Performance improvement of AlGaN-based deep ultraviolet light-emitting diodes with double electron blocking layers

The AlGaN-based deep ultraviolet light-emitting diodes（LED） with double electron blocking layers（d-EBLs） on both sides of the active region are investigated theoretically. They possess many excellent performances compared with the conventional structure with only a single electron blocking layer, such as a higher recombination rate, improved light output power and internal quantum efficiency（IQE）. The reasons can be concluded as follows. On the one hand, the weakened electrostatic field within the quantum wells（QWs） enhances the electron–hole spatial overlap in QWs, and therefore increases the probability of radioactive recombination. On the other hand, the added n-AlGaN layer can not only prevent holes from overflowing into the n-side region but also act as another electron source, providing more electrons.

The advantage of blue InGaN multiple quantum wells light-emitting diodes with p-AlInN electron blocking layer

InGaN based light-emitting diodes （LEDs） with different electron blocking layers have been numerically investi- gated using the APSYS simulation software. It is found that the structure with a p-AlInN electron blocking layer showes improved light output power, lower current leakage, and smaller efficiency droop. Based on numerical simulation and analysis, these improvements of the electrical and optical characteristics are mainly attributed to the efficient electron blocking in the InGaN/GaN multiple quantum wells （MQWs）.

Optimized design of high power plasma inverter based on bionics

Through the inspiration of the reliability mechanism of human body, it is obvious that the bionic methods can be used as a reference for the optimized design of high power plasma inverter. On this basis, the high power plasma inverter can be composed of several high power density intelligent power electric building blocks （ IPEBB ） , which are controlled by intelligent controller with the capability of self-management and can be regarded as the cell of the inverter. All of these IPEBB can be controllable and cooperative through distributed communication structure with digital control. This structure can be regarded as the nerve of the inverter. In each IPEBB, the advance mechanical feedback mechanism is adopted to suppress the magnetic bins, over-current protection and gate driving for the high power switches. A 75 kW Prototype constructed by IPEBBs was built to test the performance. Experimental results verify the feasibility of the proposed approach, and the bionic design methods can benefit the optimized design of high power plasma inverter.

Efficient top-emitting white organic light emitting device with an extremely stable chromaticity and viewing-angle

In this paper,we report on the fabrication of a top-emitting electrophosphorescent p-i-n white organic lightemitting diode on the basis of a low-reflectivity Sm/Ag semi-transparent cathode together with a thickness-optimized ZnS out-coupling layer.With a 24-nm out-coupling layer,the reflectivity of the cathode is reduced to 8% at 492 nm and the mean reflectivity is 24% in the visible area.By introducing an efficient electron blocking layer tris（1phenylpyrazolato,N,C2 ＇）iridium（III）（Ir（ppz） 3） to confine the exciton recombination area,the current efficiency and the colour stability of the device are effectively improved.A white emission with the Ir（ppz） 3 layer exhibits a maximum current efficiency of 9.8 cd/A at 8 V,and the Commission Internationale de L＇Eclairage（CIE） chromaticity coordinates are almost constant during a large voltage change of 6 V-11 V.There is almost no viewing angular dependence in the spectrum when the viewing angle is no more than 45,with a CIE x,y coordinate variation of only（±0.0025,±0.0008）.Even at a large viewing angle（75）,the CIE x,y coordinate change is as small as（±0.0087,±0.0013）.

Improved performance of InGaN light-emitting diodes with a novel sawtooth-shaped electron blocking layer

A sawtooth-shaped electron blocking layer is proposed to improve the performance of light-emitting diodes （LEDs）. The energy band diagram, the electrostatic field in the quantum well, the carrier concentration, the electron leakage, and the internal quantum efficiency are systematically studied. The simulation results show that the LED with a sawtooth-shaped electron blocking layer possesses higher output power and a smaller efficiency droop than the LED with a conventional A1GaN electron blocking layer, which is because the electron confinement is enhanced and the hole injection efficiency is improved by the appropriately modified electron blocking layer energy band.

Performance improvement of blue InGaN light-emitting diodes with a specially designed n-AlGaN hole blocking layer

Blue InGaN light-emitting diodes （LEDs） with a conventional electron blocking layer （EBL）, a common n-A1GaN hole blocking layer （HBL）, and an n-A1GaN HBL with gradual A1 composition are investigated numerically, which involves analyses of the carrier concentration in the active region, energy band diagram, electrostatic field, and internal quantum efficiency （IQE）. The results indicate that LEDs with an n-AIGaN HBL with gradual AI composition exhibit better hole injection efficiency, lower electron leakage, and a smaller electrostatic field in the active region than LEDs with a conven tional p-A1GaN EBL or a common n-A1GaN HBL. Meanwhile, the efficiency droop is alleviated when an n-A1GaN HBL with gradual A1 composition is used.

High Efficiency Blue Phosphorescent Organic Lighting-emitting Diodes with Novel Anode Structure

High-efficiency blue electrophosphorescent organic light-emitting devices employing MoO3 used as hole injection layer （HIL） and MoO3 doped N,N-dicarbazoly-3,5-benzene （mCP） as hole transport layer （HTL） were demonstrated. The blue OLED with the novel anode structure and TAPC used as electron blocking layer show a low turn-on voltage of 2.4 V, a maximum power efficiency of 33.6 lm/W at 3.1 V and 25 lrn/W with 1 000 cd/m2 at 3.8 V. It is also found that the efficiency of the devices is dependent on the different EBL materials. This is may because of relationship with the charge mobility and the triplet energy level of EBL materials. The device efficiency is determined by the charge balance which plays an important role.

Effect of Mg-Preflow for p-AlGaN Electron Blocking Layer on the Electroluminescence of Green LEDs with V-Shaped Pits

In GaN-based green light-emitting diodes（LEDs） with and without Mg-preflow before the growth of p-Al GaN electron blocking layer（EBL） are investigated experimentally.A higher Mg doping concentration is achieved in the EBL after Mg-preflow treatment,effectively alleviating the commonly observed efficiency collapse and electrons overflowing at cryogenic temperatures.However,unexpected decline in quantum efficiency is observed after Mg-preflow treatment at room temperature.Our conclusions are drawn such that the efficiency decline is probably the result of different emission positions.Higher Mg doping concentration in the EBL after Mg-preflow treatment will make it easier for a hole to be injected into multiple quantum wells with emission closer to pGaN side through the（8-plane rather than the V-shape pits,which is not favorable to luminous efficiency due to the preferred occurrence of accumulated strain relaxation and structural defects in upper QWs closer to p-GaN.Within this framework,apparently disparate experimental observations regarding electroluminescence properties,in this work,are well reconciled.

A route to truly realize the chirality-specific growth of aligned carbon nanotubes

Single-walled carbon nanotubes（SWNTs）are regarded as one of the most promising candidates as building blocks in the next generation electronics.The most advanced opportunities demand the ability to form perfectly aligned,horizontal arrays of SWNTs with a uniform structure.However,synthesizing them by conventional chemical vapor deposition（CVD）methods would result in poorly-aligned nanotubes with a variety of chiral species,