An optical readout uncooled infrared detector, employing a substrate-free focal plane array with pitch size 60μm, is established. The reflector deformation induced by the stress mismatching of the bi-layer structure ...An optical readout uncooled infrared detector, employing a substrate-free focal plane array with pitch size 60μm, is established. The reflector deformation induced by the stress mismatching of the bi-layer structure is discussed and, in turn, a universal solution to determine both the optical readout sensitivity and the optimal filter position is found. By applying this solution, the optical readout sensitivity for the ideal plane reflector could theoretically increase by 80% as compared with the conventional operation, and the sensitivity loss caused by the reflector deformation can also be reduced to a reasonable level.展开更多
Bending and first flexural mode vibration behavior of electrostatic actuated nanometer-sized interdigitated cantilever arrays are characterized under vacuum conditions. The pull-in＇＇ effect in dc driving and the har...Bending and first flexural mode vibration behavior of electrostatic actuated nanometer-sized interdigitated cantilever arrays are characterized under vacuum conditions. The pull-in＇＇ effect in dc driving and the hard spring effect＇＇ in ac driving are observed. A mass sensitivity of 20 fg is expected for our devices due to the ultra-small mass of the arm and relative high Q factor. The mass-spring lump model combined with Green＇s function method is used to fit the dc driving behaviors including the pull-in voltage. For the ac driving case, the polynomial expansion of the capacitive force is used in the model. The successfully fittings of the pull-in voltage and the hard spring effect prove that our simulation method could be used for guiding the geometrical design of cantilever-based sensors.展开更多
A three-dimensional finite element model for phase change random access memory （PCRAM） is established for comprehensive electrical and thermal analysis during SET operation. The SET behaviours of the heater additio...A three-dimensional finite element model for phase change random access memory （PCRAM） is established for comprehensive electrical and thermal analysis during SET operation. The SET behaviours of the heater addition structure （HS） and the ring-type contact in bottom electrode （RIB） structure are compared with each other. There are two ways to reduce the RESET current, applying a high resistivity interracial layer and building a new device structure. The simulation resuIts indicate that the variation of SET current with different power reduction ways is little. This study takes the RESET and SET operation current into consideration, showing that the RIB structure PCRAM cell is suitable for future devices with high heat efficiency and high-density, due to its high heat efficiency in RESET operation.展开更多
Beam measurement is very important for accelerators. In this paper, modern digital beam measurement techniques based on I Q（In-phase ＆ Quadrature-phase） analysis are discussed. Based on this method and highspeed hi...Beam measurement is very important for accelerators. In this paper, modern digital beam measurement techniques based on I Q（In-phase ＆ Quadrature-phase） analysis are discussed. Based on this method and highspeed high-resolution analog-to-digital conversion, we have completed three beam measurement electronics systems designed for the China Spallation Neutron Source（CSNS）, Shanghai Synchrotron Radiation Facility（SSRF）, and Accelerator Driven Sub-critical system（ADS）. Core techniques of hardware design and real-time system calibration are discussed, and performance test results of these three instruments are also presented.展开更多
基金Supported by grants from by the Natural Science Foundation of China under Grant Nos 10732080, 10627201 and 10872191, and the National Basic Research Program of China under Grant No 2006CB300404.
文摘An optical readout uncooled infrared detector, employing a substrate-free focal plane array with pitch size 60μm, is established. The reflector deformation induced by the stress mismatching of the bi-layer structure is discussed and, in turn, a universal solution to determine both the optical readout sensitivity and the optimal filter position is found. By applying this solution, the optical readout sensitivity for the ideal plane reflector could theoretically increase by 80% as compared with the conventional operation, and the sensitivity loss caused by the reflector deformation can also be reduced to a reasonable level.
文摘Bending and first flexural mode vibration behavior of electrostatic actuated nanometer-sized interdigitated cantilever arrays are characterized under vacuum conditions. The pull-in＇＇ effect in dc driving and the hard spring effect＇＇ in ac driving are observed. A mass sensitivity of 20 fg is expected for our devices due to the ultra-small mass of the arm and relative high Q factor. The mass-spring lump model combined with Green＇s function method is used to fit the dc driving behaviors including the pull-in voltage. For the ac driving case, the polynomial expansion of the capacitive force is used in the model. The successfully fittings of the pull-in voltage and the hard spring effect prove that our simulation method could be used for guiding the geometrical design of cantilever-based sensors.
文摘A three-dimensional finite element model for phase change random access memory （PCRAM） is established for comprehensive electrical and thermal analysis during SET operation. The SET behaviours of the heater addition structure （HS） and the ring-type contact in bottom electrode （RIB） structure are compared with each other. There are two ways to reduce the RESET current, applying a high resistivity interracial layer and building a new device structure. The simulation resuIts indicate that the variation of SET current with different power reduction ways is little. This study takes the RESET and SET operation current into consideration, showing that the RIB structure PCRAM cell is suitable for future devices with high heat efficiency and high-density, due to its high heat efficiency in RESET operation.
基金Supported by National Natural Science Foundation of China(11205153,10875119)Knowledge Innovation Program of the Chinese Academy of Sciences(KJCX2-YW-N27)+1 种基金the Fundamental Research Funds for the Central Universities(WK2030040029)the CAS Center for Excellence in Particle Physics(CCEPP)
文摘Beam measurement is very important for accelerators. In this paper, modern digital beam measurement techniques based on I Q（In-phase ＆ Quadrature-phase） analysis are discussed. Based on this method and highspeed high-resolution analog-to-digital conversion, we have completed three beam measurement electronics systems designed for the China Spallation Neutron Source（CSNS）, Shanghai Synchrotron Radiation Facility（SSRF）, and Accelerator Driven Sub-critical system（ADS）. Core techniques of hardware design and real-time system calibration are discussed, and performance test results of these three instruments are also presented.
