-skid braking system based on the slip rate control is proposed.The fuzzy-PID controller with parameter self-adjustment feature is designed for the anti-skid braking system.The dynamic model of aircraft ground braking is established in the simulation environment of MATLAB/SIMULINK,and simulation results of dry runway and wet runway are presented.The results show that the fuzzy-PID controller with parameter self-adjustment feature for the electric anti-skid braking system keeps working in the state of stability and the brake efficiencies are increased to 93%on dry runway and 82%on wet runway respectively.
基金supported by National Natural Science Foundation of China (Grant No.51075203)Nanjing University of Aeronautics and Astronautics Research Funding(Grant No.NS2010033)
文摘In asymmetric conditions,the movement and loads of left/right wheels or front/back wheels of the aircraft with multi-wheel or four-wheel bogie landing gears are inconsistent.There are few open literatures related to anti-skid braking system for multi-wheels due to technology blockade.In China,the research on multi-channel control and non-equilibrium regulation has just started,and the design of multi-channel control system for anti-skid braking,the simulation of asymmetry taxiing under braking are not studied.In this paper,a dynamics model of ground movement for aircraft with four-wheel bogie landing gears is established for braking simulation, considering the six-degree-of-freedom aircraft body and the movement of bogies and wheels.A multi-channel anti-skid braking system is designed for the wheels of the main landing gears with four-wheel bogies.The eight wheels on left and right landing gears are divided into four groups,and each group is controlled via one channel.The cross protection and self-locked protection modules are added between different channels.A multi-channel anti-skid braking system with slip-ratio control or with slip-velocity control is established separately.Based on the aircraft dynamics model,aircraft braking to stop with anti-skid control on dry runway and on wet runway are simulated.The simulation results demonstrate that in asymmetric conditions,added with cross protection and self-locked protection modules,the slip-ratio-controlled braking system can automatically regulate brake torque to avoid deep slipping and correct aircraft course.The proposed research has reference value for improving brake control effect on wet runway.
