Visible to deep ultraviolet range optical absorption of electron irradiated borosilicate glass

To study the room-temperature stable defects induced by electron irradiation, commercial borosilicate glasses were irradiated by 1.2 MeV electrons and then ultraviolet（UV） optical absorption（OA） spectra were measured. Two characteristic bands were revealed before irradiation, and they were attributed to silicon dangling bond（E＇-center） and Fe^3＋species,respectively. The existence of Fe3＋was confirmed by electron paramagnetic resonance（EPR） measurements. After irradiation, the absorption spectra revealed irradiation-induced changes, while the content of E＇-center did not change in the deep ultraviolet（DUV） region. The slightly reduced OA spectra at 4.9 eV was supposed to transform Fe3＋species to Fe^2＋species and this transformation leads to the appearance of 4.3 eV OA band. By calculating intensity variation, the transformation of Fe was estimated to be about 5% and the optical absorption cross section of Fe2＋species is calculated to be 2.2 times larger than that of Fe^3＋species. Peroxy linkage（POL, ≡Si–O–O–Si≡）, which results in a 3.7 eV OA band, is speculated not to be from Si–O bond break but from Si–O–B bond, Si–O–Al bond, or Si–O–Na bond break. The co-presence defect with POL is probably responsible for 2.9-eV OA band.

XPS and Raman studies of electron irradiated sodium silicate glass

The microstructure modifications of sodium silicate glass induced by 1.2-MeV electron irradiation are studied by x-ray photoelectron spectroscopy and Raman spectroscopy. Depth profile analyses are also performed on the irradiated glass at 109 Gy. A sodium-depleted layer with a thickness of a few tens of nanometers and the corresponding increase of network polymerization on the top surface are observed after electron bombardment, while the polymerization in the subsurface region has a negligible variation with the irradiation dose. Moreover, the formation of molecular oxygen after electron irradiation is evidenced, which is mainly aggregated in the first two-micron-thick irradiated glass surface. These modifications are correlated to the network relaxation process as a consequence of the diffusion and desorption of sodium species during electron irradiation.

Crystallization of a Ti-based Bulk Metallic Glass Induced by Electropulsing Treatment

The effect of electropulsing treatment（EPT）on the microstructure of a Ti-based bulk metallic glass（BMG）has been studied.The maximum current density applied during EPT can exert a crucial role on tuning the microstructure of the BMG.When the maximum current density is no more than 2 720A/mm^2,the samples retains amorphous nature,whereas,beyond that,crystalline phases precipitate from the glassy matrix.During EPT,the maximum temperature within the samples EPTed at the maximum current densities larger than 2 720A/mm^2 is higher than the crystallization temperature of the BMG,leading to the crystallization event.